These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center. Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine reserves, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters (5-30m deep) of Massachusetts between the New Hampshire border and Cape Cod Bay. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports. This spatial dataset is from the Cape Ann and Salisbury Beach Massachusetts project area. They were collected in two separate surveys in 2004 and 2005 and cover approximately 325 square kilometers of the inner continental shelf. High resolution bathymetry and backscatter intensity were collected in 2004 and 2005. Seismic profile data, sediment samples and bottom photography were also collected in 2005.

These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center. Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine reserves, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters (5-30m deep) of Massachusetts between the New Hampshire border and Cape Cod Bay. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports. This spatial dataset is from the Cape Ann and Salisbury Beach Massachusetts project area. They were collected in two separate surveys in 2004 and 2005 and cover approximately 325 square kilometers of the inner continental shelf. High resolution bathymetry and backscatter intensity were collected in 2004 and 2005. Seismic profile data, sediment samples and bottom photography were also collected in 2005.

These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey, Coastal and Marine Geology Program, Woods Hole Science Center. Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine reserves, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters (5-30m deep) of Massachusetts between the New Hampshire border and Cape Cod Bay. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports. This spatial dataset is from the Cape Ann and Salisbury Beach Massachusetts project area. They were collected in two separate surveys in 2004 and 2005 and cover approximately 325 square kilometers of the inner continental shelf. High resolution bathymetry and backscatter intensity were collected in 2004 and 2005. Seismic profile data, sediment samples and bottom photography were also collected in 2005.

These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS), Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center (WHCMSC). Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine resources, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters of coastal Massachusetts, primarily in water depths of 3-30 meters deep. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports (http://woodshole.er.usgs.gov/project-pages/coastal_mass/html/current_map.html). The data collected in the study area located in Northern Cape Cod Bay Massachusetts includes high-resolution geophysics (bathymetry, backscatter intensity, and seismic reflection), and ground validation (sediment samples, video tracklines, and bottom photographs). The data were collected during five separate surveys conducted between 2006 and 2008 and cover 480 square kilometers of the inner continental shelf. More information about the individual USGS surveys conducted as part of the northern Cape Cod Bay project can be found on the Woods Hole Coastal and Marine Science Center Field Activity webpage: 06012: http://quashnet.er.usgs.gov/data/2006/06012/ 07001: http://quashnet.er.usgs.gov/data/2007/07001/ 07002: http://quashnet.er.usgs.gov/data/2007/07002/ 07003: http://quashnet.er.usgs.gov/data/2007/07003/ 08002: http://quashnet.er.usgs.gov/data/2008/08002/

These data were collected under a cooperative agreement with the Massachusetts Office of Coastal Zone Management (CZM) and the U.S. Geological Survey (USGS), Coastal and Marine Geology Program, Woods Hole Coastal and Marine Science Center (WHCMSC). Initiated in 2003, the primary objective of this program is to develop regional geologic framework information for the management of coastal and marine resources. Accurate data and maps of sea-floor geology are important first steps toward protecting fish habitat, delineating marine resources, and assessing environmental changes due to natural or human impacts. The project is focused on the inshore waters of coastal Massachusetts, primarily in water depths of 3-30 meters deep. Data collected for the mapping cooperative have been released in a series of USGS Open-File Reports (http://woodshole.er.usgs.gov/project-pages/coastal_mass/html/current_map.html). The data collected in the study area located in Northern Cape Cod Bay Massachusetts includes high-resolution geophysics (bathymetry, backscatter intensity, and seismic reflection), and ground validation (sediment samples, video tracklines, and bottom photographs). The data were collected during five separate surveys conducted between 2006 and 2008 and cover 480 square kilometers of the inner continental shelf. More information about the individual USGS surveys conducted as part of the northern Cape Cod Bay project can be found on the Woods Hole Coastal and Marine Science Center Field Activity webpage: 06012: http://quashnet.er.usgs.gov/data/2006/06012/ 07001: http://quashnet.er.usgs.gov/data/2007/07001/ 07002: http://quashnet.er.usgs.gov/data/2007/07002/ 07003: http://quashnet.er.usgs.gov/data/2007/07003/ 08002: http://quashnet.er.usgs.gov/data/2008/08002/

This data set includes backscatter intensity of the sea floor offshore of eastern Cape Cod, Massachusetts. The data were collected with a multibeam sea floor mapping system during USGS survey 98015, conducted November 9 - 25, 1998. The surveys were conducted using a Simrad EM 1000 multibeam echo sounder mounted aboard the Canadian Coast Guard vessel Frederick G. Creed. This multibeam system utilizes 60 electronically aimed receive beams spaced at intervals of 2.5 degrees that insonify a strip of sea floor up to 7.5 times the water depth (swath width of 100 to 200 m within the survey area). The horizontal resolution of the beam on the sea floor is approximately 10% of the water depth. Vertical resolution is approximately 1 percent of the water depth. With backscatter intensity, the intensity of the acoustic return from the sea floor from the multibeam system, is a function of the properties of the surficial sediments and of the bottom roughness. Generally, a strong return (light gray tones) is associated with rock or coarse-grained sediment, and a weak return (dark gray tones) with fine-grained sediments. However, the micro-topography, such as ripples, burrows, and benthic populations also affect the reflectivity of the sea floor. Direct observations, using bottom photography or video, and surface samples, are needed to verify interpretations of the backscatter intensity data. The backscatter data have a weak striping that runs parallel to the ship's track. Some of the striping is the result of poor data return at nadir that appears as evenly-spaced thin speckled lines. Some striping is also due to critical angle effects, where the intensity of return varies as a function of the angle of incidence of the incoming sound on the seafloor (Hughes-Clark and others, 1997).

This data set includes backscatter intensity of the sea floor offshore of eastern Cape Cod, Massachusetts. The data were collected with a multibeam sea floor mapping system during USGS survey 98015, conducted November 9 - 25, 1998. The surveys were conducted using a Simrad EM 1000 multibeam echo sounder mounted aboard the Canadian Coast Guard vessel Frederick G. Creed. This multibeam system utilizes 60 electronically aimed receive beams spaced at intervals of 2.5 degrees that insonify a strip of sea floor up to 7.5 times the water depth (swath width of 100 to 200 m within the survey area). The horizontal resolution of the beam on the sea floor is approximately 10% of the water depth. Vertical resolution is approximately 1 percent of the water depth. With backscatter intensity, the intensity of the acoustic return from the sea floor from the multibeam system, is a function of the properties of the surficial sediments and of the bottom roughness. Generally, a strong return (light gray tones) is associated with rock or coarse-grained sediment, and a weak return (dark gray tones) with fine-grained sediments. However, the micro-topography, such as ripples, burrows, and benthic populations also affect the reflectivity of the sea floor. Direct observations, using bottom photography or video, and surface samples, are needed to verify interpretations of the backscatter intensity data. The backscatter data have a weak striping that runs parallel to the ship's track. Some of the striping is the result of poor data return at nadir that appears as evenly-spaced thin speckled lines. Some striping is also due to critical angle effects, where the intensity of return varies as a function of the angle of incidence of the incoming sound on the seafloor (Hughes-Clark and others, 1997).

The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were