These tabular data are the summarization of land use/land cover related variables within the Delaware River watershed at the 1:24,000 scale using the xstrm methodology. Variables being counted as land use/land cover related include all land use and land cover data. Outputs consist of tabular comma-separated values files (CSVs), and parquet formatted files for both the local catchment and network summaries linked to the National Hydrography Dataset Plus High-Resolution (NHDPlus HR) framework by NHDPlus ID. Local catchments are defined as the single catchment within which the data are summarized. Network accumulation summaries were completed for each of these catchments and their respective upstream catchments. The summarized data tables are structured as a single column representing the catchment id values (i.e. nhdplusid) and the remaining columns consisting of the summarized variables. The downstream network summary type is not present within the dataset as no summaries were conducted using that summary type. Additionally, for a full description of the variables included within these summaries see xstrm_nhdhr_lulc_delaware_river_datadictionary.csv in the attached files. The xstrm local summary methodology takes either raster or point data as input then summarizes those data by "zones" (hereafter referred to as catchment(s)), in this case the NHDPlus HR catchments. The network summaries then take the results from the local summaries and calculates the desired network summary statistic for the local catchment and its respective upstream or downstream catchments. As a note concerning use of these data, any rasters summarized within this process only had their cells included within a catchment if the center of the raster cell fell within the catchment boundary. However, the resolution of the input raster data for these summaries was considered to provide completely adequate coverage of the summary catchments using this option and given computing power limitations. If a confirmed complete coverage of a catchment is desired (even if a raster cell only is minimally included within the catchment) then it is recommended to rerun the xstrm summary process with the "All Touched" option set to True. Further information on the Xstrm summary process can be found at the Xstrm software release pages: Xstrm: Wieferich, D.J., Williams, B., Falgout, J.T., Foks, N.L. 2021. xstrm. U.S. Geological Survey software release. https://doi.org/10.5066/P9P8P7Z0. Xstrm Local: Wieferich, D.J., Gressler B., Krause K., Wieczorek M., McDonald, S. 2022. xstrm_local Version-1.1.0. U.S. Geological Survey software release. https://doi.org/10.5066/P98BOGI9.

These tabular data are the summarization of land use/land cover related variables within the Delaware River watershed at the 1:24,000 scale using the xstrm methodology. Variables being counted as land use/land cover related include all land use and land cover data. Outputs consist of tabular comma-separated values files (CSVs), and parquet formatted files for both the local catchment and network summaries linked to the National Hydrography Dataset Plus High-Resolution (NHDPlus HR) framework by NHDPlus ID. Local catchments are defined as the single catchment within which the data are summarized. Network accumulation summaries were completed for each of these catchments and their respective upstream catchments. The summarized data tables are structured as a single column representing the catchment id values (i.e. nhdplusid) and the remaining columns consisting of the summarized variables. The downstream network summary type is not present within the dataset as no summaries were conducted using that summary type. Additionally, for a full description of the variables included within these summaries see xstrm_nhdhr_lulc_delaware_river_datadictionary.csv in the attached files. The xstrm local summary methodology takes either raster or point data as input then summarizes those data by "zones" (hereafter referred to as catchment(s)), in this case the NHDPlus HR catchments. The network summaries then take the results from the local summaries and calculates the desired network summary statistic for the local catchment and its respective upstream or downstream catchments. As a note concerning use of these data, any rasters summarized within this process only had their cells included within a catchment if the center of the raster cell fell within the catchment boundary. However, the resolution of the input raster data for these summaries was considered to provide completely adequate coverage of the summary catchments using this option and given computing power limitations. If a confirmed complete coverage of a catchment is desired (even if a raster cell only is minimally included within the catchment) then it is recommended to rerun the xstrm summary process with the "All Touched" option set to True. Further information on the Xstrm summary process can be found at the Xstrm software release pages: Xstrm: Wieferich, D.J., Williams, B., Falgout, J.T., Foks, N.L. 2021. xstrm. U.S. Geological Survey software release. https://doi.org/10.5066/P9P8P7Z0. Xstrm Local: Wieferich, D.J., Gressler B., Krause K., Wieczorek M., McDonald, S. 2022. xstrm_local Version-1.1.0. U.S. Geological Survey software release. https://doi.org/10.5066/P98BOGI9.

