데이터셋 상세
미국
Data Sets for the Report Entitled, "A Field Study of Selected U.S. Geological Survey Analytical Methods for Measuring Pesticides in Filtered Stream Water, June-September 2012"
The National Water-Quality Assessment (NAWQA) Program and National Stream Quality Accounting Network (NASQAN) are U.S. Geological Survey (USGS) monitoring programs that measure pesticide concentrations in the Nation’s streams and rivers, herein collectively referred to as streams. The NAWQA Program began monitoring pesticides in 1992 and the NASQAN Program began monitoring pesticides in 1995. The programs were recently merged to form the USGS National Water Quality Network for Rivers and Streams. Water samples are analyzed for pesticides by the USGS National Water Quality Laboratory (NWQL) using methods developed by the NWQL’s Methods Research and Development team. The NWQL extensively used two analytical methods, gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry, to measure pesticides in filtered water samples during 1992–2012 (old method). In October 2012, the monitoring programs began using direct aqueous-injection liquid chromatography tandem mass spectrometry as a new analytical method for pesticides (new method). The change in analytical methods, however, has the potential to inadvertently introduce bias in analysis of datasets that span the change. The data sets provided in this report were used to document performance of the new method in a variety of stream-water matrices and help quantify potential changes in measurement bias or variability that could be attributed to changes in analytical methods (Martin and others, 2016). Users should consult the report by Martin and others (2016) to understand how these data were collected and used. Measured concentrations and calculated recoveries of 281 pesticides and degradates in paired environmental background water samples and matrix spiked water samples collected at 48 stream-water sites from June 11, 2012 to September 6, 2012 are provided in seven tab-delimited ASCII files with relational database (RDB) format header. A tab-delimited ASCII file (DataDictionaryList.txt) listing DataSet attributes and RDB column formats is also included in this data release. Martin, J.D., Norman, J.E., Sandstrom, M.W., and Rose, C.E., 2016, A field study of selected U.S. Geological Survey analytical methods for measuring pesticides in filtered stream water, June-September 2012: U.S. Geological Survey Scientific Investigations Report, 2017-5049
데이터 정보
연관 데이터
Data Sets for the Report Entitled, "A Field Study of Selected U.S. Geological Survey Analytical Methods for Measuring Pesticides in Filtered Stream Water, June-September 2012"
공공데이터포털
The National Water-Quality Assessment (NAWQA) Program and National Stream Quality Accounting Network (NASQAN) are U.S. Geological Survey (USGS) monitoring programs that measure pesticide concentrations in the Nation’s streams and rivers, herein collectively referred to as streams. The NAWQA Program began monitoring pesticides in 1992 and the NASQAN Program began monitoring pesticides in 1995. The programs were recently merged to form the USGS National Water Quality Network for Rivers and Streams. Water samples are analyzed for pesticides by the USGS National Water Quality Laboratory (NWQL) using methods developed by the NWQL’s Methods Research and Development team. The NWQL extensively used two analytical methods, gas chromatography/mass spectrometry and liquid chromatography/mass spectrometry, to measure pesticides in filtered water samples during 1992–2012 (old method). In October 2012, the monitoring programs began using direct aqueous-injection liquid chromatography tandem mass spectrometry as a new analytical method for pesticides (new method). The change in analytical methods, however, has the potential to inadvertently introduce bias in analysis of datasets that span the change. The data sets provided in this report were used to document performance of the new method in a variety of stream-water matrices and help quantify potential changes in measurement bias or variability that could be attributed to changes in analytical methods (Martin and others, 2016). Users should consult the report by Martin and others (2016) to understand how these data were collected and used. Measured concentrations and calculated recoveries of 281 pesticides and degradates in paired environmental background water samples and matrix spiked water samples collected at 48 stream-water sites from June 11, 2012 to September 6, 2012 are provided in seven tab-delimited ASCII files with relational database (RDB) format header. A tab-delimited ASCII file (DataDictionaryList.txt) listing DataSet attributes and RDB column formats is also included in this data release. Martin, J.D., Norman, J.E., Sandstrom, M.W., and Rose, C.E., 2016, A field study of selected U.S. Geological Survey analytical methods for measuring pesticides in filtered stream water, June-September 2012: U.S. Geological Survey Scientific Investigations Report, 2017-5049
Drainage Basins Used for Assessing Trends in Concentration of Pesticides in Streams of the United States, 1992-2010
공공데이터포털
This dataset consists of drainage basin boundaries for 212 U.S. Geological Survey (USGS) stream sites sampled in the National Water-Quality Assessment (NAWQA) Program, the National Stream Quality Accounting Network (NASQAN), and the National Monitoring Network (NMN). Of the 212 sites, 206 have either a contributing or total drainage basin boundary, and the remaining 6 have both a total drainage basin boundary and a smaller contributing basin boundary. Collectively, these 218 basin boundaries have been used in a geographic information system (GIS) to generate basin characteristics for the assessment of trends in concentrations of pesticides streams of the United States.
