The water depth and temperature data was collected in NE Pacific (limit-180) from ship SEA-LAND PACIFIC. The data was collected from September 19, 1990 to October 21, 1990. The originator's bathythermograph (XBT) data was collected as part of Shipboard Environmental data Acquisition System (SEAS) III program and was submitted in a 3.5 inch diskette by Mr. Paul Stevens of U.S. Navy, Fleet Numerical Oceanography Center, Monterey, CA. The data has been converted and is now available on line in C116 file format of NODC.

The water depth and temperature data was collected from ship Imperial Skeena. The data was collected from NE Pacific (limit-180) from October 30, 1985 to April 13, 1990. The originator's bathythermograph (XBT) data was submitted in three cassettes with 49 observations by Robert Decker to National Ocean Service (NOS), Rockville. The data has been converted and is now available on line in C116 file format of NODC.

The data in this accession were collected in NE Pacific (limit-180) from ship J. JONES between October 10, 1991 and June 28, 1992. The real time data of water temperature at varying depth bathythermograph (XBT) was recorded in stripcharts by the US Navy. Radio logs are forms that contain time, weather latitude/longitude, vessel id, ship id, etc. These are radioed every two hours to some military center. One line per strip chart. Some strip charts have time /date /ship id /latitude /longitude annotated on the strip chart. Thirty nine stripcharts and radio logs were submitted to NODC. The XBT data from these stripcharts have been digitized and are present in the current NODC data storage system in C116 file format.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

The data in this accession was collected in NE Pacific (limit-180) from US Coast Guard Cutter Sherman between September 14, 1990 and October 22, 1990. The real time data of water temperature at varying depth bathythermograph (XBT) was recorded in stripcharts by the US Coast Guard. Nineteen stripcharts and radio logs were submitted to NODC. The XBT data from these stripcharts have been digitized and is present in the current NODC data storage system in C116 file format.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

The data in this accession were collected in NE Pacific (limit-180) from USNS Bartlett between November 11, 1973 and December 16, 1973. The real time data of water temperature at varying depth bathythermograph (XBT) was recorded in stripcharts by the US Navy. Radio logs are forms that contain time, weather latitude/longitude, vessel id, ship id, etc. These are radioed every two hours to some military center. One line per strip chart. Some strip charts have time /date /ship id /latitude /longitude annotated on the strip chart. 138 stripcharts and radio logs were submitted to NODC by Naval Oceanographic Office, Stennis Space Center, MS.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.