These data-sets are polygon shapefiles that represent flood inundation boundaries for 157 flooding scenarios in an 8-mile reach of the Papillion Creek near Offutt Air Force Base. These shapefiles were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Air Force, Offutt Air Force Base for use within the USGS Flood Inundation Mapping program. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages on the Papillion Creek at Fort Crook, Nebr. (station 06610795) and Papillion Creek at Harlan Lewis Road near La Platte, Nebr. (station 06610798). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System web interface at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https:/water.weather.gov/ahps/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the current (2021) stage-discharge relation at the Papillion Creek at Fort Crook, Nebr. streamgage. The hydraulic model then was used to compute 157 water-surface profiles for scenarios where combination of stage values in 1-foot (ft) stage intervals, that ranged between 27 and 39 ft at the Papillion Creek at Fort Crook streamgage and 13.9 and 30.9 ft at the Papillion Creek at Harlan Lewis Road streamgage as referenced to the local datum. The simulated water-surface profiles then were combined with a geographic information system digital elevation model (DEM) with a 3.281-ft grid to delineate polygon shapefiles, and depth grids of inundated areas. Along with the inundated area maps, polygon shapefiles and depth grids of areas behind the levees were created to display the uncertainty of these areas, if a levee breech were to occur. These 'areas of uncertainty' files have '_breach' and '_breachgrid' appended to the file names in the data release. The availability of these maps, along with information regarding current stage from the USGS streamgage, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Digital flood-inundation maps for an 8-mile reach of the Papillion Creek near Offutt Air Force Base, were created by the U.S. Geological Survey (USGS) in cooperation with the U.S. Air Force, Offutt Air Force Base. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages on the Papillion Creek at Fort Crook, Nebr. (station 06610795) and Papillion Creek at Harlan Lewis Road near La Platte, Nebr. (station 06610798). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System web interface at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https:/water.weather.gov/ahps/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the current (2021) stage-discharge relation at the Papillion Creek at Fort Crook, Nebr, streamgage. The hydraulic model then was used to compute 157 water-surface profiles for scenarios where combination of stage values in 1-foot (ft) stage intervals, that ranged between 27 and 39 ft at the Papillion Creek at Fort Crook streamgage and 13.9 and 30.9 ft at the Papillion Creek at Harlan Lewis Road streamgage as referenced to the local datum. The simulated water-surface profiles then were combined with a geographic information system (GIS) digital elevation model (DEM) with a 3.281-ft grid to delineate polygon shapefiles, and depth grids of inundated areas. Along with the inundated area maps, polygon shapefiles and depth grids of areas behind the levees were created to display the uncertainty of these areas, if a levee breech were to occur. These 'areas of uncertainty' files have '_breach' and '_breachgrid' appended to the file names in the data release. The availability of these maps, along with information regarding current stage from the USGS streamgage, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

These datasets are raster files that represent water depths associated with each flood inundation boundary for two digital flood-inundation map libraries for 14.8 miles of the Little and Big Papillion Creeks in Omaha, Nebraska. These raster files were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District for use within the USGS Flood Inundation Mapping program. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages Little Papillion Creek at Irvington, Nebr. (station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (station 06610770). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/. Flood profiles were computed using hydraulic models for two different stream reaches that comprised 14.8 miles of stream length of the Little and Big Papillion Creeks in Omaha. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot (ft) stage intervals at selected stage ranges to represent various flooding scenarios at the streamgages in the reach. The simulated water-surface profiles then were combined using a geographic information system with a digital elevation model, which had a 10-ft grid to delineate the area flooded and water depths at each stage. Along with the inundated area maps, polygon shapefiles of areas behind the levees were created to display the uncertainty of these areas if a levee breach were to occur. These 'areas of uncertainty' files have '_breach' appended to the file names in the data release. The availability of these maps, along with information regarding current stage from USGS streamgages, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

