This data layer provides access to Base Realignment and Closure (BRAC) Superfund Sites as part of the CIMC web service. EPA works with DoD to facilitate the reuse and redevelopment of BRAC federal properties. When the BRAC program began in the early 1990s, EPA worked with DoD and the states to identify uncontaminated areas and these parcels were immediately made available for reuse. Since then EPA has worked with DoD to clean up the contaminated portions of bases. These are usually parcels that were training ranges, landfills, maintenance facilities and other past waste-disposal areas. Superfund is a program administered by the EPA to locate, investigate, and clean up the worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. This data layer shows Superfund Sites that are located at BRAC Federal Facilities. Additional Superfund sites and other BRAC sites (those that are not Superfund sites) are included in other data layers as part of this web service. BRAC Superfund Sites shown in this web service are derived from the epa.gov website and include links to the relevant web pages within the attribute table. Data about BRAC Superfund Sites are located on their own EPA web pages, and CIMC links to those pages. The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

This data layer provides access to Resource Conservation and Recovery Act (RCRA) Base Realignment and Closure (BRAC) sites as part of the CIMC web service. The Resource Conservation and Recovery Act, among other things, helps ensure that wastes are managed in an environmentally sound manner so as to protect human health and the environment from the potential hazards of waste disposal. In particular RCRA tightly regulates all hazardous waste from "cradle to grave." In general, all generators, transporters, treaters, storers, and disposers of hazardous waste are required to provide information about their activities to state environmental agencies. These agencies, in turn pass on the information to regional and national EPA offices. Accidents or other activities at facilities that treat, store or dispose of hazardous wastes have sometimes led to the release of hazardous waste or hazardous constituents into soil, ground water, surface water, or air. When that happens, the RCRA Corrective Action program is one program that may be used to accomplish the necessary cleanup. This data layer shows those RCRA sites that are located at BRAC Federal Facilities. Additional RCRA sites and other BRAC sites (those that are not RCRA sites) are included in other data layers as part of this web service. Note: RCRA facilities which are not undergoing corrective action are not considered “Cleanups” in Cleanups in My Community. The complete set of RCRA facilities can be accessed via the EPA RCRA database in Envirofacts (https://www.epa.gov/enviro/rcrainfo-overview). The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

This data layer provides access to Resource Conservation and Recovery Act (RCRA) Base Realignment and Closure (BRAC) sites as part of the CIMC web service. The Resource Conservation and Recovery Act, among other things, helps ensure that wastes are managed in an environmentally sound manner so as to protect human health and the environment from the potential hazards of waste disposal. In particular RCRA tightly regulates all hazardous waste from "cradle to grave." In general, all generators, transporters, treaters, storers, and disposers of hazardous waste are required to provide information about their activities to state environmental agencies. These agencies, in turn pass on the information to regional and national EPA offices. Accidents or other activities at facilities that treat, store or dispose of hazardous wastes have sometimes led to the release of hazardous waste or hazardous constituents into soil, ground water, surface water, or air. When that happens, the RCRA Corrective Action program is one program that may be used to accomplish the necessary cleanup. This data layer shows those RCRA sites that are located at BRAC Federal Facilities. Additional RCRA sites and other BRAC sites (those that are not RCRA sites) are included in other data layers as part of this web service. Note: RCRA facilities which are not undergoing corrective action are not considered “Cleanups” in Cleanups in My Community. The complete set of RCRA facilities can be accessed via the EPA RCRA database in Envirofacts (https://www.epa.gov/enviro/rcrainfo-overview). The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Superfund sites as part of the CIMC web service. Data are collected using the Superfund Enterprise Management System (SEMS) and transferred to the Facility Registry Service (FRS) for access by the public. Data about Federal facility Superfund sites are located on their own EPA web pages, and CIMC links to those pages. Links to the relevant web pages for each site are provided within the attribute table. Federal facility sites can be either Superfund sites or RCRA Corrective Action sites, or they may have moved from one program to the other and back. In Cleanups in My Community, you can map or list any of these Federal Facility sites. This data layer shows only those facilities that are Superfund Sites. RCRA federal facility sites and other Superfund NPL sites are included in other data layers as part of this web service. Superfund is a program administered by the EPA to locate, investigate, and clean up worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. The CIMC web service was initially published in 2013, but the data are updated twice each month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Superfund sites as part of the CIMC web service. Data are collected using the Superfund Enterprise Management System (SEMS) and transferred to the Facility Registry Service (FRS) for access by the public. Data about Federal facility Superfund sites are located on their own EPA web pages, and CIMC links to those pages. Links to the relevant web pages for each site are provided within the attribute table. Federal facility sites can be either Superfund sites or RCRA Corrective Action sites, or they may have moved from one program to the other and back. In Cleanups in My Community, you can map or list any of these Federal Facility sites. This data layer shows only those facilities that are Superfund Sites. RCRA federal facility sites and other Superfund NPL sites are included in other data layers as part of this web service. Superfund is a program administered by the EPA to locate, investigate, and clean up worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. The CIMC web service was initially published in 2013, but the data are updated twice each month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

