These data provide an accurate high-resolution shoreline compiled from imagery of Nome, AK . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

These data provide an accurate high-resolution shoreline compiled from imagery of NOME HARBOR, AK . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

The NOAA Composite Shoreline is primarily intended for high-resolution cartographic representation of the shoreline. It is a high-resolution vector shoreline based on a multi-temporal collection of NOAA coastal survey maps (T-sheets). Where T-sheets were unavailable, NOAA's extracted vector shoreline (EVS) was used to compile seamless shoreline coverage.

The United States Virgin Islands Topographic LiDAR project collected topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the islands of St. Thomas, St. John, St. Croix and numerous smaller islands and islets in the United States Virgin Islands. The islands of St. Thomas and St. John were acquired between November 9, 2013 and November 19, 2013. The island of St. Croix was acquired between November 27, 2013 and December 10, 2013. The entire area was comprised of 88 planned flight lines and approximately 1669 flight line kilometers. LiDAR was collected at an average of 0.7 meter point spacing for all acquired project areas. The classification classes as available from the NOAA Digital Coast are: 1 (Unclassified), 2 (Bare-earth ground), 7 (Noise), 9 (Water), 10 (Ignored Ground, points close to breakline features), 16 (Overlap Water), 17 (Overlap Unclassified), 18 (Overlap Bare-earth ground). Hydro flattened breaklines and Digital Elevation Models (DEMs) are also available for download. Please see the Supplemental Information field below for links to these data sets. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

These data were collected by the National Oceanic Atmospheric Administration National Geodetic Survey Remote Sensing Division using a Riegl Q680i-D system. The data includes topographic data in an LAS 1.2 format file classified as unclassified (1), ground (2), and water (9) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. This data set also includes lidar intensity values and encoded RGB image values. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Geodetic Survey (NGS), Remote Sensing Division Title: Chief, Remote Sensing Division Phone: 301-713-2663

These data provide an accurate high-resolution shoreline compiled from imagery of DAVIDSON INLET AND WARREN ISLAND, AK . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

The original intent of this site was to alleviate confusion about shorelines generated by National Oceanic and Atmospheric Administration (NOAA) agencies. However, the scope was expanded to include other commonly used federal shorelines. As a result, the site includes detailed descriptions for seven federal vector shorelines, many of which are derived from the same raw data sources. Because the characteristics of these shorelines can be similar, the differences among them can often be explained best by describing the specific purposes for which they were created.

The NOAA Coastal Mapping Shoreline Products from the Remote Sensing Division are primarily for application to the nautical charts produced by NOAA's Office of Coast Survey. NOAA Coastal Mapping Shoreline Products includes National Shoreline, Continually Updated Shoreline Product, and Raster T- and TP-Series Maps (T-Sheets). The National Geodetic Survey's coastal mapping shoreline products geospatially depict the coastal realm of the United States and its territories including the Great Lakes and their connecting navigable waterways.

These data provide an accurate high-resolution shoreline compiled from imagery of Harris Bay, AK . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://www.fisheries.noaa.gov/inport/item/39808

These data provide an accurate high-resolution shoreline compiled from imagery of Portage Cove, Haines, AK . This vector shoreline data is based on an office interpretation of imagery that may be suitable as a geographic information system (GIS) data layer. This metadata describes information for both the line and point shapefiles. The NGS attribution scheme 'Coastal Cartographic Object Attribute Source Table (C-COAST)' was developed to conform the attribution of various sources of shoreline data into one attribution catalog. C-COAST is not a recognized standard, but was influenced by the International Hydrographic Organization's S-57 Object-Attribute standard so the data would be more accurately translated into S-57. This resource is a member of https://inport.nmfs.noaa.gov/inport/item/39808