데이터셋 상세
미국
2.5-min Isostatic Gravity Grid for the United States
The 2.5-min isostatic gravity data set was produced by regridding the 4-km residual isostatic gravity grid of the U.S. The isostatic residual gravity grid was developed by the U.S. Geological Survey using an Airy Heiskanen model. Local compensation was computed with a depth of 30.0 km to the root for sites with sea level elevations and a density contrast of 0.35 g/cm3 across the bottom of the root.
데이터 정보
연관 데이터
U.S. Isostatic Residual Gravity Grid
공공데이터포털
isores.bin - standard grid containing isostatic residual gravity map for U.S. Grid interval = 4 km. Projection is Albers (central meridian = 96 degrees West; base latitude = 0 degrees North). Sea level depth of compensation = 30.0 km, density contrast at depth = 0.35 g/cm^^3. Values are in milligals.
Idaho Batholith Study Area Isostatic Gravity Grid
공공데이터포털
A 2 kilometer isostatic gravity grid for the Idaho batholith study area. Number of columns is 331 and number of rows is 285. The order of the data is from the lower left to the right and then up one row.
U.S. Topographic Grid
공공데이터포털
isotop.bin - topographic data for conterminous U.S. projected on an 8 km grid. Projection is Albers, central meridian = 96 degrees West, base latitude = 0 degrees North. Elevations are in meters.
Bouguer Gravity Grid for Idaho
공공데이터포털
A 2.5 kilometer Bouguer anomaly grid for the state of Idaho. Number of columns is 215 and number of rows is 320. The order of the data is from the lower left to the right and then up one row.
Nevada Isostatic Gravity Grid
공공데이터포털
A 2 kilometer Isostatic anomaly grid for the state of Nevada. Number of columns is 269 and number of rows is 394. The order of the data is from the lower left to the right and then up one row.
Utah Bouguer Gravity Grid
공공데이터포털
A 2.5 kilometer Bouguer anomaly grid for the state of Utah. Number of columns is 196 and number of rows is 245. The order of the data is from the lower left to the right and then up one row.
Idaho Batholith Study Area Density Grid
공공데이터포털
A 2 kilometer terrace-density grid for the Idaho batholith study area. Number of columns is 331 and number of rows is 285. The order of the data is from the lower left to the right and then up one row.
Idaho Batholith Study Area Bouguer Gravity Grid
공공데이터포털
A 2 kilometer Bouguer gravity anomaly grid for the Idaho batholith study area. Number of columns is 331 and number of rows is 285. The order of the data is from the lower left to the right and then up one row.
Maine Bouguer Gravity Grid
공공데이터포털
A 2 kilometer Bouguer anomaly grid for the state of Maine. Number of columns is 197 and number of rows is 292. The order of the data is from the lower left to the right and then up one row.
U.S. Geoid Heights, Scientific Model (G96SSS)
공공데이터포털
This 2' geoid height grid for the conterminous United States is the G96SSS model. The computation used about 1.8 million terrestrial and marine gravity data held in the National Geodetic Survey gravity data base in July 1996. These data were augmented by gravity data contributions from NGA (former National Imagery and Mapping Agency (former Defence Mapping Agency)). By means of a Fast Fourier Transform (FFT) technique, high frequency corrections were made to an underlying EGM96 geopotential model through a remove, compute, and restore process. The gravity values are based on the International Gravity Standardization Net 1971 (IGSN71). The geoid heights are referred to the Geodetic Reference System 1980 (GRS80) ellipsoid. Unlike GEOID96, the G96SSS grid does not incorporate GPS on leveled benchmarks. The G96SSS model is a gravimetric geoid in a geocentric, ITRF94(1996.0) reference frame. It is necessary to subtract 12.0 cm from the G96SSS values to obtain the geoid undulation between the best-fit global geopotential surface and the GRS80 ellipsoid (both expressed in a tide free system). Additional information is available at: http://www.ngs.noaa.gov We are particularly grateful to NGA (former National Imagery and Mapping Agency) for their assistance and their data contributions.