This data layer provides access to Superfund National Priority List Sites as part of the CIMC web service. Superfund is a program administered by the EPA to locate, investigate, and clean up worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. Only NPL sites have been included in Cleanups in My Community thus far. EPA maintains the NPL, which identifies for the States and the public those sites or other releases that appear to warrant remedial (long term) actions. These NPL sites fall into the following categories: Proposed: Sites may be proposed for the NPL and then may be placed on the NPL as final or be removed from the Proposed NPL. Final: Those sites placed on the NPL are called "final," and for these sites, a cleanup remedy is selected and implemented. However, it may be several years after construction of the remedy is completed before the hazardous substances are completely cleaned up or controlled in place. Deleted: After the clean up process is complete, and appropriate reviews confirm the area is cleaned up or the hazards are controlled, sites can be deleted from the NPL. For more information on the data provided through this web service, please see the processing steps below, and see more information here: https://www.epa.gov/cleanups/cimc-about-data#superfund. The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

This data layer provides access to Superfund National Priority List Sites as part of the CIMC web service. Superfund is a program administered by the EPA to locate, investigate, and clean up worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. Only NPL sites have been included in Cleanups in My Community thus far. EPA maintains the NPL, which identifies for the States and the public those sites or other releases that appear to warrant remedial (long term) actions. These NPL sites fall into the following categories: Proposed: Sites may be proposed for the NPL and then may be placed on the NPL as final or be removed from the Proposed NPL. Final: Those sites placed on the NPL are called "final," and for these sites, a cleanup remedy is selected and implemented. However, it may be several years after construction of the remedy is completed before the hazardous substances are completely cleaned up or controlled in place. Deleted: After the clean up process is complete, and appropriate reviews confirm the area is cleaned up or the hazards are controlled, sites can be deleted from the NPL. For more information on the data provided through this web service, please see the processing steps below, and see more information here: https://www.epa.gov/cleanups/cimc-about-data#superfund. The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Resource Conservation and Recovery Act (RCRA) sites as part of the CIMC web service. The Resource Conservation and Recovery Act, among other things, helps ensure that wastes are managed in an environmentally sound manner so as to protect human health and the environment from the potential hazards of waste disposal. In particular, RCRA tightly regulates all hazardous waste from "cradle to grave." In general, all generators, transporters, treaters, storers, and disposers of hazardous waste are required to provide information about their activities to state environmental agencies. These agencies, in turn pass on the information to regional and national EPA offices. Accidents or other activities at facilities that treat, store or dispose of hazardous wastes have sometimes led to the release of hazardous waste or hazardous constituents into soil, ground water, surface water, or air. When that happens, the RCRA Corrective Action program is one program that may be used to accomplish the necessary cleanup. In Cleanups in My Community, you can map or list RCRA Corrective Action sites that are currently undergoing corrective action, sites for which a remedy has been selected, sites for which construction has been completed, and sites where the corrective action cleanup is complete. This data layer shows those RCRA sites that are located at Federal Facilities. Note: RCRA facilities which are not undergoing corrective action are not considered “Cleanups” in Cleanups in My Community. The complete set of RCRA facilities can be accessed via the EPA RCRA database in Envirofacts (https://enviro.epa.gov/facts/rcrainfo/search.html). The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Resource Conservation and Recovery Act (RCRA) sites as part of the CIMC web service. The Resource Conservation and Recovery Act, among other things, helps ensure that wastes are managed in an environmentally sound manner so as to protect human health and the environment from the potential hazards of waste disposal. In particular, RCRA tightly regulates all hazardous waste from "cradle to grave." In general, all generators, transporters, treaters, storers, and disposers of hazardous waste are required to provide information about their activities to state environmental agencies. These agencies, in turn pass on the information to regional and national EPA offices. Accidents or other activities at facilities that treat, store or dispose of hazardous wastes have sometimes led to the release of hazardous waste or hazardous constituents into soil, ground water, surface water, or air. When that happens, the RCRA Corrective Action program is one program that may be used to accomplish the necessary cleanup. In Cleanups in My Community, you can map or list RCRA Corrective Action sites that are currently undergoing corrective action, sites for which a remedy has been selected, sites for which construction has been completed, and sites where the corrective action cleanup is complete. This data layer shows those RCRA sites that are located at Federal Facilities. Note: RCRA facilities which are not undergoing corrective action are not considered “Cleanups” in Cleanups in My Community. The complete set of RCRA facilities can be accessed via the EPA RCRA database in Envirofacts (https://enviro.epa.gov/facts/rcrainfo/search.html). The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.

This data layer provides access to Removal/Response sites as part of the CIMC web service. Removals are hazardous substance releases that require immediate or short-term response actions. These are generally addressed under the Emergency Response program and are initially tracked centrally by the federal government's National Reporting Center. Cleanups in My Community maps and lists removals that are included in EPA’s epaosc.org site, and provides direct links to information on these sites. CIMC obtains updated removal data through a web service from epaosc.org twice a month. The CIMC web service was initially published in 2013, but the data are updated twice a month. The full schedule for data updates in CIMC is located here: https://ofmpub.epa.gov/frs_public2/frs_html_public_pages.frs_refresh_stats.