These data-sets are polygon shapefiles that represent flood inundation boundaries for two digital flood-inundation map libraries for 14.8 miles of the Little and Big Papillion Creeks in Omaha, Nebraska. These shapefiles were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District for use within the USGS Flood Inundation Mapping program. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages Little Papillion Creek at Irvington, Nebr. (station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (station 06610770). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/. Flood profiles were computed using hydraulic models for two different stream reaches that comprised 14.8 miles of stream length of the Little and Big Papillion Creeks in Omaha. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot (ft) stage intervals at selected stage ranges to represent various flooding scenarios at the streamgages in the reach. The simulated water-surface profiles then were combined using a geographic information system with a digital elevation model, which had a 10-ft grid to delineate the area flooded and water depths at each stage. Along with the inundated area maps, polygon shapefiles of areas behind the levees were created to display the uncertainty of these areas if a levee breach were to occur. These 'areas of uncertainty' files have '_breach' appended to the file names in the data release. The availability of these maps, along with information regarding current stage from USGS streamgages, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Digital flood-inundation map libraries for two reaches that comprise 14.8 miles of the Little and Big Papillion Creeks in Omaha, Nebraska were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages Little Papillion Creek at Irvington, Nebr. (station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (station 06610770). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/. Flood profiles were computed using hydraulic models for two different stream reaches that comprised 14.8 miles of stream length of the Little and Big Papillion Creeks in Omaha. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot (ft) stage intervals at selected stage ranges to represent various flooding scenarios at the streamgages in the reach. The simulated water-surface profiles then were combined using a geographic information system with a digital elevation model, which had a 10-ft grid to delineate the area flooded and water depths at each stage. Along with the inundated area maps, polygon shapefiles of areas behind the levees were created to display the uncertainty of these areas if a levee breach were to occur. These 'areas of uncertainty' files have '_breach' appended to the file names in the data release. The availability of these maps, along with information regarding current stage from USGS streamgages, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Digital grids that represent the depth of flood waters for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service (site SBRN1) at https://water.weather.gov/ahps/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current (2018) stage-discharge relation at the Platte River at Scottsbluff, Nebr., streamgage. The hydraulic model was then used to compute 10 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft, or near bankfull, to 18 ft, which exceeds the stage that corresponds to the estimated 1-percent annual exceedance probability flood (100-year recurrence interval flood). The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model derived from light detection and ranging data having a 0.6-ft root mean square error and 2-ft horizontal resolution resampled to a 6-ft grid to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.

Digital grids that represent the depth of flood waters for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service (site SBRN1) at https://water.weather.gov/ahps/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current (2018) stage-discharge relation at the Platte River at Scottsbluff, Nebr., streamgage. The hydraulic model was then used to compute 10 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft, or near bankfull, to 18 ft, which exceeds the stage that corresponds to the estimated 1-percent annual exceedance probability flood (100-year recurrence interval flood). The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model derived from light detection and ranging data having a 0.6-ft root mean square error and 2-ft horizontal resolution resampled to a 6-ft grid to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.

Digital flood-inundation maps for a 6.6-mile reach of the St. Joseph River at Elkhart, Indiana were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/, which also forecasts flood hydrographs at this site (NWS site EKMI3). Flood profiles were computed for the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind., reach by means of a one-dimensional step-backwater hydraulic modeling software developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated using the current stage-discharge rating at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. The hydraulic model was then used to compute 6 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum ranging from 23.0 ft (the NWS “action stage”) to 28.0 ft, which is the highest stage interval of the current USGS stage-discharge rating curve and 1 ft higher than the NWS “major flood stage.” The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar]) data having a 0.49-ft root mean squared error and 4.9-ft horizontal resolution) to delineate the area flooded at each stage. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Digital flood-inundation maps for a 6.6-mile reach of the St. Joseph River at Elkhart, Indiana were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/, which also forecasts flood hydrographs at this site (NWS site EKMI3). Flood profiles were computed for the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind., reach by means of a one-dimensional step-backwater hydraulic modeling software developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated using the current stage-discharge rating at the USGS streamgage 04101000, St. Joseph River at Elkhart, Ind. The hydraulic model was then used to compute 6 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum ranging from 23.0 ft (the NWS “action stage”) to 28.0 ft, which is the highest stage interval of the current USGS stage-discharge rating curve and 1 ft higher than the NWS “major flood stage.” The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar]) data having a 0.49-ft root mean squared error and 4.9-ft horizontal resolution) to delineate the area flooded at each stage. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Digital flood-inundation maps for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service (site SBRN1) at https://water.weather.gov/ahps2/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current (2018) stage-discharge relation at the Platte River at Scottsbluff, Nebr., streamgage. The hydraulic model was then used to compute 10 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft, or near bankfull, to 18 ft, which exceeds the stage that corresponds to the estimated 1-percent annual exceedance probability flood (100-year recurrence interval flood). The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model derived from light detection and ranging data having a 0.6-ft root mean square error and 2-ft horizontal resolution resampled to a 6-ft grid to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.