This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Tampa (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Tampa (FL) WFO - Citrus, Hernando, Pasco, Pinellas, and Hillsborough Counties 2. Tampa (FL) WFO - Manatee, Sarasota, Charlotte, and Lee Counties This metadata record describes the DEM for Tampa (FL) WFO - Manatee, Sarasota, Charlotte, and Lee Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Manatee, Sarasota, Charlotte, and Lee counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM) and the Southwest Florida Water Management District (SWFWMD). The FDEM LiDAR data for Manatee, Sarasota, Charlotte and Lee Counties was collected in 2007 and 2008. Small portions of Manatee and Charlotte Counties were collected in 2005. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM and SWFWMD. In some cases, the National Wetlands Inventory and National Hydrography Dataset were used to supplement breaklines from FDEM and SWFWMD. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Miami (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Miami (FL) WFO - Collier and Monroe (Mainland) Counties 2. Miami (FL) WFO - Palm Beach, Broward, Miami-Dade, and Monroe (Keys) Counties This metadata record describes the DEM for Miami (FL) WFO - Palm Beach, Broward, Miami-Dade, and Monroe (Keys) Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Palm Beach, Broward, Miami-Dade, and Monroe (Keys) counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM). LiDAR data for Monroe, Miami-Dade, Broward and Palm Beach counties was collected in 2007 and 2008. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM and the South Florida Water Management District. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Jacksonville (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Jacksonville (FL) WFO - Duval, Clay, and Nassau Counties 2. Jacksonville (FL) WFO - St. Johns, Flagler and Putnam Counties This metadata record describes the DEM for Jacksonville (FL) WFO - St. Johns, Flagler and Putnam Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of St. Johns, Flagler and Putnam counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM) and St. Johns County. LiDAR data for Putnam and Flagler counties was collected between 2004 and 2008. Lidar data was collected in 2008 for St. Johns County. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM and St Johns County. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Florida, West 1 digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Charlotte, Desoto, Glades, Hernando, Hillsborough, Manatee, Pasco, Pinellas, and Sarasota Counties. The DEM was produced from the following lidar data sets: 1. 2018 Florida Peninsular FDEM - Charlotte 2. 2018 Florida Peninsular FDEM - Desoto 3. 2018 Southwest FL Lidar (A, B, B TL) 4. 2018 Florida Peninsular FDEM - Glades 5. 2019 Florida Peninsular - Hernando 6. 2017 Hillsborough County Florida Lidar 7. 2018 Florida Peninsular FDEM - Manatee 8. 2018 Pasco County Florida Lidar 9. 2018 Florida Peninsular - Pinellas 10. 2018 Florida Peninsular FDEM - Sarasota The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Jacksonville (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Jacksonville (FL) WFO - Duval, Clay, and Nassau Counties 2. Jacksonville (FL) WFO - St. Johns, Flagler and Putnam Counties This metadata record describes the DEM for Jacksonville (FL) WFO - Duval, Clay, and Nassau Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Duval, Clay, and Nassau counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM). LiDAR data for Nassau, Duval, and Clay counties were collected between 2004 and 2008. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the South Carolina North digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Georgetown, WIlliamsburg, Horry, Florence and Marion Counties. The DEM was produced from the following lidar data sets: 1. 2017 SC DNR Lidar DEM: Georgetown County, SC 2. 2017 SC DNR Lidar DEM: Williamsburg County, SC 3. 2014 SC DNR Lidar DEM: Horry County, SC 4. 2007 SC DNR Lidar DEM: Florence County, SC 5. 2007 SC DNR Lidar DEM: Marion County, SC The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88, Geoid12B) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Florida, West 2 digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Citrus, Dixie, Gilchrist, Hernando, Levy, Marion, and Pasco Counties. The DEM was produced from the following lidar data sets: 1. 2018 Florida Peninsular - Citrus 2. 2018 Florida Peninsular FDEM - Dixie 3. 2018 Florida Peninsular FDEM - Gilchrist 4. 2019 Florida Peninsular - Hernando 5. 2018 Florida Peninsular - Levy 6. 2018 Florida Peninsular - Marion 7. 2018 Pasco County Florida Lidar The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Melbourne (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Melbourne (FL) WFO - Brevard and Volusia Counties 2. Melbourne (FL) WFO - Indian River, St. Lucie, and Martin Counties This metadata record describes the DEM for Miami (FL) WFO - Brevard and Volusia Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Brevard and Volusia counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM) and Volusia County. LiDAR data for Brevard county was collected in 2007. Lidar data was collected in 2006 for Volusia County. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM and Volusia County. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

This digital elevation model (DEM) is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer. The DEMs created for this project were developed using the NOAA National Weather Service's Weather Forecast Office (WFO) boundaries. Because the WFO boundaries can cover large areas, the WFO DEM was divided into smaller DEMs to ensure more manageable file sizes. The Melbourne (FL) WFO DEM was split into two smaller DEMs. They are divided along county lines and are: 1. Melbourne (FL) WFO - Brevard and Volusia Counties 2. Melbourne (FL) WFO - Indian River, St. Lucie, and Martin Counties This metadata record describes the DEM for Miami (FL) WFO - Indian River, St. Lucie, and Martin Counties. The DEM includes the best available lidar data known to exist at the time of DEM creation for the coastal areas of Indian River, St. Lucie, and Martin counties, that met project specifications. The DEM is derived from LiDAR datasets collected for the Florida Department of Emergency Management (FDEM). LiDAR data for Indian River, St. Lucie and Martin counties was collected in 2007. Hydrographic breaklines used in the creation of the DEM were obtained from FDEM. The DEMs are hydro flattened such that water elevations are less than or equal to 0 meters. The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 5 meters.

These data were created as part of the National Oceanic and Atmospheric Administration Office for Coastal Management's efforts to create an online mapping viewer called the Sea Level Rise and Coastal Flooding Impacts Viewer. It depicts potential sea level rise and its associated impacts on the nation's coastal areas. The purpose of the mapping viewer is to provide coastal managers and scientists with a preliminary look at sea level rise and coastal flooding impacts. The viewer is a screening-level tool that uses nationally consistent data sets and analyses. Data and maps provided can be used at several scales to help gauge trends and prioritize actions for different scenarios. The Sea Level Rise and Coastal Flooding Impacts Viewer may be accessed at: https://coast.noaa.gov/slr. This metadata record describes the Maryland, West digital elevation model (DEM), which is a part of a series of DEMs produced for the National Oceanic and Atmospheric Administration Office for Coastal Management's Sea Level Rise and Coastal Flooding Impacts Viewer described above. This DEM includes the best available lidar known to exist at the time of DEM creation that met project specifications. This DEM includes data for Anne Arundel, Baltimore, Calvert, Howard, and Prince George's Counties and Baltimore City. The DEM was produced from the following lidar data sets: 1. 2011 Anne Arundel County, MD Lidar 2. 2015 Sandy Supplemental MD/PA QL2 Lidar (Baltimore City) 3. 2015 Baltimore County, MD Lidar 4. 2011 Calvert County, MD Lidar 5. 2011 Howard County, MD Lidar 6. 2014 USGS Hurricane Sandy Supplemental for National Capital Region (NCR) The DEM is referenced vertically to the North American Vertical Datum of 1988 (NAVD88, Geoid12B) with vertical units of meters and horizontally to the North American Datum of 1983 (NAD83). The resolution of the DEM is approximately 3 meters.