Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from CAPITAN CANEPA and other platforms in a world-wide distribution from March 21, 1921 to December 29, 1962. Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and the NODC standard Bathythermograph (MBT) (C128) formats. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity- temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C128 format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from PARRAMATTA and other platforms in a world-wide distribution from October 4, 1903 to December 19, 1963. Data were submitted by Australia Navy as part of the California Cooperative Fisheries Investigation (CALCOFI) project. Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and the Universal Bathythermograph Output (UBT) formats. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. Data has been processed by NODC to the NODC standard Bathythermograph (MBT) (C128) format. The C128 format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from A. AGASSIZ and other platforms in the Pacific ocean from July 25, 1954 to December 19, 1966. Data were submitted by Scripps Institution of Oceanography as part of the California Cooperative Fisheries Investigation (CALCOFI) project. Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and the Universal Bathythermograph Output (UBT) formats. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity- temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from HMAS DERWENT and other platforms in a world-wide distribution from August 3, 1904 to December 31, 1964. Data were submitted by Australia Navy as part of the California Cooperative Fisheries Investigation (CALCOFI) project. Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and the Universal Bathythermograph Output (UBT) formats. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity- temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. Data has been processed by NODC to the NODC standard Bathythermograph (MBT) (C128) format. The C128 format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Temperature profile and nutrients data were collected using bottle and CTD casts in the North Atlantic Ocean from the GARCIA DEL CID. Data were collected from 10 June 1997 to 18 June 1997. The data were submitted by Dr. Hernan Garcia with support from the Tinto and Odiel River Ocean Study (TOROS) project.

Oceanographic Station Data, temperature, and other data were collected using CTD and bottle casts from PARRAMATTA and other platforms in a world-wide distribution from October 4, 1903 to December 19, 1963. Data were submitted by Australia Navy. Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and the NODC standard Bathythermograph (MBT) (C128) format. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The C128 format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Temperature profile and other data were collected using CTD casts from NOAA Ship MALCOLM BALDRIGE and NOAA Ship DISCOVERER in the North/South Pacific Ocean from 23 February 1990 to 06 December 1990. Data were collected by the Pacific Marine Environmental Laboratory (PMEL) with support from Equatorial Pacific Ocean Climate Studies (EPOCS) and Climate and Global Change (CGS) project. Data were processed by NODC to the NODC standard High-Resolution STD/CTD Data (F022) format. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Temperature profile and other data were collected using CTD casts from NOAA Ship RESEARCHER, NOAA Ship MALCOLM BALDRIGE, and NOAA Ship OCEANOGRAPHER in the TOGA area of Pacific Ocean from 25 April 1987 to 03 December 1988. Data were collected by the Pacific Marine Environmental Laboratory (PMEL) with support from the Equatorial Pacific Ocean Climate Studies (EPOCS). Data were processed by NODC to the NODC standard High-Resolution STD/CTD Data (F022) format. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Temperature profile and other data were collected using CTD casts in the Northeast Pacific Ocean and Coastal Waters of California from June 15, 2000 to January 17, 2001. Data were submitted by Pacific Marine Environmental Laboratory (PMEL) as part of the Fisheries-Oceanography Coordinated Investigations (FOCI) project.

Chemical and temperature profile data were collected using bottle and CTD casts from the THOMAS THOMPSON in the Pacific Ocean from March 19, 1992 to October 21, 1992. Data were collected three different universities and a institution; Oregon State University, University of Washington, Woods Hole Oceanographic Institution, and University of Maryland; Horn Point Environmental Laboratory as part of the Joint Global Ocean Flux Study/Equatorial Pacific Basin Study (JGOFS/EQPAC) project.