Drainage Basins Used for Assessing Trends in Concentration of Pesticides in Streams of the United States, 1992-2010
공공데이터포털
This dataset consists of drainage basin boundaries for 212 U.S. Geological Survey (USGS) stream sites sampled in the National Water-Quality Assessment (NAWQA) Program, the National Stream Quality Accounting Network (NASQAN), and the National Monitoring Network (NMN). Of the 212 sites, 206 have either a contributing or total drainage basin boundary, and the remaining 6 have both a total drainage basin boundary and a smaller contributing basin boundary. Collectively, these 218 basin boundaries have been used in a geographic information system (GIS) to generate basin characteristics for the assessment of trends in concentrations of pesticides streams of the United States.
Datasets for Comparison of Surrogate Models to Estimate Pesticide Concentrations at Six U.S. Geological Survey National Water Quality Network Sites During Water Years 2013–2018
공공데이터포털
This data release is comprised of data tables of input variables for seawaveQ and surrogate models used to predict concentrations of select pesticides at six U.S. Geological Survey National Water Quality Network (NWQN) river sites (Fanno Creek at Durham, Oregon; White River at Hazleton, Indiana; Kansas River at DeSoto, Kansas; Little Arkansas River near Sedgwick, Kansas; Missouri River at Hermann, Missouri; Red River of the North at Grand Forks, North Dakota). Each data table includes discrete concentrations of one select pesticide (Atrazine, Azoxystrobin, Bentazon, Bromacil, Imidacloprid, Simazine, or Triclopyr) at one of the NWQN sites; daily mean streamflow; 30-day and 1-day flow anomalies; daily median values of pH and turbidity; daily mean values of dissolved oxygen, specific conductance, and water temperature; and 30-day and 1-day anomalies for pH, turbidity, dissolved oxygen, specific conductance, and water temperature. Two pesticides were modeled at each site with three types of regression models. Also included is a zip file with outputs from seawaveQ model summary. The processes for retrieving and preparing data for regression models followed those outlined in the SEAWAVE-Q R package documentation (Ryberg and Vecchia, 2013; Ryberg and York, 2020). The R package waterData (Ryberg and Vecchia, 2012) was used to import daily mean values for discharge and either daily mean or daily median values for continuous water-quality constituents directly into R depending on what data were available at each site. Pesticide concentration, streamflow, and surrogate data (continuously measured field parameters) were imported from and are available online from the USGS National Water Information System database (USGS, 2020). The waterData package was used to screen for missing daily mean discharge values (no missing values were found for the sites) and to calculate short-term (1 day) and mid-term (30 day) anomalies for flow and short-term anomalies (1 day) for each water-quality variable. A mid-term streamflow anomaly, for instance, is the deviation of concurrent daily streamflow from average conditions for the previous 30 days (Vecchia and others, 2008). Anomalies were calculated as additional potential model variables. Pesticide concentrations for select constituents from each site were pulled into R using the dataRetrieval package (De Cicco and others, 2018). Three of the six sites (Kansas River at DeSoto, Kansas; Missouri River at Hermann, Missouri; and White River at Hazleton, Indiana) pulled pesticide data for WY 2013–17 whereas the other three sites (Fanno Creek at Durham, Oregon; Little Arkansas River near Sedgwick, Kansas; and Red River of the North at Grand Forks, North Dakota) pulled pesticide data for WY 2013–18. Discrete pesticide data were matched with daily mean discharge and daily mean or median water-quality constituents and the associated calculated short-term (1-day) and mid-term (30-day) anomalies from the date of sampling. Pesticide concentrations were estimated using the SEAWAVE-Q (with surrogates) model using 19 combinations of surrogate variables (table 2 in the associated SIR, "Comparison of Surrogate Models to Estimate Pesticide Concentrations at Six U.S. Geological Survey National Water Quality Network Sites During Water Years 2013–18.") at each of 12 site-pesticide combinations (table 3 in the associated SIR). Three measures of model performance—the generalized coefficient of determination (R2), Akaike’s Information Criteria (AIC), and scale—were included in the output and used to select best-fit models (Table 4 of the associated SIR). The three to four best-fit SEAWAVE-Q (with surrogates) models with sample sizes at least five times the number of variables were selected for each site-pesticide combination based on generalized R2 values—the higher, the better. If generalized R2 values were the same, the model with the lower AIC value was used. The standard surrogate regression and base SEAWAVE-Q models were
Datasets for Comparison of Surrogate Models to Estimate Pesticide Concentrations at Six U.S. Geological Survey National Water Quality Network Sites During Water Years 2013–2018
공공데이터포털
This data release is comprised of data tables of input variables for seawaveQ and surrogate models used to predict concentrations of select pesticides at six U.S. Geological Survey National Water Quality Network (NWQN) river sites (Fanno Creek at Durham, Oregon; White River at Hazleton, Indiana; Kansas River at DeSoto, Kansas; Little Arkansas River near Sedgwick, Kansas; Missouri River at Hermann, Missouri; Red River of the North at Grand Forks, North Dakota). Each data table includes discrete concentrations of one select pesticide (Atrazine, Azoxystrobin, Bentazon, Bromacil, Imidacloprid, Simazine, or Triclopyr) at one of the NWQN sites; daily mean streamflow; 30-day and 1-day flow anomalies; daily median values of pH and turbidity; daily mean values of dissolved oxygen, specific conductance, and water temperature; and 30-day and 1-day anomalies for pH, turbidity, dissolved oxygen, specific conductance, and water temperature. Two pesticides were modeled at each site with three types of regression models. Also included is a zip file with outputs