These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (SLR) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.coast.noaa.gov/slr This metadata record describes the Honolulu Weather Forecast Office (HFO WFO) digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications for the Honolulu WFO, which includes the following islands in Hawaii: Kauai, Oahu, Molokai, Maui, Lanai, and Hawaii. The DEM is derived from multiple sources. 1. 2006 Hawaii FEMA Lidar - acquired by FEMA along south shores of islands 2. 2007 USACE Pacific Islands Lidar: Hawaiian Islands - acquired by USACE and Hawaii State Civil Defense along north and windward facing shores of islands Hydrographic breaklines were delineated from LiDAR intensity imagery generated from the LiDAR datasets. The final DEM is hydro flattened such that water elevations are less than or equal to -0.5 meters. The DEM is referenced vertically to the Local Mean Sea Level (LMSL) tidal datum with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (SLR) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.coast.noaa.gov/slr This metadata record describes the Honolulu Weather Forecast Office (HFO WFO) digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications for the Honolulu WFO, which includes the following islands in Hawaii: Kauai, Oahu, Molokai, Maui, Lanai, and Hawaii. The DEM is derived from multiple sources. 1. 2006 Hawaii FEMA Lidar - acquired by FEMA along south shores of islands 2. 2007 USACE Pacific Islands Lidar: Hawaiian Islands - acquired by USACE and Hawaii State Civil Defense along north and windward facing shores of islands Hydrographic breaklines were delineated from LiDAR intensity imagery generated from the LiDAR datasets. The final DEM is hydro flattened such that water elevations are less than or equal to -0.5 meters. The DEM is referenced vertically to the Local Mean Sea Level (LMSL) tidal datum with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (SLR) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.coast.noaa.gov/slr This metadata record describes the Honolulu Weather Forecast Office (HFO WFO) digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications for the Honolulu WFO, which includes the following islands in Hawaii: Kauai, Oahu, Molokai, Maui, Lanai, and Hawaii. The DEM is derived from multiple sources. 1. 2006 Hawaii FEMA Lidar - acquired by FEMA along south shores of islands 2. 2007 USACE Pacific Islands Lidar: Hawaiian Islands - acquired by USACE and Hawaii State Civil Defense along north and windward facing shores of islands Hydrographic breaklines were delineated from LiDAR intensity imagery generated from the LiDAR datasets. The final DEM is hydro flattened such that water elevations are less than or equal to -0.5 meters. The DEM is referenced vertically to the Local Mean Sea Level (LMSL) tidal datum with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (SLR) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: http://www.coast.noaa.gov/slr This metadata record describes the Pago Pago Weather Service (PPG WSO) digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications for the Pago Pago WSO, which includes the following islands in American Samoa: Tutuila, Aunu'u, Ofu, Olosega, Tau, and Rose Atoll. The DEM is derived from the following source. 1. 2012 American Samoa Lidar - acquired by NOAA and partners Hydrographic breaklines were delineated from LiDAR intensity imagery generated from the LiDAR datasets. The final DEM is hydro flattened such that water elevations are less than or equal to -0.5 meters. The DEM is referenced vertically to the American Samoa Vertical Datum of 2002 (ASVD02) with vertical units of meters and horizontally to the North American Datum of 1983 (PACP00). The resolution of the DEM is 3 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. This metadata record describes the aggregate DEM and WFO specific metadata exists for each WFO. The DEM includes the best available lidar data known to exist at the time of DEM creation for each WFO. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters, though some areas may have higher resolution.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Catalina California digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Catalina Island, California. The DEM was produced from the following lidar data sets: 1. 2015 - 2016 LARIAC Lidar: Los Angeles Region, CA The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer depicting potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise (slr) and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://www.coast.noaa.gov/slr These data depict the potential inundation of coastal areas resulting from current Mean Higher High Water (MHHW) conditions. The process used to produce the data can be described as a modified bathtub approach that attempts to account for both local/regional tidal variability as well as hydrological connectivity. The process uses two source datasets to derive the final inundation rasters and polygons and accompanying low-lying polygons: the Digital Elevation Model (DEM) of the area and a tidal surface model that represents spatial tidal variability. The tidal model is created using the NOAA National Geodetic Survey's VDATUM datum transformation software (http://vdatum.noaa.gov) in conjunction with spatial interpolation/extrapolation methods and represents the MHHW tidal datum in orthometric values (North American Vertical Datum of 1988). The model used to produce these data does not account for erosion, subsidence, or any future changes in an area's hydrodynamics. It is simply a method to derive data in order to visualize the potential scale, not exact location, of inundation from sea level rise. Both raster and vector data are provided. The raster data represent both the horizontal extent of inundation and depth above ground, in meters. The vector data represent the horizontal extent of both hydrologically connected and unconnected inundation. The vector "slr" data represent inundation that is hydrologically connected to the ocean. The vector "low" data represent areas that are hydrologically unconnected to the ocean, but are below MHHW and may also flood. For more information, contact coastal.info@noaa.gov.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Florida Panhandle, West digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Escambia, Santa Rosa, Okaloosa and Walton Counties. The DEM was produced from the following lidar data sets: 1. 2017 NWFWMD Escambia and Santa Rosa FL Lidar 2. 2017 NWFWMD Lower Choctawhatchee Lidar 3. 2018 USGS Panhandle FL Lidar 4. 2018 Leon County 5. 2008 NWFWMD Lidar: Walton County (Eglin AFB) 6. 2007 FDEM Coastal Lidar: Coastal Okaloosa County 7. 2008 NWFWMD Lidar: Inland Okaloosa County 8. 2006 NWFWMD Lidar: Escambia, Santa Rosa, and Walton Counties The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Puerto Rico digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM data includes Puerto Rico, Vieques, Culebra, and Isla de Mona. The DEM was produced from the following lidar data sets: 1. 2018 USGS Lidar DEM: Post Hurricane Maria - Puerto Rico 2. 2016 - 2017 USGS Lidar DEM: Puerto Rico The DEM is referenced vertically to the Puerto Rico Vertical Datum of 2002 (PRVD02, Geoid12B) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83 2011). The resolution of the DEM is approximately 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Washington, Northwest Puget Sound digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Island, San Juan, Skagit, Snohomish, and Whatcom Counties. The DEM was produced from the following lidar data sets: 1. 2019 NOAA Lidar: Padilla Bay NERR and Skagit River Delta, WA 2. 2016 West Washington Lidar 3. 2014 Island County, WA Lidar 4. 2014 USACE/USGS Topobathy Lidar: Puget Sound (WA) 5. 2014 PSLC Lidar: Cedar River Watershed Project - Delivery 1 6. 2013 Puget Sound Lidar Consortium (PSLC) Nooksack River Lidar 7. 2013 City of Bellingham Lidar 8. 2013 San Juan County, WA Lidar 9. 2009 Puget Sound Lidar Consortium (PSLC) Lidar: San Juan County and Lummi Island 10. 2006 USGS Lidar: North Puget Sound, Washington 11. 2005 Puget Sound Lidar Consortium (PSLC) Lidar: Nooksack River - Lummi Tribe (Puget Sound Lowland Project) The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88, Geoid12B) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.