The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Polygon boundary edits were transferred from the paper maps used in the field to the digital shapefiles each week using ArcMap GIS software. Field edits were also transferred to a set of master paper maps that did not go into the field; these will be archived along with the datasheets. The polygons were contained in a field geodatabase structure (.mdb), enabling topography rules and relationships to be established. The geodatabase was archived each week to ensure no loss of data and to allow for reversion or retrieval if needed. Strict nomenclature was enforced for polygons, and a unique name was assigned to each polygon. The names reflected the verified physiognomic formation type by a prefix of representative letters (W = Woodland, SS = shrub savanna, etc.) followed by a number. In the final map, there are 16 vegetation alliances or associations attributed to 74 polygons (Figure 2-3). For each, there is a oneto- one correlation between the alliance or association and map units (polygons). Table 2-3 shows each vegetation community type, the number of polygons attributed with that type, and the total area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The vegetation map for Fort Davis NHS was developed using a combined strategy of automated digital image classification and direct analog image interpretation of aerial photography and satellite imagery. Initially, the aerial photography and satellite imagery were processed and entered into a geographic information system (GIS) along with ancillary spatial layers. A working map legend of ecologically based vegetation map units was developed using the vegetation classification described in Chapter 2 as the foundation. The intent was to develop map units that targeted the plant-association level wherever possible within the constraints of image quality, information content, and resolution. With the provisional legend and ground-control points provided by the field-plot data (the same data used to develop the vegetation classification), a combination of hands-on manual digitizing on a screen (heads-up screen digitizing) of polygons based on image interpretation and supervised image classifications was conducted. The outcome was a vegetation map composed of a suite of map units defined by plant associations and represented by sets of mapped polygons with similar spectral and site characteristics

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The vegetation map for Fort Davis NHS was developed using a combined strategy of automated digital image classification and direct analog image interpretation of aerial photography and satellite imagery. Initially, the aerial photography and satellite imagery were processed and entered into a geographic information system (GIS) along with ancillary spatial layers. A working map legend of ecologically based vegetation map units was developed using the vegetation classification described in Chapter 2 as the foundation. The intent was to develop map units that targeted the plant-association level wherever possible within the constraints of image quality, information content, and resolution. With the provisional legend and ground-control points provided by the field-plot data (the same data used to develop the vegetation classification), a combination of hands-on manual digitizing on a screen (heads-up screen digitizing) of polygons based on image interpretation and supervised image classifications was conducted. The outcome was a vegetation map composed of a suite of map units defined by plant associations and represented by sets of mapped polygons with similar spectral and site characteristics

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. GIS Database 2002-2005: Project Size = 1,898 acres Fort Larned National Historic Site (including the Rut Site) = 705 acres 16 Map Classes 11 Vegetated 5 Non-vegetated Minimum Mapping Unit = ½ hectare is the program standard but this was modified at FOLS to ¼ acre. Total Size = 229 Polygons Average Polygon Size = 8.3 acres Overall Thematic Accuracy = 92% To produce the digital map, a combination of 1:8,500-scale (0.75 meter pixels) color infrared digital ortho-imagery acquired on October 26, 2005 by the Kansas Applied Remote Sensing Program and 1:12,000-scale true color ortho-rectified imagery acquired in 2005 by the U.S. Department of Agriculture - Farm Service Agency’s Aerial Photography Field Office, and all of the GPS referenced ground data were used to interpret the complex patterns of vegetation and land-use. In the end, 16 map units (11 vegetated and 5 land-use) were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcGIS© software. Draft maps were printed, field tested, reviewed and revised. One hundred and six accuracy assessment (AA) data points were collected in 2006 by KNSHI and used to determine the map’s accuracy. After final revisions, the accuracy assessment revealed an overall thematic accuracy of 92%.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. GIS Database 2002-2005: Project Size = 1,898 acres Fort Larned National Historic Site (including the Rut Site) = 705 acres 16 Map Classes 11 Vegetated 5 Non-vegetated Minimum Mapping Unit = ½ hectare is the program standard but this was modified at FOLS to ¼ acre. Total Size = 229 Polygons Average Polygon Size = 8.3 acres Overall Thematic Accuracy = 92% To produce the digital map, a combination of 1:8,500-scale (0.75 meter pixels) color infrared digital ortho-imagery acquired on October 26, 2005 by the Kansas Applied Remote Sensing Program and 1:12,000-scale true color ortho-rectified imagery acquired in 2005 by the U.S. Department of Agriculture - Farm Service Agency’s Aerial Photography Field Office, and all of the GPS referenced ground data were used to interpret the complex patterns of vegetation and land-use. In the end, 16 map units (11 vegetated and 5 land-use) were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcGIS© software. Draft maps were printed, field tested, reviewed and revised. One hundred and six accuracy assessment (AA) data points were collected in 2006 by KNSHI and used to determine the map’s accuracy. After final revisions, the accuracy assessment revealed an overall thematic accuracy of 92%.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A final vegetation map for Fort Caroline National Monument was created to represent the vegetation occurring within the park during 2012. This product is the final of four steps necessary to produce an accurate vegetation map based upon aerial photographs. This includes the determination of the community element global (CEGL) codes (2008) and acquisition of aerial imagery (2012), using the aerial imagery, with ground truthing points (2014), to create a draft vegetation map, performing an accuracy assessment (2015), and then using all the available information to create a final vegetation map (2018).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A final vegetation map for Fort Caroline National Monument was created to represent the vegetation occurring within the park during 2012. This product is the final of four steps necessary to produce an accurate vegetation map based upon aerial photographs. This includes the determination of the community element global (CEGL) codes (2008) and acquisition of aerial imagery (2012), using the aerial imagery, with ground truthing points (2014), to create a draft vegetation map, performing an accuracy assessment (2015), and then using all the available information to create a final vegetation map (2018).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The vegetation map was developed through on-screen digitizing of available black and white digital ortho-photographs from 1984 and 1999. The photos were compiled into a GIS with a standard set of ancillary layers provided by the park service (boundaries, roads, facilities, etc.). Using the vegetation classification as the foundation for the map legend, map units were defined with respect to interpretable patterns in the photography, and with an eye to those patterns that would be most important in natural and cultural resources management within the park. The map included 19 map classes and covered a total of 278.13 ha.