Bathymetric Survey of the West Florida Shelf, Gulf of Mexico 2001 (NCEI Accession 0001410)
공공데이터포털
A zone of deep-water reefs is thought to extend from the mid and outer shelf south of Mississippi and Alabama to at least the northwestern Florida shelf off Panama City, Florida. Reefs off Mississippi and Alabama are found in water depths of 60 to 120 m (Ludwick and Walton, 1957, Gardner et al., in press) and were the focus of a multibeam echosounder mapping survey by the U.S. Geological Survey (USGS) in 2000 (Gardner et al., 2000, in press). It is critical to determine the accurate geomorphology and type of the reefs that occur because of their importance as benthic habitats for fisheries. These data are ArcInfo GRID and XYZ ASCII format data generated from a U.S. Geological Survey multibeam sonar survey of the West Florida Shelf, Gulf of Mexico. The data include high-resolution bathymetry and calibrated acoustic backscatter. File types include arc files .dat, .nit, and .adf. Documentation is included as metadata .txt files. Because the area is so large (i.e., the file sizes are very large), the area was subdivided into North, Central, and South regions as reflected in the data subdirectories for this accession.
Bathymetry of Mid Shelf Reef, US Virgin Islands 2005, 1M Grid, UTM 20 NAD83
공공데이터포털
This dataset contains an ESRI Grid with 1 meter cell size representing the bathymetry of the Mid Shelf Reef south of St. Thomas, US Virgin Islands. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 2/1/05 to 2/12/05. Data was acquired with a pole-mounted Reson 8101 ER multibeam echosounder (240 kHz) and processed by a NOAA contractor using CARIS HIPS v5.4 software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. An ASCII XYZ file was exported from the BASE surface and opened in ESRI ArcMap 9 as an XY event. Then the ArcToolbox conversion tool 'Feature to Raster' was used to generate the final ESRI Grid. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.