The Northwestern Hawaiian islands were sampled during October 2000 at 63 stations on 9 atolls or islands under the lead of NOAA. This work is affiliated with the Northwest Hawaii Islands Coral Reef Assessment and Monitoring Program (NOWRAMP), which performed a cruise in September 2000. One aspect of this study was benthic community characterization, which was accomplished via sample collection by National Oceanic and Atmospheric Administration (NOAA) personnel and laboratory and data analysis by Barry A. Vittor & Associates, Inc. (BVA). Sampling devices varied during the field collections. Density, diversity and evenness could only be calculated at stations sampled with a Young dredge (area = 0.04 m2).

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 6 towboard surveys (13.9180 km in length), were conducted at Laysan Island during the NW Hawaiian Islands RAMP Cruise TC0011 from 08 September - 06 October 2000. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

This archive package contains data on species composition, density, size, and abundance for coral reef fish as well as coral counts, benthic cover, and macroalga cover in the West Hawaii Habitat Focus Area along the Kona coast of the island of Hawaii. Data provided in this collection were gathered as part of the NOAA Habitat Blueprint initiative with support from the Coral Reef Conservation Program. Data were collected primarily by The Nature Conservancy Hawaii. Data were collected in 2015 using the Belt Transect method. This is the first year in a series of monitoring efforts which have taken place in subsequent years to evaluate the resilience of coral reefs in the Focus Area. This dataset serves as a baseline as it was collected during the 2015 coral bleaching event. The dataset accompanies the NOAA technical report Maynard et al. 2016.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 15 towboard surveys (34.4891 km in length), were conducted at Midway Atoll during the NW Hawaiian Islands RAMP Cruise TC0207 from 8 September - 7 October 2002. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 22 towboard surveys (54.5481 km in length), were conducted at Pearl And Hermes Atoll during the NW Hawaiian Islands RAMP Cruise TC0207 from 8 September - 7 October 2002. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 4 towboard surveys (7.2872 km in length), were conducted at Laysan Island during the NW Hawaiian Islands RAMP Cruise TC0207 from 8 September - 7 October 2002. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 16 towboard surveys (38.9358 km in length), were conducted at Midway Atoll during the NW Hawaiian Islands RAMP Cruise HI0809 from 12 September - 12 October 2008. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 22 towboard surveys (52.3386 km in length), were conducted at Pearl And Hermes Atoll during the NW Hawaiian Islands RAMP Cruise OES0306 from 12 July - 17 August 2003. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 5 towboard surveys (6.8656 km in length), were conducted at Raita Bank during the NW Hawaiian Islands RAMP Cruise TC0110 from 10 September - 1 October 2001. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 17 towboard surveys (41.3231 km in length), were conducted at Midway Atoll during the NW Hawaiian Islands RAMP Cruise OES0306 from 12 July - 17 August 2003. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.