from seawaveQ model summary. The processes for retrieving and preparing data for regression models followed those outlined in the SEAWAVE-Q R package documentation (Ryberg and Vecchia, 2013; Ryberg and York, 2020). The R package waterData (Ryberg and Vecchia, 2012) was used to import daily mean values for discharge and either daily mean or daily median values for continuous water-quality constituents directly into R depending on what data were available at each site. Pesticide concentration, streamflow, and surrogate data (continuously measured field parameters) were imported from and are available online from the USGS National Water Information System database (USGS, 2020). The waterData package was used to screen for missing daily mean discharge values (no missing values were found for the sites) and to calculate short-term (1 day) and mid-term (30 day) anomalies for flow and short-term anomalies (1 day) for each water-quality variable. A mid-term streamflow anomaly, for instance, is the deviation of concurrent daily streamflow from average conditions for the previous 30 days (Vecchia and others, 2008). Anomalies were calculated as additional potential model variables. Pesticide concentrations for select constituents from each site were pulled into R using the dataRetrieval package (De Cicco and others, 2018). Three of the six sites (Kansas River at DeSoto, Kansas; Missouri River at Hermann, Missouri; and White River at Hazleton, Indiana) pulled pesticide data for WY 2013–17 whereas the other three sites (Fanno Creek at Durham, Oregon; Little Arkansas River near Sedgwick, Kansas; and Red River of the North at Grand Forks, North Dakota) pulled pesticide data for WY 2013–18. Discrete pesticide data were matched with daily mean discharge and daily mean or median water-quality constituents and the associated calculated short-term (1-day) and mid-term (30-day) anomalies from the date of sampling. Pesticide concentrations were estimated using the SEAWAVE-Q (with surrogates) model using 19 combinations of surrogate variables (table 2 in the associated SIR, "Comparison of Surrogate Models to Estimate Pesticide Concentrations at Six U.S. Geological Survey National Water Quality Network Sites During Water Years 2013–18.") at each of 12 site-pesticide combinations (table 3 in the associated SIR). Three measures of model performance—the generalized coefficient of determination (R2), Akaike’s Information Criteria (AIC), and scale—were included in the output and used to select best-fit models (Table 4 of the associated SIR). The three to four best-fit SEAWAVE-Q (with surrogates) models with sample sizes at least five times the number of variables were selected for each site-pesticide combination based on generalized R2 values—the higher, the better. If generalized R2 values were the same, the model with the lower AIC value was used. The standard surrogate regression and base SEAWAVE-Q models were
Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 (input)
공공데이터포털
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed to water-quality changes over time in Nation’s streams and rivers. This USGS data release contains all of the input and output files necessary to reproduce the results from the SEAWAVE-Q pesticide models described in the associated U.S. Geological Survey Scientific Investigations Report. Data preparation for input to the model is also fully described in the above mentioned report.
Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 (input)
공공데이터포털
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed to water-quality changes over time in Nation’s streams and rivers. This USGS data release contains all of the input and output files necessary to reproduce the results from the SEAWAVE-Q pesticide models described in the associated U.S. Geological Survey Scientific Investigations Report. Data preparation for input to the model is also fully described in the above mentioned report.
Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 (output)
공공데이터포털
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed to water-quality changes over time in Nation’s streams and rivers. This USGS data release contains all of the input and output files necessary to reproduce the results from the SEAWAVE-Q pesticide models described in the associated U.S. Geological Survey Scientific Investigations Report. Data preparation for input to the model is also fully described in the above mentioned report.
Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 (output)
공공데이터포털
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed to water-quality changes over time in Nation’s streams and rivers. This USGS data release contains all of the input and output files necessary to reproduce the results from the SEAWAVE-Q pesticide models described in the associated U.S. Geological Survey Scientific Investigations Report. Data preparation for input to the model is also fully described in the above mentioned report.
Pesticide concentration and streamflow datasets used to evaluate pesticide trends in the Nation’s rivers and streams, 1992-2012 (output)
공공데이터포털
In 1991, the U.S. Geological Survey (USGS) began a study of more than 50 major river basins across the Nation as part of the National Water-Quality Assessment (NAWQA) project of the National Water-Quality Program. One of the major goals of the NAWQA project is to determine how water-quality conditions change over time. To support that goal, long-term consistent and comparable monitoring has been conducted on streams and rivers throughout the Nation. Outside of the NAWQA project, the USGS also has collected long-term water-quality data to support additional assessments of changing water-quality conditions. These data have been combined to provide insight into how natural features and human activities have contributed to water-quality changes over time in Nation’s streams and rivers. This USGS data release contains all of the input and output files necessary to reproduce the results from the SEAWAVE-Q pesticide models described in the associated U.S. Geological Survey Scientific Investigations Report. Data preparation for input to the model is also fully described in the above mentioned report.