A study comparing reintroduction scenarios for the San Francisco gartersnake (Thamnophis sirtalis tetrataenia), an endangered subspecies native to San Mateo County and Santa Cruz County in northern California. Models for snake survival, growth, fecundity, and reproductive status were used to construct a demographic population model. Data are posterior distributions for demographic parameters from Markov Chain Monte Carlo sampling in hierarchical Bayesian models.

This dataset includes records of captures of San Francisco gartersnakes (Thamnophis sirtalis tetrataenia) collected at five sites from 2007 to 2020. The data include measurements of snake snout-vent length to estimate growth patterns, snake sex, and the record of all captures of individual snakes for estimating capture probability, availability for capture, and survival.

Conversion and fragmentation of wildlife habitat often leads to smaller and isolated populations and can reduce a species’ ability to disperse across the landscape. As a consequence, genetic drift can quickly lower genetic variation and increase vulnerability to extirpation. For species of conservation concern, quantification of population size and connectivity can clarify the influence of genetic drift in local populations and provides important information for conservation management and recovery strategies. Here, we used genome-wide single nucleotide polymorphism (SNP) data and capture-mark-recapture methods to evaluate the population structure, genetic diversity and abundance of seven focal sites of the endangered San Francisco gartersnake (Thamnophis sirtalis tetrataenia), a species affected by alteration and isolation of wetland habitats throughout its distribution. We also used temporally sampled datasets to examine the magnitude of genetic change over time.

Conversion and fragmentation of wildlife habitat often leads to smaller and isolated populations and can reduce a species’ ability to disperse across the landscape. As a consequence, genetic drift can quickly lower genetic variation and increase vulnerability to extirpation. For species of conservation concern, quantification of population size and connectivity can clarify the influence of genetic drift in local populations and provides important information for conservation management and recovery strategies. Here, we used genome-wide single nucleotide polymorphism (SNP) data and capture-mark-recapture methods to evaluate the population structure, genetic diversity and abundance of seven focal sites of the endangered San Francisco gartersnake (Thamnophis sirtalis tetrataenia), a species affected by alteration and isolation of wetland habitats throughout its distribution. We also used temporally sampled datasets to examine the magnitude of genetic change over time.

These data support the following publication: Rose, J.P., Ersan, J.S., Wylie, G.D., Casazza, M.L. and Halstead, B.J., 2019. Demographic factors affecting population growth in giant gartersnakes. The Journal of Wildlife Management, 83(7), pp.1540-1551.

These data support the following publication: Rose, J.P., Ersan, J.S., Wylie, G.D., Casazza, M.L. and Halstead, B.J., 2019. Demographic factors affecting population growth in giant gartersnakes. The Journal of Wildlife Management, 83(7), pp.1540-1551.

This dataset includes data on the growth, fecundity, and survival of Giant Gartersnakes (Thamnophis gigas) in the Sacramento Valley of California from 1995-2017. In addition, the dataset includes R code to replicate the Integral Projection Model construction and analysis presented in the paper Demographic drivers of population growth in a threatened snake by Rose et al. published in Journal of Wildlife Management in 2019.

This dataset includes data on the growth, fecundity, and survival of Giant Gartersnakes (Thamnophis gigas) in the Sacramento Valley of California from 1995-2017. In addition, the dataset includes R code to replicate the Integral Projection Model construction and analysis presented in the paper Demographic drivers of population growth in a threatened snake by Rose et al. published in Journal of Wildlife Management in 2019.

