This package contains data in a portion of northern Nevada, the extent of the ‘Nevada Machine Learning Project’ (DE-EE0008762). Slip tendency (TS) and dilation tendency (TD) were calculated for the all the faults in the Nevada ML study area. TS is the ratio between the shear components of the stress tensor and the normal components of the stress tensor acting on a fault plane. TD is the ratio of all the components of the stress tensor that are normal to a fault plane. Faults with higher TD are relatively more likely to dilate and host open, conductive fractures. Faults with higher TS are relatively more likely to slip, and these fractures may be propped open and conductive. These values of TS and TD were used to update a map surface from the Nevada Geothermal Machine Learning Project (DE-FOA-0001956) that used less reliable estimates for TS and TD. The new map surface was generated using the same procedure as the old surface, just with the new TS and TD data values.

This package contains USGS data contributions to the DOE-funded Nevada Geothermal Machine Learning Project (DE-FOA-0001956), with the objective of developing a machine learning approach to identifying new geothermal systems in the Great Basin. This package contains three major data products (geophysics, heat flow, and fault dilation and slip tendencies) that cover a large portion of northern Nevada. The geophysics data include map surfaces related to gravity and magnetic data, and line and point data derived from those surfaces. Heat flow data include an interpolated map of heat flow in mW/m², an error surface, and well data used to construct them. The dilation and slip tendency information exist as attributes assigned to each line segment of mapped faults and geophysical lineaments.

This package contains USGS data contributions to the DOE-funded Nevada Geothermal Machine Learning Project (DE-FOA-0001956), with the objective of developing a machine learning approach to identifying new geothermal systems in the Great Basin. This package contains three major data products (geophysics, heat flow, and fault dilation and slip tendencies) that cover a large portion of northern Nevada. The geophysics data include map surfaces related to gravity and magnetic data, and line and point data derived from those surfaces. Heat flow data include an interpolated map of heat flow in mW/m², an error surface, and well data used to construct them. The dilation and slip tendency information exist as attributes assigned to each line segment of mapped faults and geophysical lineaments.

This package contains USGS data contributions to the DOE-funded Nevada Geothermal Machine Learning Project (DE-FOA-0001956), with the objective of developing a machine learning approach to identifying new geothermal systems in the Great Basin. This package contains three major data products (geophysics, heat flow, and fault dilation and slip tendencies) that cover a large portion of northern Nevada. The geophysics data include map surfaces related to gravity and magnetic data, and line and point data derived from those surfaces. Heat flow data include an interpolated map of heat flow in mW/m², an error surface, and well data used to construct them. The dilation and slip tendency information exist as attributes assigned to each line segment of mapped faults and geophysical lineaments.

This package contains gravity and magnetics data and products generated for the Nevada Machine Learning (NVML) project (DE-FOA-0001956). Data products contained in this release consist of grids and vector data. Grids include: primary anomaly maps (isostatic and PSG), match-filtered maps, horizontal gradient (HG) maps, confidence maps, and maps showing density of specific key structural features. The vector data in this release include the gravity stations, HGM of gravity and magnetics, ‘generalized’ lineations for gravity and magnetics, gravity and magnetic lineation terminations and intersections, and ‘well-constrained’ HGM saddles.

This package contains USGS data contributions to the DOE-funded Nevada Geothermal Machine Learning Project, with the objective of developing a machine learning approach to identifying new geothermal systems in the Great Basin. This package contains three major data products (geophysics, heat flow, and fault dilation and slip tendencies) that cover a large portion of northern Nevada. The geophysics data include map surfaces related to gravity and magnetic data, and line and point data derived from those surfaces. Heat flow data include an interpolated map of heat flow in mW/m^2, an error surface, and well data used to construct them. The dilation and slip tendency information exist as attributes assigned to each line segment of mapped faults and geophysical lineaments. GDR submission contains link to official USGS data release. Additional metadata available on source DOI page.

