This digital dataset contains historical geochemical and other information for 100 samples of groundwater from 71 wells located within 3 miles of the Poso Creek Oil Field in Kern County, California. An additional 12 wells in the Poso Creek study area, but co-located within 3 miles of the adjacent Rosedale and Rosedale Ranch Oil Fields, were not included in this data release; these data are planned for a future data release associated with those fields. The sampled wells include water-supply wells used primarily for domestic, irrigation, and industrial uses. Numerical water chemistry data were compiled from two data sources: 1) Kern County Public Health Services Department (KCPHSD) PDF (Portable Document Format) files, and 2) the Eastside Water Management Area (EWMA) Groundwater Sustainability Plan (GSP) Chapter. These data sources include varying location and well-construction information. Locations for most of the wells represent either well-specific coordinates provided in the KCPHSD PDFs, approximate locations determined using ArcGIS (GIS, Geographic Information System) software based on descriptive information or location maps in the KCPHSD PDFs, parcel centroid coordinates determined from a GIS parcel shapefile (KERN PARCEL) based on parcel numbers provided by either the KCPHSD or EWMA data source, or approximate locations from Google Earth based on visual identification of well locations. For two wells (Dataset_IDs 1 and 2) coordinates represent the locations provided by the California Department of Water Resources Water Data Library (CDWR WDL) as those particular wells are located in that database in association with water-level measurement data. For three wells (Dataset_IDs 22, 30, and 42) having limited information, locations represent meridian, township, range, section, and quarter-quarter section (MTRSQQ) centroids. Information on well construction was compiled from California Department of Water Resources Well Completion Reports (CDWR-WCR) included with the PDFs located on the KCPHSD website, or located on the CDWR Well Completion Reports Map Application website. Well construction from CDWR-WCRs was available for 53 of the 71 wells. For one well (Dataset_ID 5), a WCR could not be located, however, well construction information was available in the EWMA GSP. Data were manually compiled into two separate files described as follows: 1) a summary data file that includes well identifiers, location, construction, the number of chemistry samples, the period of record, specific sample dates for each site, and an inventory of which constituent groups were sampled on each date; and 2) a data file of geochemistry analyses for selected constituents classified into one of the following groups: water-quality indicators, major and minor ions, nutrients, trace elements, naturally occurring radioactive material (NORM), and volatile organic compounds (VOCs). Ion (charge) balance calculations and percent error of these calculations were included for samples having a complete suite of major ion analyses. Parameter code, analytical method, reporting level, reporting level type, and supplemental notes were included where available or pertinent. A data dictionary was created to describe the geochemistry data file and is provided with this data release.

This digital dataset contains historical geochemical and other information for 266 samples of groundwater (GW) from 208 wells located within 3 miles of the Edison, Mountain View, and Ant Hill Oil Fields in Kern County, California. The sampled wells include water-supply wells used primarily for domestic, irrigation, and public uses; however, the specific water-supply use of 27 wells is unknown ('unk'). Three wells with water use denoted as 'WS' (water supply) were documented as having originally been used in support of oil production, or were converted from oil production wells to water-supply wells by the time they were sampled. Numerical water chemistry data were compiled from five data sources: 1) Kern County Public Health Services Department (KCPHSD, 2017), 2) California Department of Conservation's Geologic Energy Management Division (CalGEM) archived analytical reports (CalGEM, 2021), 3) CalGEM Underground Injection Control (UIC) program hard-copy records (CalGEM-UIC, 2017), 4) CalGEM's Well Finder (WF) online database (CalGEM-WF, 2022), and 5) the California State Water Resources Control Board GeoTracker online data portal (SWRCB-GT, 2020). These data sources include varying degrees of location and well construction information. Data were manually compiled into two separate files described as follows: 1) a summary data file (EMA_GW_Summary_Data.xlsx) that includes well identifiers, location, construction, the number of chemistry samples, the period of record, specific sample dates for each site, and an inventory of which constituent groups were sampled on each date, and 2) a data file of geochemistry analyses for selected constituents (EMA_GW_Geochemistry.xlsx) classified into one of the following groups: water-quality indicators, major and minor ions, nutrients, trace elements, naturally occurring radioactive material (NORM), and volatile organic compounds (VOCs). Ion (charge) balance calculations and percent error of these calculations were included for samples having a complete suite of major ion analyses. Parameter code, analytical method, reporting level, reporting level type, dilution factor, and supplemental notes were included where available or pertinent. A data dictionary (EMA_GW_Data-Dictionary. xlsx) describes the geochemistry data file and is provided with this data release.

