Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CGMI contains common calibrated brightness temperatures from the GMI passive microwave instrument flown on the GPM satellite. 1C-R GMI is a remapped version of 1CGMI which is explained at the end of this section. Swath S1 has 9 channels which are similar to TRMM TMI (10V 10H 19V 19H 23V 37V 37H 89V 89H). Swath S2 has 4 channels similar to AMSU-B (166V 166H 183+/-3V 183+/-8V). Data for both swaths is observed in the same revolution of the instrument.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CGMI contains common calibrated brightness temperatures from the GMI passive microwave instrument flown on the GPM satellite. 1C-R GMI is a remapped version of 1CGMI which is explained at the end of this section. Swath S1 has 9 channels which are similar to TRMM TMI (10V 10H 19V 19H 23V 37V 37H 89V 89H). Swath S2 has 4 channels similar to AMSU-B (166V 166H 183+/-3V 183+/-8V). Data for both swaths is observed in the same revolution of the instrument.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CGMI contains common calibrated brightness temperatures from the GMI passive microwave instrument flown on the GPM satellite. 1C-R GMI is a remapped version of 1CGMI which is explained at the end of this section. Swath S1 has 9 channels which are similar to TRMM TMI (10V 10H 19V 19H 23V 37V 37H 89V 89H). Swath S2 has 4 channels similar to AMSU-B (166V 166H 183+/-3V 183+/-8V). Data for both swaths is observed in the same revolution of the instrument.

Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by the current version.This GPM GMI dataset contains "GMI Antenna Temperatures", and is written as a multi-Swath Structure. Swath S1 has channels 1-9: 10V 10H 19V 19H 23V 37V 37H 89V 89H. Swath S2 has channels 10-13: 166V 166H 183+/-3V 183+/-8V. GMIBASERSS is the standard GMI calibration product with full precision of all physical fields. It contains one full orbit plus 200 overlap scans from previous orbit and 200 overlap scans from the post orbit.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CATMS contains common calibrated brightness temperature from the ATMS passive microwave instrument flown on the Suomi NPP satellite and JPSS satellites. ATMS is approximately a combination of the AMSU-A channels and the MHS channels. ATMS rotates 3 scans per 8 seconds. ATMS has the following 22 channels: Ch GHz Pol 1 23.8 QV 2 31.4 QV 3 50.3 QH 4 51.76 QH 5 52.8 QH 6 53.596+-0.115 QH 7 54.4 QH 8 54.94 QH 9 55.5 QH 10 fo = 57.29 QH 11 fo+-0.3222+-0.217 QH 12 fo+-0.3222+-0.048 QH 13 fo+-0.3222+-0.022 QH 14 fo+-0.3222+-0.010 QH 15 fo+-0.3222+-0.0045 QH 16 88.2 QV 17 165.5 QH 18 183.31+-7 QH 19 183.31+-4.5 QH 20 183.31+-3 QH 21 183.31+-1.8 QH 22 183.31+-1 QHQV means quasi-vertical; the polarization vector is parallel to the scan plane at nadir. QH meansquasi-horizontal polarization. Note on geolocation and 1C swaths: The BeamLatitude and BeamLongitude in ATMSBASE have a band dimension of 5. Lat and lon is for channels 1,2,3,16,17. Each 1C swath will contain one band: 1C swath Band IEEE GHz Ch geo Chs in band 1 K 18-26.5 1 1 2 A(Ka) 26.5-40 2 2 3 W 75-110 16 16 4 G 110-300 17 17-22 Note that channels 3-15 are NOT included in the 1C product. 1C ATMS contains 4 swaths, one for each band K, A(Ka), W, and G.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CATMS contains common calibrated brightness temperature from the ATMS passive microwave instrument flown on the Suomi NPP satellite and JPSS satellites. ATMS is approximately a combination of the AMSU-A channels and the MHS channels. ATMS rotates 3 scans per 8 seconds. ATMS has the following 22 channels: Ch GHz Pol 1 23.8 QV 2 31.4 QV 3 50.3 QH 4 51.76 QH 5 52.8 QH 6 53.596+-0.115 QH 7 54.4 QH 8 54.94 QH 9 55.5 QH 10 fo = 57.29 QH 11 fo+-0.3222+-0.217 QH 12 fo+-0.3222+-0.048 QH 13 fo+-0.3222+-0.022 QH 14 fo+-0.3222+-0.010 QH 15 fo+-0.3222+-0.0045 QH 16 88.2 QV 17 165.5 QH 18 183.31+-7 QH 19 183.31+-4.5 QH 20 183.31+-3 QH 21 183.31+-1.8 QH 22 183.31+-1 QH QV means quasi-vertical; the polarization vector is parallel to the scan plane at nadir. QH meansquasi-horizontal polarization. Note on geolocation and 1C swaths: The BeamLatitude and BeamLongitude in ATMSBASE have a band dimension of 5. Lat and lon is for channels 1,2,3,16,17. Each 1C swath will contain one band: 1C swath Band IEEE GHz Ch geo Chs in band 1 K 18-26.5 1 1 2 A(Ka) 26.5-40 2 2 3 W 75-110 16 16 4 G 110-300 17 17-22 Note that channels 3-15 are NOT included in the 1C product. 1C ATMS contains 4 swaths, one for each band K, A(Ka), W, and G.

Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by the current version. This GPM GMI dataset contains "GMI Antenna Temperatures", and is written as a multi-Swath Structure. Swath S1 has channels 1-9: 10V 10H 19V 19H 23V 37V 37H 89V 89H. Swath S2 has channels 10-13: 166V 166H 183+/-3V 183+/-8V. GMIBASERSS is the standard GMI calibration product with full precision of all physical fields. It contains one full orbit plus 200 overlap scans from previous orbit and 200 overlap scans from the post orbit.

Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by the current version.Consistent rainfall retrievals from each instrument mandate the basic sensor radiance measurements (brightness temperature, Tb) to be consistently inter-calibrated.Fundamental to this concept is the existence of the GPM Microwave Imager (GMI), a conically scanning multifrequency radiometer in non-sun-synchronous orbit, which serves as a radiometric transfer standard for the other passive microwave sensors on cooperative (polar orbiting) constellation satellites. This GPM inter-satellite calibration process is known as XCAL. GMIBASEXCAL is the standard GMI calibration product with reduced precision of all physical fields. It consists of one full orbit with no overlaps to other orbits in the production although up to 200 overlap scans may be used for multi-scan calibration in the process. This GPM GMI product contains "GMI Antenna Temperatures", and is written as a multi-Swath Structure. Swath S1 has channels 1-9: 10V 10H 19V 19H 23V 37V 37H 89V 89H. Swath S2 has channels 10-13: 166V 166H 183+/-3V 183+/-8V. S3 S4 are full rotation versions of S1 S2.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CSSMIS contains common calibrated brightness temperature from the SSMIS passive microwave instruments flown on the DMSP satellites. Swath S1 has 3 low frequency channels (19V 19H 22V). Swath S2 has 2 low frequency channels (37V 37H). Swath S3 has 4 high frequency channels (150H 183+/-1H 183+/-3H 183+/-7H). S4 has 2 high frequency channels (91V 91H). All the above frequencies are in GHz. Earth observations for all four swaths are taken during a 144o segment of the instrument rotation when SSMIS scans in the direction of foreward satellite motion. We define the spacecraft vector (v) at the center of this segment.

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.All 1C products have a common L1C data structure, simple and generic. Each L1C swath includes scan time, latitude and longitude, scan status, quality, incidence angle, Sun glint angle, and the intercalibrated brightness temperature (Tc). One or more swaths are included in a product. The radiometer data are recalibrated to a common basis so that precipitation products derived from them are consistent. 1CSSMIS contains common calibrated brightness temperature from the SSMIS passive microwave instruments flown on the DMSP satellites. Swath S1 has 3 low frequency channels (19V 19H 22V). Swath S2 has 2 low frequency channels (37V 37H). Swath S3 has 4 high frequency channels (150H 183+/-1H 183+/-3H 183+/-7H). S4 has 2 high frequency channels (91V 91H). All the above frequencies are in GHz. Earth observations for all four swaths are taken during a 144o segment of the instrument rotation when SSMIS scans in the direction of foreward satellite motion. We define the spacecraft vector (v) at the center of this segment.