데이터셋 상세
미국
Aerial Imagery of the North Carolina Coast: 2019-09-08 to 2019-09-13, Post-Hurricane Dorian
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths, in response to storm events, with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to the Virginia-North Carolina border between September 8th, 2019, and September 13th, 2019, to document post-storm conditions after the passage of Hurricane Dorian (U.S. landfall was on September 6). The observations along the coastline cover an approximately 275-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural, undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired from a manned, fixed-wing aircraft using a Sony A7R 36 Megapixel digital camera, along with precise aircraft navigation Global Navigation Satellite System (GNSS) data. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 Hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data; precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens. Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 (NAD83(2011)).
데이터 정보
연관 데이터
Aerial Imagery of the North Carolina Coast: 2019-08-30 and 2019-09-02, Pre-Hurricane Dorian
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths, in response to storm events, with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to the Virginia-North Carolina border on August 30th and September 2, 2019, to document pre-storm conditions in preparation for the passing of Hurricane Dorian (U.S. landfall was on September 6). The observations along the coastline cover an approximately 275-kilometer (km) long by 300 to 700-meter (m) wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired from a manned, fixed-wing aircraft using a Sony A7R 36 Megapixel digital camera, along with precise aircraft navigation Global Navigation Satellite System (GNSS) data. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 Hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data; precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens. Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 (NAD83(2011)).
Aerial Imagery of the North Carolina Coast: 2020-08-05 to 2020-08-08, Post-Hurricane Isaias
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to Virginia Beach, Virginia between August 5th, 2020 and August 8th, 2020, to document post-storm conditions after the passage of Hurricane Isaias on August 3, 2020. The observations along the coastline cover an approximately 325-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2020-08-02, Pre-Hurricane Isaias
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to Corolla, North Carolina on August 2nd, 2020, to document pre-storm conditions in preparation for the passage of Hurricane Isaias on August 3, 2020. The observations along the coastline cover an approximately 245-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2020-02-08 to 2020-02-09
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths, in response to storm events, with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to the Virginia-North Carolina border on February 8th and 9th, 2020, to document recovery conditions 5 months after the passage of Hurricane Dorian in September 2019. The observations along the coastline cover an approximately 275-kilometer-long by 300 to 800-meter-wide swath of coastline and encompass both highly developed towns as well as natural, undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired from a manned, fixed-wing aircraft using a Sony A7R 36 Megapixel digital camera, along with precise aircraft navigation Global Navigation Satellite System (GNSS) data. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 Hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data; precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens. Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 (NAD83(2011)).
Aerial Imagery of the North Carolina Coast: 2021-04-30
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout to Corolla, North Carolina on April 30th, 2021, to document the state of the coast just prior to the start of the 2021 Atlantic hurricane season. The observations along the coastline cover an approximately 260-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2021-09-20
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout to just north of Duck, North Carolina on September 20th, 2021, to document the state of the coast during the 2021 Atlantic hurricane season. The observations along the coastline cover an approximately 250-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2022-06-15
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout to just north of Duck, North Carolina on June 15th, 2022, to document the state of the coast during the 2022 Atlantic hurricane season. The observations along the coastline cover an approximately 250-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2024-11-06 to 2024-11-13
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout to just north of Duck, North Carolina on November 6 and 13, 2024, to document the state of the coast during the 2024 Atlantic hurricane season. The observations along the coastline cover an approximately 250-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.
Aerial Imagery of the North Carolina Coast: 2020-09-28
공공데이터포털
The U.S. Geological Survey (USGS) Remote Sensing Coastal Change (RSCC) project collects aerial imagery along coastal swaths with optimized endlap/sidelap and precise position information to create high-resolution orthomosaics, three-dimensional (3D) point clouds, and digital elevation/surface models (DEMs/DSMs) using Structure-from-Motion (SfM) photogrammetry methods. These products are valuable for measuring topographic and landscape change, and for understanding coastal vulnerability and response to disturbance events. A nadir (vertical) aerial imagery survey was conducted from Cape Lookout, North Carolina to the North Carolina-Virginia border on September 28th, 2020, to document recovery conditions after the passage of Hurricane Isaias on August 3, 2020. The observations along the coastline cover an approximately 275-kilometer-long by 300 to 700-meter-wide swath of coastline and encompass both highly developed towns as well as natural undeveloped areas, including the federal lands of Cape Lookout National Seashore and Cape Hatteras National Seashore. Low altitude (300 meters above ground level) digital aerial imagery were acquired with a manned, fixed-wing aircraft using the "Precision Airborne Camera (PAC)" System (version 2). The PAC system is operated by C.W. Wright and consists of a mounted fixed-lens digital camera, along with a custom integrated survey-grade Global Navigation Satellite System (GNSS) receiver. Data were collected in shore-parallel lines, flying at approximately 50 meters per second (m/s) and capturing true color imagery at 1 hertz (Hz), resulting in image footprints with approximately 75-80% endlap, 60-70% sidelap, and a 5.3-centimeter (cm) ground sample distance (GSD). The precise time of each image capture (flash event) was recorded, and the corresponding aircraft position was computed during post-processing of the GNSS data. Precise image positions can then be determined by accounting for the lever arm offsets between the aircraft GNSS antenna and the camera lens, which are provided in the PAC System metadata (Kranenburg and others, 2023, https://cmgds.marine.usgs.gov/data-services/rscc/PrecisionAirborneCameraSystem). Position data, provided as latitude/longitude/ellipsoid height, is referenced to the North American Datum of 1983 National Spatial Reference System 2011 (NAD83(2011)) coordinate system.