This digital dataset contains historical geochemical and other information for 255 samples of groundwater from 41 wells located within 3-miles of the San Ardo Oil Field in Monterey County, central California. Data were compiled from preexisting datasets into two separate data files described as follows: 1) a summary data file identifying each well, it's location, basic well construction, the number of chemistry samples and period of record, and data sources; and 2) a data file of geochemistry analyses for selected water-quality indicators, major and minor ions, nutrients, and trace elements, plus parameter code and (or) method, reporting level, reporting level type, and supplemental notes. A data dictionary was created to describe the geochemistry data file and is provided with this data release.

This digital dataset contains historical geochemical and other information for 255 samples of groundwater from 41 wells located within 3-miles of the San Ardo Oil Field in Monterey County, central California. Data were compiled from preexisting datasets into two separate data files described as follows: 1) a summary data file identifying each well, it's location, basic well construction, the number of chemistry samples and period of record, and data sources; and 2) a data file of geochemistry analyses for selected water-quality indicators, major and minor ions, nutrients, and trace elements, plus parameter code and (or) method, reporting level, reporting level type, and supplemental notes. A data dictionary was created to describe the geochemistry data file and is provided with this data release.

The California State Water Resources Control Board (State Water Board) initiated the Oil and Gas Regional Monitoring Program (RMP) to assess effects of oil and gas development on groundwater designated for any beneficial use. The U.S. Geological Survey (USGS) is the technical lead in conducting the RMP through the California Oil, Gas, and Groundwater (COGG) Program, working in cooperation with the State Water Board, and in partnership with other State and local agencies. The USGS collected and analyzed groundwater, surface water, and associated quality control (QC) samples in the Poso Creek Oil Field study area during February 2020-December 2021. Groundwater samples were collected from eleven irrigation, two domestic, two public supply, four monitoring wells, two institutional wells, and two surface water sites located within a five km buffer zone surrounding the Poso Creek Oil Field in Kern County, California. Samples were collected using established groundwater data-collection protocols and procedures. Samples were analyzed for water-quality indicators, major and minor ions, nutrients, trace elements, volatile organic compounds (VOCs), naturally occurring radioactive material, geochemical and age-dating tracers, dissolved organic carbon (DOC), dissolved standard and hydrocarbon gases (methane through hexane), and dissolved noble gasses, atmospheric gases, and surrogates. Approximately two hundred and eight constituents and water-quality indicators were measured. QC samples analyzed as part of the Poso Creek Oil Field study included replicates, source-solution blanks, field and equipment blanks, and laboratory spikes and surrogates.

The California State Water Resources Control Board (State Water Board) initiated the Oil and Gas Regional Monitoring Program (RMP) to assess effects of oil and gas development on groundwater designated for any beneficial use. The U.S. Geological Survey (USGS) is the technical lead in conducting the RMP through the California Oil, Gas, and Groundwater (COGG) Program, working in cooperation with the State Water Board, and in partnership with other State and local agencies. The USGS collected and analyzed groundwater, surface water, and associated quality control (QC) samples in the Poso Creek Oil Field study area during February 2020-December 2021. Groundwater samples were collected from eleven irrigation, two domestic, two public supply, four monitoring wells, two institutional wells, and two surface water sites located within a five km buffer zone surrounding the Poso Creek Oil Field in Kern County, California. Samples were collected using established groundwater data-collection protocols and procedures. Samples were analyzed for water-quality indicators, major and minor ions, nutrients, trace elements, volatile organic compounds (VOCs), naturally occurring radioactive material, geochemical and age-dating tracers, dissolved organic carbon (DOC), dissolved standard and hydrocarbon gases (methane through hexane), and dissolved noble gasses, atmospheric gases, and surrogates. Approximately two hundred and eight constituents and water-quality indicators were measured. QC samples analyzed as part of the Poso Creek Oil Field study included replicates, source-solution blanks, field and equipment blanks, and laboratory spikes and surrogates.

