In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012a). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and sampled ecological reaches. This dataset comprises of 139 selected environmental characteristics for the 100 sites sampled for the Midwest study.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective (correlations with and effects of stressors), a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region for the watersheds and riparian zones associated with each sampling location. This dataset includes 150 selected environmental characteristics for the 483 sites sampled across all regions of the study. The characteristics were derived over the five years (2013 to 2017) using geospatial summary techniques where spatial information is summarized based on spatial extents such as watersheds. The characteristics were developed using the geospatial data for the location of the water-quality sites, delineations of areas draining to the sites (watershed boundaries, including the boundaries of the lower 5 kilometers [km] of watershed [Lower Basin] for the NESQA and CSQA study regions), and riparian-zone boundaries defined from buffers along digitized riparian reaches (Qi and Nakagaki, 2020). This dataset consists of 3 tables: 1) the main data file containing the environmental characteristics of sites, watersheds (including the boundaries of the lower 5 km of watershed for the NESQA and CSQA study regions), and riparian zones, 2) the data dictionary that describes the variables in the data file, and 3) the full citations associated with the references cited in the data dictionary.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective (correlations with and effects of stressors), a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region for the watersheds and riparian zones associated with each sampling location. This dataset includes 150 selected environmental characteristics for the 483 sites sampled across all regions of the study. The characteristics were derived over the five years (2013 to 2017) using geospatial summary techniques where spatial information is summarized based on spatial extents such as watersheds. The characteristics were developed using the geospatial data for the location of the water-quality sites, delineations of areas draining to the sites (watershed boundaries, including the boundaries of the lower 5 kilometers [km] of watershed [Lower Basin] for the NESQA and CSQA study regions), and riparian-zone boundaries defined from buffers along digitized riparian reaches (Qi and Nakagaki, 2020). This dataset consists of 3 tables: 1) the main data file containing the environmental characteristics of sites, watersheds (including the boundaries of the lower 5 km of watershed for the NESQA and CSQA study regions), and riparian zones, 2) the data dictionary that describes the variables in the data file, and 3) the full citations associated with the references cited in the data dictionary.

In 2013, the Regional Stream Quality Assessment (RSQA) study was started as part of the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) project. One of the objectives of the RSQA is to characterize the relationships between water-quality stressors and stream ecology and subsequently determine the relative effects of these stressors on aquatic biota within the streams (Garrett and others, 2017; Journey and others, 2015; Coles and others, 2019; Sheibley and others, 2017; May and others, 2020). The study was implemented in five regions across the United States (U.S.); the Midwest (MSQA) in 2013, the southeast (SESQA) in 2014, the Pacific Northwest (PNSQA) in 2015, the northeast (NESQA) in 2016, and California (CSQA) in 2017. To meet this objective (correlations with and effects of stressors), a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of each study region for the watersheds and riparian zones associated with each sampling location. This dataset includes 150 selected environmental characteristics for the 483 sites sampled across all regions of the study. The characteristics were derived over the five years (2013 to 2017) using geospatial summary techniques where spatial information is summarized based on spatial extents such as watersheds. The characteristics were developed using the geospatial data for the location of the water-quality sites, delineations of areas draining to the sites (watershed boundaries, including the boundaries of the lower 5 kilometers [km] of watershed [Lower Basin] for the NESQA and CSQA study regions), and riparian-zone boundaries defined from buffers along digitized riparian reaches (Qi and Nakagaki, 2020). This dataset consists of 3 tables: 1) the main data file containing the environmental characteristics of sites, watersheds (including the boundaries of the lower 5 km of watershed for the NESQA and CSQA study regions), and riparian zones, 2) the data dictionary that describes the variables in the data file, and 3) the full citations associated with the references cited in the data dictionary.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the 100 water-chemistry sites sampled for the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the 100 water-chemistry sites sampled for the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset defines the geographic extent of the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset defines the geographic extent of the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012a). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the boundaries for the 100 watersheds studied in the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.

In 2013, the first of several Regional Stream Quality Assessments (RSQA) was done in the Midwest United States. The Midwest Stream Quality Assessment (MSQA) was a collaborative study by the U.S. Geological Survey (USGS) National Water Quality Assessment (NAWQA), the USGS Columbia Environmental Research Center, and the U.S. Environmental Protection Agency (USEPA) National Rivers and Streams Assessment (NRSA). One of the objectives of the RSQA, and thus the MSQA, is to characterize the relationships between water-quality stressors and stream ecology and to determine the relative effects of these stressors on aquatic biota within the streams (U.S. Geological Survey, 2012a). To meet this objective, a framework of fundamental geospatial data was required to develop physical and anthropogenic characteristics of the study region, sampled sites and corresponding watersheds, and riparian zones. This dataset represents the boundaries for the 100 watersheds studied in the MSQA, and is one of the four fundamental geospatial data layers that were developed for the Midwest study.