This package contains a map surface that depicts the estimated spatial variation of conductive heat flow (mW/m²) in a portion of northern Nevada, the extent of the ‘Nevada Machine Learning Project’ (DE-EE0008762). It was generated using well locations that had an estimated heat flow value from a measured thermal gradient and thermal conductivity, mainly using data from Southern Methodist University, with some additional USGS data. Well data are included along with and a map surface depicting estimated standard error of the heat flow interpolation.

The submission includes the labeled datasets, as ESRI Grid files (.gri, .grd) used for training and classification results for our machine leaning model: - brady_som_output.gri, brady_som_output.grd, brady_som_output.* - desert_som_output.gri, desert_som_output.grd, desert_som_output.* The data corresponds to two sites: Brady Hot Springs and Desert Peak, both located near Fallon, NV. Input layers include: - Geothermal: Labeled data (0: Non-geothermal; 1: Geothermal) - Minerals: Hydrothermal mineral alterations, as a result of spectral analysis using Chalcedony, Kaolinite, Gypsum, Hematite and Epsomite - Temperature: Land surface temperature (% of times a pixel was classified as "Hot" by K-Means) - Faults: Fault density with a 300mradius - Subsidence: PSInSAR results showing subsidence displacement of more than 5mm - Uplift: PSInSAR results showing subsidence displacement of more than 5mm Also, the results of the classification using Brady and Desert Peak to build 2 Convolutional Neural Networks. These were applied to the training site as well as the other site, the results are in GeoTiff format. - brady_classification: Results of classification of the Brady-trained model - desert_classification: Results of classification of the Desert Peak-trained model - b2d_classification: Results of classification of Desert Peak using the Brady-trained model - d2b_classification: Results of classification of Brady using the Desert Peak-trained model

The submission includes the labeled datasets, as ESRI Grid files (.gri, .grd) used for training and classification results for our machine leaning model: - brady_som_output.gri, brady_som_output.grd, brady_som_output.* - desert_som_output.gri, desert_som_output.grd, desert_som_output.* The data corresponds to two sites: Brady Hot Springs and Desert Peak, both located near Fallon, NV. Input layers include: - Geothermal: Labeled data (0: Non-geothermal; 1: Geothermal) - Minerals: Hydrothermal mineral alterations, as a result of spectral analysis using Chalcedony, Kaolinite, Gypsum, Hematite and Epsomite - Temperature: Land surface temperature (% of times a pixel was classified as "Hot" by K-Means) - Faults: Fault density with a 300mradius - Subsidence: PSInSAR results showing subsidence displacement of more than 5mm - Uplift: PSInSAR results showing subsidence displacement of more than 5mm Also, the results of the classification using Brady and Desert Peak to build 2 Convolutional Neural Networks. These were applied to the training site as well as the other site, the results are in GeoTiff format. - brady_classification: Results of classification of the Brady-trained model - desert_classification: Results of classification of the Desert Peak-trained model - b2d_classification: Results of classification of Desert Peak using the Brady-trained model - d2b_classification: Results of classification of Brady using the Desert Peak-trained model

This submission contains an ESRI map package (.mpk) with an embedded geodatabase for GIS resources used or derived in the Nevada Machine Learning project, meant to accompany the final report. The package includes layer descriptions, layer grouping, and symbology. Layer groups include: new/revised datasets (paleo-geothermal features, geochemistry, geophysics, heat flow, slip and dilation, potential structures, geothermal power plants, positive and negative test sites), machine learning model input grids, machine learning models (Artificial Neural Network (ANN), Extreme Learning Machine (ELM), Bayesian Neural Network (BNN), Principal Component Analysis (PCA/PCAk), Non-negative Matrix Factorization (NMF/NMFk) - supervised and unsupervised), original NV Play Fairway data and models, and NV cultural/reference data. See layer descriptions for additional metadata. Smaller GIS resource packages (by category) can be found in the related datasets section of this submission. A submission linking the full codebase for generating machine learning output models is available through the "Related Datasets" link on this page, and contains results beyond the top picks present in this compilation.