The Conductivity, Temperature and Depth (CTD) and other data were collected in NE Pacific (limit-180) as part of Fieberling Seamount project. Data was collected from Ship NEW HORIZON. The data was collected over a period spanning from August 19, 1989 and September 1, 1989. Data was submitted in three diskettes by Dr. Gunnar Roden, University of Washington, Seattle, WA. Data has been processed and is available in F022-CTD-Hi Resolution file format of NODC. F022 High-resolution CTD data is collected from high resolution (conductivity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1 m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t) and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals.

The Conductivity, Temperature and Depth (CTD) and other data were collected in NE Pacific (limit-180). Data was collected from Ship MOANA WAVE cruises MW9010 & MW9012. The data was collected over a period spanning from August 6, 1990 and December 13, 1990. Data was submitted via File transfer protocol by Dr. Pierre Flament, University of Hawaii at Manoa, Honolulu, HI. Data has been processed and is available in F022-CTD-Hi Resolution file format of NODC.

Conductivity, Temperature, Depth (CTD) and other data from multiple ships and other platforms were collected from NE Pacific (limit-180) from February 26, 1982 to April 5, 1983. The data was collected as part of Coastal Ocean Dynamics Experiment and submitted by Oregon State University. The bathythermograph XBT data is in C116 format of NODC while the CTD hi resolution data is in F022 format.

The Conductivity, Temperature and Depth (CTD) and other data were collected. R/V Oceanus was used to collect data. The data was collected from 76 stations over one month period spanning from June 15, 1983 to July 11, 1983 in NW Atlantic (limit-40 W). Data was submitted by Dr. Nelson Hogg of Woods Hole Oceanographic Institution (WHOI), Woods Hole, MA in a tape. The originator's data has been processed by NODC and is currently available in F022-CTD Hi resolution file format.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) and High-Resolution CTD/STD (F022) formats. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

The Conductivity, Temperature and Depth (CTD) and other data were collected using R/V Endeavor from NE Atlantic (limit-40 W). The data was collected over a 15 day period spanning from May 3 to May 18, 1986 by Woods Hole Oceanographic Institution (WHOI), Woods Hole, MA. Data was submitted by Dr. Terry Joyce. The data has been processed and is available in F022-CTD Hi resolution file format of NODC.

The conductivity, temperature and depth (CTD) data in this accession was collected off of NE Atlantic (limit-40 W) using Oceanus and Conrad ships. The data was collected between October 1979 and March 1980 by Lamont-Doherty Earth Observatory, Palisades, NY. The data was submitted by Rennie Sarah and has been processed by NODC. The data is currently available in the F022 CTD hi resolution format.

The Conductivity, Temperature and Depth (CTD) and other data were collected in NW Atlantic (limit-40 W). Data was collected from Ship ENDEAVOR cruise 214. The data was collected over a period spanning from June 24, 1990 to July 7, 1990. Data was submitted in a tape by Dr. Robert Pickart, Woods Hole Oceanographic Institution, Woods Hole, MA. Data has been processed and is available in F022-CTD-Hi Resolution file format of NODC. F022 High-resolution CTD data is collected from high resolution (conductivity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1 m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t) and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals.

STD data (smoothed) at one meter intervals for the Cruise Piquero, Leg 7. Data has been processed by NODC to the NODC standard High-Resolution CTD/STD (F022) format. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

The Conductivity, Temperature and Depth (CTD) and other data were collected in NE Pacific (limit-180) as part of Fisheries-Oceanography Coordinated Investigations (FOCI) project. Data was collected from NOAA Ship MILLER FREEMAN. The data was collected over a period spanning from April 2, 1991 and October 5, 1991. Tape containing 287 castes of CTD was submitted by Ms. Leslie Lawrence of Pacific Marine Environmental Laboratory (PMEL), Seattle, WA. This dataset contains high-resolution data collected using CTD (conductivity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1 m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t) and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. Data has been processed and is available in F022-CTD-Hi Resolution file format of NODC.