The datasets used in the creation of the predicted Habitat Suitability models includes the CWHR range maps of Californias regularly-occurring vertebrates which were digitized as GIS layers to support the predictions of the CWHR System software. These vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.The models also used the CALFIRE-FRAP compiled "best available" land cover data known as Fveg. This compilation dataset was created as a single data layer, to support the various analyses required for the Forest and Rangeland Assessment, a legislatively mandated function. These data are being updated to support on-going analyses and to prepare for the next FRAP assessment in 2015. An accurate depiction of the spatial distribution of habitat types within California is required for a variety of legislatively-mandated government functions. The California Department of Forestry and Fire Protections CALFIRE Fire and Resource Assessment Program (FRAP), in cooperation with California Department of Fish and Wildlife VegCamp program and extensive use of USDA Forest Service Region 5 Remote Sensing Laboratory (RSL) data, has compiled the "best available" land cover data available for California into a single comprehensive statewide data set. The data span a period from approximately 1990 to 2014. Typically the most current, detailed and consistent data were collected for various regions of the state. Decision rules were developed that controlled which layers were given priority in areas of overlap. Cross-walks were used to compile the various sources into the common classification scheme, the California Wildlife Habitat Relationships (CWHR) system.CWHR range data was used together with the FVEG vegetation maps and CWHR habitat suitability ranks to create Predicted Habitat Suitability maps for species. The Predicted Habitat Suitability maps show the mean habitat suitability score for the species, as defined in CWHR. CWHR defines habitat suitability as NO SUITABILITY (0), LOW (0.33), MEDIUM (0.66), or HIGH (1) for reproduction, cover, and feeding for each species in each habitat stage (habitat type, size, and density combination). The mean is the average of the reproduction, cover, and feeding scores, and can be interpreted as LOW (less than 0.34), MEDIUM (0.34-0.66), and HIGH (greater than 0.66) suitability. Note that habitat suitability ranks were developed based on habitat patch sizes >40 acres in size, and are best interpreted for habitat patches >200 acres in size. The CWHR Predicted Habitat Suitability rasters are named according to the 4 digit alpha-numeric species CWHR ID code. The CWHR Species Lookup Table contains a record for each species including its CWHR ID, scientific name, common name, and range map revision history (available for download at https://www.wildlife.ca.gov/Data/CWHR).

The datasets used in the creation of the predicted Habitat Suitability models includes the CWHR range maps of Californias regularly-occurring vertebrates which were digitized as GIS layers to support the predictions of the CWHR System software. These vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.The models also used the CALFIRE-FRAP compiled "best available" land cover data known as Fveg. This compilation dataset was created as a single data layer, to support the various analyses required for the Forest and Rangeland Assessment, a legislatively mandated function. These data are being updated to support on-going analyses and to prepare for the next FRAP assessment in 2015. An accurate depiction of the spatial distribution of habitat types within California is required for a variety of legislatively-mandated government functions. The California Department of Forestry and Fire Protections CALFIRE Fire and Resource Assessment Program (FRAP), in cooperation with California Department of Fish and Wildlife VegCamp program and extensive use of USDA Forest Service Region 5 Remote Sensing Laboratory (RSL) data, has compiled the "best available" land cover data available for California into a single comprehensive statewide data set. The data span a period from approximately 1990 to 2014. Typically the most current, detailed and consistent data were collected for various regions of the state. Decision rules were developed that controlled which layers were given priority in areas of overlap. Cross-walks were used to compile the various sources into the common classification scheme, the California Wildlife Habitat Relationships (CWHR) system.CWHR range data was used together with the FVEG vegetation maps and CWHR habitat suitability ranks to create Predicted Habitat Suitability maps for species. The Predicted Habitat Suitability maps show the mean habitat suitability score for the species, as defined in CWHR. CWHR defines habitat suitability as NO SUITABILITY (0), LOW (0.33), MEDIUM (0.66), or HIGH (1) for reproduction, cover, and feeding for each species in each habitat stage (habitat type, size, and density combination). The mean is the average of the reproduction, cover, and feeding scores, and can be interpreted as LOW (less than 0.34), MEDIUM (0.34-0.66), and HIGH (greater than 0.66) suitability. Note that habitat suitability ranks were developed based on habitat patch sizes >40 acres in size, and are best interpreted for habitat patches >200 acres in size. The CWHR Predicted Habitat Suitability rasters are named according to the 4 digit alpha-numeric species CWHR ID code. The CWHR Species Lookup Table contains a record for each species including its CWHR ID, scientific name, common name, and range map revision history (available for download at https://www.wildlife.ca.gov/Data/CWHR).