The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board collected produced water and gas samples in the Poso Creek, Midway-Sunset, and Buena Vista Oil Fields in Kern County in 2020 and 2021. Sampled sites included oil wells; injectate from tanks, pipelines, and injection wells where produced water from many wells, after removal of oil, is stored or transported before underground injection; and integrated produced water from multiple oil wells collected from pipelines before oil removal. This digital dataset contains the site information, analyzing laboratories and methods, and water and gas chemistry and quality-control results for these samples. Chemistry results include concentrations of dissolved noble and hydrocarbon gases and their isotopic composition; concentrations of inorganic constituents including salinity, major and minor ions, trace elements, and nutrients; dissolved organic carbon and optical properties of dissolved organic carbon; stable isotopes of water, strontium dissolved in water, and carbon in dissolved inorganic carbon; and radium isotopes. Samples were analyzed in the field and by eight laboratories operated or contracted by the USGS.

The U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board collected produced water and gas samples in the Poso Creek, Midway-Sunset, and Buena Vista Oil Fields in Kern County in 2020 and 2021. Sampled sites included oil wells; injectate from tanks, pipelines, and injection wells where produced water from many wells, after removal of oil, is stored or transported before underground injection; and integrated produced water from multiple oil wells collected from pipelines before oil removal. This digital dataset contains the site information, analyzing laboratories and methods, and water and gas chemistry and quality-control results for these samples. Chemistry results include concentrations of dissolved noble and hydrocarbon gases and their isotopic composition; concentrations of inorganic constituents including salinity, major and minor ions, trace elements, and nutrients; dissolved organic carbon and optical properties of dissolved organic carbon; stable isotopes of water, strontium dissolved in water, and carbon in dissolved inorganic carbon; and radium isotopes. Samples were analyzed in the field and by eight laboratories operated or contracted by the USGS.

This digital dataset contains historical geochemical and other information for 481 samples of produced water (PW) from 408 sites in the Edison, Mountain View, and Ant Hill Oil Fields in Kern County, California. Produced water is a term used in the oil industry to describe water that is produced from oil wells as a byproduct along with the oil and gas. The locations from which these historical samples have been collected include 199 wells, 67 sumps, 43 storage tanks (not associated with a specific well), and 104 unidentifiable sample sources which could not be classified because of insufficient information. The wells include 176 sites identifiable by an API (American Petroleum Institute) number and 23 sites for which an API designation could not be found, but which based on the water chemistry data source, site name, sample description, or other ancillary information have been classified as wells. Well depth, perforation depths, and (or) depths referred to on geochemistry reports as interval or zone produced, are available for 177 of these wells. Sites representing sumps and storage tanks were classified in a similar manner as wells based on the water chemistry data source, site name, sample description, or other ancillary information. Numerical water chemistry data were compiled from six data sources: 1) California Geologic Energy Management Division (CalGEM) Aquifer Exemptions (AE) Status webpage analytical reports (CalGEM, 2016), 2) CalGEM archived analytical reports (CalGEM, 2021), 3) CalGEM Underground Injection Control (UIC) program hard copies of laboratory analytical reports (CalGEM-UIC, 2017), 4) CalGEM's online Well Finder (WF) database of well history files (CalGEM-WF, 2022), 5) California State Water Resources Control Board GeoTracker (SWRCB-GT) online data portal analytical reports (SWRCB-GT, 2022), and 6) three California Department of Water Resources (CDWR) historical reports with water-chemistry data for samples from oil-producing zones of wells (characterized as "formation" water) and wastewater disposal sumps (CDWR/CVRWQCB-E, 1953; CDWR/CVRWQCB-M, 1956; and CDWR/CVRWQCB-A, 1957). Sample site characteristics, such as well construction details, were attributed using a combination of information provided with the laboratory analysis reports and well history files from CalGEM-WF (2022). The compiled data are divided into two separate data files described as follows: 1) a summary data file (EMA_PW_Summary_Data.xlsx) identifying each site by name, the site location, basic construction information, and American Petroleum Institute (API) number (for wells), the number of chemistry samples, period of record, sample description, and the geologic formation associated with the origin of the sampled water, or intended destination of the sample (formation into which water was to intended to be injected for samples associated with Site Type labeled as water disposal well), specific sample dates for each site, and an inventory of which constituent groups were sampled on each date; and 2) a data file of geochemistry analyses for selected constituents (EMA_PW_Geochemistry.xlsx) classified into one of the following groups: water-quality indicators, major and minor ions, nutrients, trace elements, naturally occurring radioactive material (NORM), volatile organic compounds (VOCs), and hydrocarbons. Ion (charge) balance calculations and percent error of these calculations were included for samples having a complete suite of major ion analyses. Analytical method, reporting level, reporting level type, dilution factor, and supplemental notes were included where available or pertinent. A data dictionary (EMA_PW_Data-Dictionary. xlsx) describes the geochemistry data file and is provided with this data release.

