The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The De Soto National Memorial vegetation map was made in UTM, NAD 83, zone 17N coordinates with a minimum mapping unit of 400m2. Aerial imagery from January 2007 and LIDAR imagery from 2003 were used for initial polygon development. These polygons were further refined with field data from December 2007 and June 2009. The final vegetation map has a total of 21 mapping classes and 56 polygons.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. In order to accommodate the complex vegetation patterns often found in National Park units and generally maintain a minimum mapping unit of 0.5 ha, a three-tiered scheme was developed for attributing vegetation polygons. Where appropriate, secondary and tertiary vegetation classes are added to describe mixed-plant communities within the polygon. Secondary and tertiary classes were especially useful for describing ecotones, and for polygons with a patchwork of communities below the minimum mapping unit size. Final products included seamless park-wide GIS databases in ArcGIS geodatabase and ArcView shapefile formats of detailed overstory vegetation communities, along with vegetation statistics, hardcopy maps and orthophoto images plotted at large scale corresponding to the park area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. In order to accommodate the complex vegetation patterns often found in National Park units and generally maintain a minimum mapping unit of 0.5 ha, a three-tiered scheme was developed for attributing vegetation polygons. Where appropriate, secondary and tertiary vegetation classes are added to describe mixed-plant communities within the polygon. Secondary and tertiary classes were especially useful for describing ecotones, and for polygons with a patchwork of communities below the minimum mapping unit size. Final products included seamless park-wide GIS databases in ArcGIS geodatabase and ArcView shapefile formats of detailed overstory vegetation communities, along with vegetation statistics, hardcopy maps and orthophoto images plotted at large scale corresponding to the park area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Forty-two polygons were mapped within the project boundary: 27 at the main unit and 15 at the Adamsville proposed expansion area. In total, 15 distinct types were identified across the study area. Seven of these types are Anderson Land Use Classes or variations thereof; the others are natural vegetation classes following the NVCS. Map classes were described at the alliance or association level; where known, alliance descriptions also include recognized associations. Due to the small area involved in this project, and to its relatively simple floristic attributes, there is a one-to-one correspondence between the map classes presented here and the community types described. A total of 35 species were recorded during the sampling efforts. Alliances and associations marked with (P) are proposed, not yet accepted into the NVC. In addition, summarized local descriptions, with example satellite image/signatures and representative photos for each alliance or association, follow this section.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Forty-two polygons were mapped within the project boundary: 27 at the main unit and 15 at the Adamsville proposed expansion area. In total, 15 distinct types were identified across the study area. Seven of these types are Anderson Land Use Classes or variations thereof; the others are natural vegetation classes following the NVCS. Map classes were described at the alliance or association level; where known, alliance descriptions also include recognized associations. Due to the small area involved in this project, and to its relatively simple floristic attributes, there is a one-to-one correspondence between the map classes presented here and the community types described. A total of 35 species were recorded during the sampling efforts. Alliances and associations marked with (P) are proposed, not yet accepted into the NVC. In addition, summarized local descriptions, with example satellite image/signatures and representative photos for each alliance or association, follow this section.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Just over 698 acres, including 214 acres in the authorized boundary of HOME and an additional 484 acres in the environs, were mapped using ten map classes (Figure 5). This included four land cover classes and six vegetation classes. Of all the map units, the most frequent was Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest with 21 polygons. Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest was also the most abundant map unit in terms of area other than cropfields in the environs, covering 219 acres (89 hectares) or about 13% of the project area. All of the frequencies for each map unit (i.e., number of polygons) along with acreage per map unit are listed in Table 3. Normally the standard minimum mapping unit for NPS vegetation mapping projects is defined as 0.5 hectare. However this is a nominal unit and due to the small size of HOME and the resolution of the imagery it was reduced to allow for more detail in the mapping. Therefore, 13 of the total 60 polygons were under 0.5 hectare. The average area of polygons for this project was 28.8 acres (11.6 hectares).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Just over 698 acres, including 214 acres in the authorized boundary of HOME and an additional 484 acres in the environs, were mapped using ten map classes (Figure 5). This included four land cover classes and six vegetation classes. Of all the map units, the most frequent was Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest with 21 polygons. Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest was also the most abundant map unit in terms of area other than cropfields in the environs, covering 219 acres (89 hectares) or about 13% of the project area. All of the frequencies for each map unit (i.e., number of polygons) along with acreage per map unit are listed in Table 3. Normally the standard minimum mapping unit for NPS vegetation mapping projects is defined as 0.5 hectare. However this is a nominal unit and due to the small size of HOME and the resolution of the imagery it was reduced to allow for more detail in the mapping. Therefore, 13 of the total 60 polygons were under 0.5 hectare. The average area of polygons for this project was 28.8 acres (11.6 hectares).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The map was designed to facilitate ecologically- based natural resources management at a 1:24,000 scale with 0.5-ha minimum map unit size. Based on a provisional assessment, overall accuracy was 82.5% for Level 1 and 66.8% for Level 2. Level 1 units will likely be sufficient and most appropriate for many natural resource planning and evaluations, while Level 2 units provide added fine-scale information within major ecological groups. To support the map as a management tool, we provide an annotated map legend along with descriptions of each plant association, a corresponding diagnostic key, field forms, and a plant species list. The map was delivered in both printed form and as digital Geographic Information System (GIS) map files. The GIS format allows flexibility to update the map as new information becomes available, or as major vegetation changes, such as fire, disease or other impacts, occur in the park.