The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM = River Kilometer, FCS = Fixed Count Station, STH = Steelhead, CC = Coastal Chinook, DS = Downstream

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM = River Kilometer, FCS = Fixed Count Station, STH = Steelhead, CC = Coastal Chinook, DS = Downstream

,

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM = River Kilometer, FCS = Fixed Count Station, STH = Steelhead, CC = Coastal Chinook, DS = Downstream

The California Monitoring Plan (CMP) salmonid monitoring areas and associated population data are part of an ongoing effort to summarize existing and past salmonid monitoring efforts in the areas identified by Adams et al. 2011. These data are compiled and maintained by the California Department of Fish and Wildlife with the cooperation of monitoring practitioners. Updates and associated outreach are intended to occur on an annual basis. Data were created from several sources and existing datasets: some monitoring areas were accurately depicted using the USGS National Hydrography Dataset (NHD), other monitoring areas were approximated using the monitoring point location and the USGS StreamStats tool to depict the watershed area above that point. The areas are intended to represent the approximate extent of sampling within sub-basins, watershed areas, or regions. For example, the spatial extent of monitoring using a fixed count station is approximated by accounting for all anadromous fish habitat upstream of the sampling location. Therefore, the area is approximated by entering the monitoring location coordinates into the StreamStats tool. The resulting shapefile is then examined to ensure the watershed area did not include habitat above dams or barriers to migration. Areas were clipped when needed. The data user should recognize that errors may have occurred during production of this dataset, changes may have occurred to the external sources used post transfer, and for other possible reasons. The population metrics summarized in the associated tabular data may be regarded as spatially limited, temporally limited, and not considered a complete estimate for the population being described. The data user is advised to refer to the annual reports cited in the Source field from the tabular data for additional details regarding monitoring within the area spatially depicted.Abbreviation Definitions: SGS = Spawning Ground Survey, RM = River Mile, RST = Rotary Screw Trap, RKM

Sampling juvenile salmon and associated fishes in open waters of the lower Columbia River estuary. Field work includes bi-weekly sampling during the spring outmigration (Apr-June), and monthly sampling throughout the summer and fall. We use a purse seine to sample open water habitats. Our objectives are to document the seasonal and interannual variation in juvenile salmon immediately prior to ocean entry, with respect to abundance, size, origins (H/W), stocks, food habitats, and parasites/pathogens. We also document the larger estuarine fish community, which serves a critical role as prey for juvenile salmon predators. Abundance and size of fish caught in Columbia estuary.

The California Department of Water Resources (DWR) conducted the Juvenile Salmonid Collection System (JSCS) Pilot Project from 2022 — 2025 to test new methods in fish capture and collect juvenile winter-run Chinook Salmon in the McCloud River (Wintu name: Winnemem Waywaket) as part of the greater effort to assess the feasibility of Chinook Salmon reintroduction above Shasta Dam. The goal of the JSCS Pilot Project was to test the performance of the JSCS structure in the McCloud Arm of Shasta Reservoir and to design, fabricate, and test configurations of the JSCS fish trap. DWR tested initial structural components of the JSCS in Shasta Reservoir in 2022 and operated the complete system at five sites across the reservoir–riverine interface in the McCloud Arm of Shasta Reservoir 2023 — 2024. Based on the results for those years, DWR redesigned the trap (JSCS V2) and deployed it in riverine conditions downstream of the McCloud Bridge Campground between September 30 — December 1, 2025. This dataset summarizes the data collected for the pilot study including environmental data collected on and around the JSCS fish trap, structural performance data for the JSCS fish trap, and fish capture data from the JSCS fish trap.