The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Spatial data from field observation points and quantitative plots were used to edit the formation-level maps of Richmond National Battlefield Park to better reflect vegetation classes. Using ArcView 3.3, polygon boundaries were revised onscreen over leaf-off photography. Units used to label polygons on the map (i.e. map classes) are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson Level II classification system. Each polygon on the Richmond National Battlefield Park map was assigned to one of twenty-one map classes based on plot data, field observations, aerial photography signatures, and topographic maps. The mapping boundary was based on park boundary data obtained from Richmond National Battlefield Park in June 2004.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Spatial data from field observation points and quantitative plots were used to edit the formation-level maps of Richmond National Battlefield Park to better reflect vegetation classes. Using ArcView 3.3, polygon boundaries were revised onscreen over leaf-off photography. Units used to label polygons on the map (i.e. map classes) are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson Level II classification system. Each polygon on the Richmond National Battlefield Park map was assigned to one of twenty-one map classes based on plot data, field observations, aerial photography signatures, and topographic maps. The mapping boundary was based on park boundary data obtained from Richmond National Battlefield Park in June 2004.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Spatial data from field observation points and quantitative plots were used to edit the formation-level maps of Petersburg National Battlefield to better reflect vegetation classes. Using ArcView 3.3, polygon boundaries were revised onscreen over leaf-off photography. Units used to label polygons on the map (i.e. map classes) are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson (Anderson et al. 1976) Level II classification system. Each polygon on the Petersburg National Battlefield map was assigned to one of twenty map classes based on plot data, field observations, aerial photography signatures, and topographic maps. The mapping boundary was based on park boundary data obtained from Petersburg National Battlefield in May 2006. Spatial data depicting the locations of earthworks was obtained from the park and used to identify polygons of the cultural map classes Open Earthworks and Forested Earthworks. One map class used to attribute polygons combines two similar associations that, in some circumstances, are difficult to distinguish in the field. The vegetation map was clipped at the park boundary because areas outside the park were not surveyed or included in the accuracy assessment. Twenty map classes were used in the vegetation map for Petersburg National Battlefield. Map classes are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson (Anderson et al. 1976) Level II classification system.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Spatial data from field observation points and quantitative plots were used to edit the formation-level maps of Petersburg National Battlefield to better reflect vegetation classes. Using ArcView 3.3, polygon boundaries were revised onscreen over leaf-off photography. Units used to label polygons on the map (i.e. map classes) are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson (Anderson et al. 1976) Level II classification system. Each polygon on the Petersburg National Battlefield map was assigned to one of twenty map classes based on plot data, field observations, aerial photography signatures, and topographic maps. The mapping boundary was based on park boundary data obtained from Petersburg National Battlefield in May 2006. Spatial data depicting the locations of earthworks was obtained from the park and used to identify polygons of the cultural map classes Open Earthworks and Forested Earthworks. One map class used to attribute polygons combines two similar associations that, in some circumstances, are difficult to distinguish in the field. The vegetation map was clipped at the park boundary because areas outside the park were not surveyed or included in the accuracy assessment. Twenty map classes were used in the vegetation map for Petersburg National Battlefield. Map classes are equivalent to one or more vegetation classes from the regional vegetation classification, or to a land-use class from the Anderson (Anderson et al. 1976) Level II classification system.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation data analysis, the formation-level vegetation map was further edited and refined to develop an association-level vegetation map. Using ArcView 3.2, polygon boundaries were revised onscreen based on the plot data and additional field observations. Each polygon was assigned one of eight vegetation association types based on plot data, field observations, aerial photography signatures, and topographic maps. An aerial photograph interpretation key for the vegetation associations was created. However, several associations could not be distinguished reliably by aerial photography signatures alone. Plot data, field observations, and topographic maps were relied upon in these circumstances to inform the polygon delineation and association name assignments. After the vegetation association map was completed, the thematic accuracy of this map was assessed.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation data analysis, the formation-level vegetation map was further edited and refined to develop an association-level vegetation map. Using ArcView 3.2, polygon boundaries were revised onscreen based on the plot data and additional field observations. Each polygon was assigned one of eight vegetation association types based on plot data, field observations, aerial photography signatures, and topographic maps. An aerial photograph interpretation key for the vegetation associations was created. However, several associations could not be distinguished reliably by aerial photography signatures alone. Plot data, field observations, and topographic maps were relied upon in these circumstances to inform the polygon delineation and association name assignments. After the vegetation association map was completed, the thematic accuracy of this map was assessed.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS (10.6.x) file geodatabase. To map the vegetation and land cover of the parks within the National Capital Region, the region initiated collective mapping efforts at 10 parks (NPS unit codes: ANTI, CATO, CHOH, GWMP, HAFE, MANA, MONO, NACE, PRWI, WOTR). NatureServe assisted with field plots, accuracy assessment, and building the vegetation classification for the vegetation map. This geospatial dataset only covers Antietam National Battlefield.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS (10.6.x) file geodatabase. To map the vegetation and land cover of the parks within the National Capital Region, the region initiated collective mapping efforts at 10 parks (NPS unit codes: ANTI, CATO, CHOH, GWMP, HAFE, MANA, MONO, NACE, PRWI, WOTR). NatureServe assisted with field plots, accuracy assessment, and building the vegetation classification for the vegetation map. This geospatial dataset only covers Antietam National Battlefield.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A geodatabase containing various feature class layers and tables was constructed to show the locations of vegetation types and general land cover (vegetation map), vegetation plot samples, AA sites, project boundary extent, and aerial photographic centers. The feature class layer for the KEMO vegetation map provides 296 polygons of detailed attribute data covering 1419.2 hectares, with an average polygon size of 9.4 hectares. Of the area mapped, 195 polygons (65.9% of all polygons) represent natural/semi-natural vegetation types in the NVCS, encompassing 1,129.1.6 hectares (79.6%) of the total map extent.