NOAA Chesapeake Bay MD1902 and MD1903 Topobathymetric lidar data were collected by NV5 Geospatial (NV5) using a Leica Chiroptera 4x system. The MD1903 acquisition spanned from 20191109-20191115 in 5 missions. The MD1902 acquisition spanned from 20191109-20191116 in 6 missions. The datasets include topobathymetric data in LAS format 1.4, point data record format 6, with the following classifications in accordance with project specifications and the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards: 1 - unclassified 2 - ground 7 - noise 40 - bathymetric bottom or submerged topography 41 - water surface 43 - submerged feature 45 - water column 46 - overlap bathy bottom - temporally different from a separate lift 71 - unclassified associated with areas of overlap bathy bottom/temporal bathymetric differences 72 - ground associated with areas of overlap bathy bottom/temporal bathymetric differences 81 - water surface associated with areas of overlap bathy bottom/temporal bathymetric differences 85 - water column associated with areas of overlap bathy bottom/temporal bathymetric differences 1 Overlap - edge clip 1 Withheld- green sensor returns within topographic areas 42 Synthetic - synthetic water surface These data sets also includes lidar intensity values, number of returns, return number, time, and scan angle. The 100 meter buffered NOAA Chesapeake Bay MD1902 project area covers approximately 260.195 square kilometers in an area encompassing Severn River to Rhode River near Annapolis, Maryland. LAS files were compiled in 500 m x 500 m tiles. The final classified lidar data were then transformed from ellipsoid to geoidal height (Geoid12b) and used to create 23 - 5,000 m x 5,000 m topobathymetric DEMs in GeoTIFF format with 1m pixel resolution. The 100 meter buffered NOAA Chesapeake Bay MD1903 project area covers approximately 273.518 square kilometers in an area encompassing West River to Dares Beach near Annapolis, Maryland. LAS files were compiled in 500 m x 500 m tiles. The final classified lidar data were then transformed from ellipsoid to geoidal height (Geoid12b) and used to create 18 - 5,000m x 5,000 m topobathymetric DEMs in GeoTIFF format with 1m pixel resolution.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ820G system. The data were acquired from 20160721 - 20161121. The data includes topobathy data in an LAS 1.2 format file classified as unclassified (1), noise (7), and bathymetric point (26) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set may also include lidar intensity values and encoded RGB image values. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Geodetic Survey (NGS), Remote Sensing Division Title: Chief, Remote Sensing Division Phone: 240-533-9576

These data were collected by Dewberry using a CZMIL Nova system. The data were acquired from 20210126 - 20210227. The data include topobathy data in LAS 1.4 format classified as unclassified (1); ground (2); low noise (7); high noise (18); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); and no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45) in accordance with project specifications; temporal surface not used in bathymetric classification (65). This dataset consists of approximately 225 square miles of data along the shores of Tampa Bay and contains 3,180 500 m x 500 m lidar tiles.

These data were collected by NOAA using a Riegl VQ880G sensor. The data were acquired from May 11, 2016 through May 14, 2016. The data includes topobathy data in LAS 1.2 format classified as created, unclassified (1); ground (2); noise (7); bathymetric noise (22); water column (25); bathymetric bottom (26); water surface (27); International Hydrographic Organization S-57 object, not otherwise specified (30); in accordance with project specifications. The project consists of approximately 85 square miles of data along the shores of Boca Grande. This dataset contains 1,053 500 m x 500 m lidar tiles.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ880G system. The data were acquired from 20170216 - 20170220. The data includes topobathy data in an LAS 1.2 format file classified as unclassified (1), ground (2), noise (7), bathymetric point (26), submerged object (29), and International Hydrographic Organization (IHO) S-57 object (30) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set may also include lidar intensity values and encoded RGB image values. The DEM was created from the bathymetric points (class 26) using las2dem from LAStools and GDAL.

This data was collected by NOAA using a Riegl VQ880G sensor. The data was acquired August 5, 2017. The data includes topobathy data in LAS 1.2 format classified as created,unclassified (1); ground (2); topographic noise (7); bathymetric noise (22); water column (25); bathymetric bottom (26); water surface (27); International Hydrographic Organization S-57 object; not otherwise specified (30), in accordance with project specifications. The project consists of approximately 34 square miles of data along the shores of St. Jeromes Creek. This dataset contains 342 500 m x 500 m lidar tiles.

These data were collected by Leading Edge Geomatics using a Riegl VQ-880-G II sensor. The data acqusition began January 20, 2019 through June 2, 2019. The data includes topobathy data in LAS 1.4 format classified as created, never classified (0); unclassified (1); ground (2); noise (7); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); International Hydrographic Organization S-57 object, not otherwise specified (44); no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45); bathymetic bottom temporal changes (46) in accordance with project specifications.

These data were collected by the National Oceanic and Atmospheric Administration (NOAA), National Geodetic Survey (NGS), Remote Sensing Devision (RSD), Coastal Mapping Program (CMP) using a Riegl VQ880G system. Quantum Spatial Inc (QSI) was contracted by NOAA to process the topobathymetic LiDAR data. The NOAA Miami Florida Intracoastal Topobathy (Miami Intracoastal) data were acquired from 20170224 - 20170310 in five missions. The Miami Intracoastal dataset includes topobathy data in a LAS 1.2 format file with the following classification: unclassified (1), ground (2), noise (7), overlap default (19), overlap ground (20), overlap water column (21), water column (25), bathymetric bottom or submerged topography (26), submerged feature (29), and temporal bathy bottom (31) in accordance with project specifications. The contracted project consists of approximately 53,381 acres along the Atlantic Coast of Miami, Florida. This dataset delivery represents the full NOAA Miami Florida Intracoastal Topobathy LiDAR Processing area. LAS files were compiled by 500 m x 500 m tiles. The final classified LiDAR data were then used to create topobathymetric DEMs in IMG format with 1m pixel resolution. This Miami Intracoastal dataset represents an area covering 15 - 5000 m x 5000 m DEM tiles.

NOAA Florence Topobathymetric Lidar data were collected by NV5 Geospatial (NV5) in 9 blocks from 20191126 - 20200825 using the follow sensors: Block01 -Riegl VQ880GII system Block02 - Riegl VQ-880-G and Riegl VQ-880-GII systems Block03 - Riegl VQ880G, Riegl VQ880GII, and Riegl VQ880GH systems Block04 - Riegl VQ880GII and Leica Chiroptera 4x systems Block05 - Riegl VQ880GII, Leica Chiroptera 4x and Hawkeye systems Block06 - Riegl VQ880GII, Leica Chiroptera 4x and Hawkeye systems Block07 - Riegl VQ880G, Riegl VQ880GII, and Leica Chiroptera 4x systems Block08 - Riegl VQ880G and Riegl VQ880GII systems Block09 - Riegl VQ880G and Riegl VQ880GII systems This dataset includes topobathymetric data in a LAS format 1.4, point data record format 6, with classifications in accordance with project specifications and the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set also includes LiDAR intensity values, number of returns, return number, time, and scan angle. The 100 meter buffered project area consists of approximately 3,075,010 acres along the Eastern coast of Virginia, North Carolina, and South Carolina.

These data were collected by Leading Edge Geomatics using a Riegl VQ-880-G II sensor. The data acqusition began January 20, 2019 through June 2, 2019. The data includes topobathy data in LAS 1.4 format classified as created, never classified (0); unclassified (1); ground (2); noise (7); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); International Hydrographic Organization S-57 object, not otherwise specified (44); no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45); bathymetic bottom temporal changes (46) in accordance with project specifications.