These data were collected by Dewberry using a CZMIL Nova system. The data were acquired from 20210126 - 20210227. The data include topobathy data in LAS 1.4 format classified as unclassified (1); ground (2); low noise (7); high noise (18); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); and no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45) in accordance with project specifications; temporal surface not used in bathymetric classification (65). This dataset consists of approximately 225 square miles of data along the shores of Tampa Bay and contains 3,180 500 m x 500 m lidar tiles.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ820G system. The data were acquired from 20140717 - 20140809 in twenty two missions. The missions flown on 20140718, 20140719, 20140720, 20140721, 20140722, 20140723, 20140724, 20140725, 20140731, 20140806, and 20140807 represent the Low Water missions and the missions flown on 20140717, 20140718, 20140719, 20140722, 20140723, 20140725, 20140731, 20140801, 20140807, 20140808, and 20140809 represent the High Water (everything outside of MLLW tidal requirements) missions. The data includes topobathy data in an LAS 1.2 format file classified as unclassified (1), ground (2), topo noise (7), refracted High Water data landward of the MLLW land/water interface (18), bathy noise (22), noise as defined by the sensor (23), refracted sensor noise (24), water column (25), bathymetric bottom or submerged topography (26), water surface (27), International Hydrographic Organization (IHO) S-57 objects (30), and temporal bathy bottom (31) in accordance with project specifications. The original project consisted of approximately 100 square miles along the Atlantic Coast of Rhode Island. The full project including buffered area and all flightline coverage is approximately 205 square miles. This dataset represents a contiguous area covering 2104 - 500 m x 500 m lidar tiles. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Geodetic Survey (NGS), Remote Sensing Division Phone: 301-713-2663

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ820G system. The data were acquired from 20160721 - 20161121. The data includes topobathy data in an LAS 1.2 format file classified as unclassified (1), noise (7), and bathymetric point (26) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set may also include lidar intensity values and encoded RGB image values. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Geodetic Survey (NGS), Remote Sensing Division Title: Chief, Remote Sensing Division Phone: 240-533-9576

The NOAA Hurricane Irma Supplemental Topobathymetric LiDAR Project area data were collected by Quantum Spatial, Inc. (QSI) using three Riegl systems: a Riegl VQ-880-G+, a Riegl VQ-880-GII, and a Riegl VQ-880-GH. The NOAA Hurricane Irma project acquisition dates spanned from 20181120-20190323 in 85 missions. This project dataset includes topobathymetric data in a LAS format 1.4, point data record format 6, with the following classifications in accordance with project specifications and the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards: 1 - unclassified 2 - ground 7 - noise 40 - bathymetric bottom or submerged topography 41 - water surface 43 - submerged feature 45 - water column 46 - overlap bathy bottom - temporally different from a separate lift 71 - unclassified associated with areas of overlap bathy bottom/temporal bathymetric differences 72 - ground associated with areas of overlap bathy bottom/temporal bathymetric differences 81 - water surface associated with areas of overlap bathy bottom/temporal bathymetric differences 85 - water column associated with areas of overlap bathy bottom/temporal bathymetric differences 1 Overlap - edge clip Please note that classifications 46,71,72,81, and 85 associated with temporal bathymetric differences have only undergone automated classification and have not been manually reviewed. This data set also includes LiDAR intensity values, number of returns, return number, time, and scan angle. The 100 meter buffered project area consists of approximately 1,381,270 acres and stretches from the eastern coast of Miami, south and westward to the Marquesas Keys. LAS files were compiled in 500 m x 500 m tiles. This complete project dataset is comprised of 23,926 - 500 m x 500 m LAS tiles.

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl VQ880G system. The data were acquired from 20170216 - 20170220. The data includes topobathy data in an LAS 1.2 format file classified as unclassified (1), ground (2), noise (7), bathymetric point (26), submerged object (29), and International Hydrographic Organization (IHO) S-57 object (30) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set may also include lidar intensity values and encoded RGB image values. The DEM was created from the bathymetric points (class 26) using las2dem from LAStools and GDAL.

This data was collected by NOAA using a Riegl VQ880G sensor. The data was acquired August 5, 2017. The data includes topobathy data in LAS 1.2 format classified as created,unclassified (1); ground (2); topographic noise (7); bathymetric noise (22); water column (25); bathymetric bottom (26); water surface (27); International Hydrographic Organization S-57 object; not otherwise specified (30), in accordance with project specifications. The project consists of approximately 34 square miles of data along the shores of St. Jeromes Creek. This dataset contains 342 500 m x 500 m lidar tiles.