This digital dataset contains historical geochemical and other information for 481 samples of produced water (PW) from 408 sites in the Edison, Mountain View, and Ant Hill Oil Fields in Kern County, California. Produced water is a term used in the oil industry to describe water that is produced from oil wells as a byproduct along with the oil and gas. The locations from which these historical samples have been collected include 199 wells, 67 sumps, 43 storage tanks (not associated with a specific well), and 104 unidentifiable sample sources which could not be classified because of insufficient information. The wells include 176 sites identifiable by an API (American Petroleum Institute) number and 23 sites for which an API designation could not be found, but which based on the water chemistry data source, site name, sample description, or other ancillary information have been classified as wells. Well depth, perforation depths, and (or) depths referred to on geochemistry reports as interval or zone produced, are available for 177 of these wells. Sites representing sumps and storage tanks were classified in a similar manner as wells based on the water chemistry data source, site name, sample description, or other ancillary information. Numerical water chemistry data were compiled from six data sources: 1) California Geologic Energy Management Division (CalGEM) Aquifer Exemptions (AE) Status webpage analytical reports (CalGEM, 2016), 2) CalGEM archived analytical reports (CalGEM, 2021), 3) CalGEM Underground Injection Control (UIC) program hard copies of laboratory analytical reports (CalGEM-UIC, 2017), 4) CalGEM's online Well Finder (WF) database of well history files (CalGEM-WF, 2022), 5) California State Water Resources Control Board GeoTracker (SWRCB-GT) online data portal analytical reports (SWRCB-GT, 2022), and 6) three California Department of Water Resources (CDWR) historical reports with water-chemistry data for samples from oil-producing zones of wells (characterized as "formation" water) and wastewater disposal sumps (CDWR/CVRWQCB-E, 1953; CDWR/CVRWQCB-M, 1956; and CDWR/CVRWQCB-A, 1957). Sample site characteristics, such as well construction details, were attributed using a combination of information provided with the laboratory analysis reports and well history files from CalGEM-WF (2022). The compiled data are divided into two separate data files described as follows: 1) a summary data file (EMA_PW_Summary_Data.xlsx) identifying each site by name, the site location, basic construction information, and American Petroleum Institute (API) number (for wells), the number of chemistry samples, period of record, sample description, and the geologic formation associated with the origin of the sampled water, or intended destination of the sample (formation into which water was to intended to be injected for samples associated with Site Type labeled as water disposal well), specific sample dates for each site, and an inventory of which constituent groups were sampled on each date; and 2) a data file of geochemistry analyses for selected constituents (EMA_PW_Geochemistry.xlsx) classified into one of the following groups: water-quality indicators, major and minor ions, nutrients, trace elements, naturally occurring radioactive material (NORM), volatile organic compounds (VOCs), and hydrocarbons. Ion (charge) balance calculations and percent error of these calculations were included for samples having a complete suite of major ion analyses. Analytical method, reporting level, reporting level type, dilution factor, and supplemental notes were included where available or pertinent. A data dictionary (EMA_PW_Data-Dictionary. xlsx) describes the geochemistry data file and is provided with this data release.