This tabular data set represents the presence of six National Hydrography Dataset (NHD) high resolution waterbody types compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. The six types of waterbodies presented here are: playa, ice mass, lake/pond, reservoir, swamp/marsh, and estuary. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the NHDPlus high resolution waterbodies produced by USGS , 2015. Units are percent. Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the presence of six National Hydrography Dataset (NHD) high resolution waterbody types compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. The six types of waterbodies presented here are: playa, ice mass, lake/pond, reservoir, swamp/marsh, and estuary. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the NHDPlus high resolution waterbodies produced by USGS , 2015. Units are percent. Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the presence of six National Hydrography Dataset (NHD) high resolution waterbody types compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. The six types of waterbodies presented here are: playa, ice mass, lake/pond, reservoir, swamp/marsh, and estuary. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the NHDPlus high resolution waterbodies produced by USGS , 2015. Units are percent. Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the percent of Hydrologic Landscape Regions compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the "Hydrologic landscape regions of the United States" produced by the United States Geological Survey (Wolock, 2003). Units are percent. The "Hydrologic landscape regions of the United States" are a 20-class classification scheme of noncontiguous regions (HLRs) built on the basis of similarities in land-surface form, geologic texture, and climate characteristics (Wolock, 2003). Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the percent of Hydrologic Landscape Regions compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the "Hydrologic landscape regions of the United States" produced by the United States Geological Survey (Wolock, 2003). Units are percent. The "Hydrologic landscape regions of the United States" are a 20-class classification scheme of noncontiguous regions (HLRs) built on the basis of similarities in land-surface form, geologic texture, and climate characteristics (Wolock, 2003). Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the percent of Hydrologic Landscape Regions compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the "Hydrologic landscape regions of the United States" produced by the United States Geological Survey (Wolock, 2003). Units are percent. The "Hydrologic landscape regions of the United States" are a 20-class classification scheme of noncontiguous regions (HLRs) built on the basis of similarities in land-surface form, geologic texture, and climate characteristics (Wolock, 2003). Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the percent of land cover classes from the 2011 National Land Cover Dataset compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the "National Land Cover Database 2011" produced by the United States Geological Survey (Homer and others, 2011). Units are percent. The "National Land Cover Database 2011" (NLCD 2011) is a 16-class (additional four classes in Alaska only) land cover classification scheme that has been applied consistently across all 50 United States and Puerto Rico at a spatial resolution of 30 meters. Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).

This tabular data set represents the percent of land cover classes from the 2011 National Land Cover Dataset compiled for two spatial components of the NHDPlus version 2 data suite (NHDPlusv2) for the conterminous United States; 1) individual reach catchments and 2) reach catchments accumulated upstream through the river network. This dataset can be linked to the NHDPlus version 2 data suite by the unique identifier COMID. The source data is the "National Land Cover Database 2011" produced by the United States Geological Survey (Homer and others, 2011). Units are percent. The "National Land Cover Database 2011" (NLCD 2011) is a 16-class (additional four classes in Alaska only) land cover classification scheme that has been applied consistently across all 50 United States and Puerto Rico at a spatial resolution of 30 meters. Reach catchment information characterizes data at the local scale. Reach catchments accumulated upstream through the river network characterizes cumulative upstream conditions. Network-accumulated values are computed using two methods, 1) divergence-routed and 2) total cumulative drainage area. Both approaches use a modified routing database to navigate the NHDPlus reach network to aggregate (accumulate) the metrics derived from the reach catchment scale. (Schwarz and Wieczorek, 2018).