NOAA Chesapeake Bay MD1902 and MD1903 Topobathymetric lidar data were collected by NV5 Geospatial (NV5) using a Leica Chiroptera 4x system. The MD1903 acquisition spanned from 20191109-20191115 in 5 missions. The MD1902 acquisition spanned from 20191109-20191116 in 6 missions. The datasets include topobathymetric data in LAS format 1.4, point data record format 6, with the following classifications in accordance with project specifications and the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards: 1 - unclassified 2 - ground 7 - noise 40 - bathymetric bottom or submerged topography 41 - water surface 43 - submerged feature 45 - water column 46 - overlap bathy bottom - temporally different from a separate lift 71 - unclassified associated with areas of overlap bathy bottom/temporal bathymetric differences 72 - ground associated with areas of overlap bathy bottom/temporal bathymetric differences 81 - water surface associated with areas of overlap bathy bottom/temporal bathymetric differences 85 - water column associated with areas of overlap bathy bottom/temporal bathymetric differences 1 Overlap - edge clip 1 Withheld- green sensor returns within topographic areas 42 Synthetic - synthetic water surface These data sets also includes lidar intensity values, number of returns, return number, time, and scan angle. The 100 meter buffered NOAA Chesapeake Bay MD1902 project area covers approximately 260.195 square kilometers in an area encompassing Severn River to Rhode River near Annapolis, Maryland. LAS files were compiled in 500 m x 500 m tiles. The final classified lidar data were then transformed from ellipsoid to geoidal height (Geoid12b) and used to create 23 - 5,000 m x 5,000 m topobathymetric DEMs in GeoTIFF format with 1m pixel resolution. The 100 meter buffered NOAA Chesapeake Bay MD1903 project area covers approximately 273.518 square kilometers in an area encompassing West River to Dares Beach near Annapolis, Maryland. LAS files were compiled in 500 m x 500 m tiles. The final classified lidar data were then transformed from ellipsoid to geoidal height (Geoid12b) and used to create 18 - 5,000m x 5,000 m topobathymetric DEMs in GeoTIFF format with 1m pixel resolution.

These data were collected by Dewberry using a CZMIL Super Nova system. The data were acquired from 20220224 through 20220601. The data include topobathy data in LAS 1.4 format classified as unclassified (1); ground (2); low noise (7); high noise (18); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45); submerged aquatic vegetation (64); and temporal bathymetric bottom (65) in accordance with project specifications. The project consists of approximately 615 square miles of data along the shores of Indian River Lagoon and contains 136 5000 m x 5000 m DEM tiles.

The NOAA Chesapeake Bay MD1804 Option 1 West 4 Topobathymetric lidar data were collected by NV5 Geospatial, Inc. (NV5) using a Riegl VQ-880-GH system. The Chesapeake Bay MD1804 Option 1 West 4 acquisition spanned from 20190312-20190419 in 9 missions. The Chesapeake Bay MD1804 Option 1 West 4 dataset includes Topobathymetric data in LAS format 1.4, point data record format 6, with the following classifications in accordance with project specifications and the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards: 1 - unclassified 2 - ground 7 - noise 40 - bathymetric bottom or submerged topography 43 - submerged object 45 - water column 1 Overlap - edge clip This data set also includes lidar intensity values, number of returns, return number, time, and scan angle. The 100 meter buffered NOAA Chesapeake Bay MD1804 Option 1 West 4 project area covers approximately 492.737 square kilometers of an area encompassing a portion of the Chesapeake Bay and the nearby census designated places of Solomons, California, Hollywood, Lusby, Broomes Island, and St Leonard, Maryland. LAS files were compiled in 500 m x 500 m tiles. The NOAA Chesapeake Bay MD1804 Option 1 West 4 dataset is comprised of 2,593 - 500 m x 500 m LAS tiles.

These data were collected by Leading Edge Geomatics using a Riegl VQ-880-G II sensor. The data acqusition began January 20, 2019 through June 2, 2019. The data includes topobathy data in LAS 1.4 format classified as created, never classified (0); unclassified (1); ground (2); noise (7); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); International Hydrographic Organization S-57 object, not otherwise specified (44); no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45); bathymetic bottom temporal changes (46) in accordance with project specifications.