The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. To produce the digital map, a combination of 1:12,000-scale ortho imagery acquired in 2003, 2004, and 2005 and all of the GPS-referenced ground data were used to interpret the complex patterns of vegetation and land-use. All imagery was acquired from the U.S. Department of Agriculture - Farm Service Agency’s Aerial Photography Field Office and the National Agriculture Imagery Program. In the end, 32 map units (13 vegetated and 19 land-use) were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcGIS© software. Draft maps were printed, field tested, reviewed, and revised. One hundred-twenty four accuracy assessment (AA) data points were collected in 2006 and used to determine the map’s accuracy. After final revisions, the accuracy assessment revealed an overall thematic accuracy of 89%. Project Size = 6,784 acres San Antonio Missions National Historical Park = 844 acres Map Classes = 32 13 Vegetated 19 Non-vegetated Minimum Mapping Unit = ½ hectare is the program standard but this was modified at SAAN to ¼ acre. Total Size = 1,122 Polygons Average Polygon Size = 6 acres Overall Thematic Accuracy = 89%

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Prior to conducting field visits, existing vegetation maps, soils maps, wetland locations, and 2007 NAIP 6-inch color orthophotos, provided by the NPS, were used to delineate preliminary polygons using ArcGIS™ 9.3.1. Each polygon was assigned a "GIS_Poly" code. Some areas were difficult to map without field verification. A total of 544 polygons were mapped in the park. Vegetation classified at the Alliance-level was mapped correctly with an overall accuracy of 82.0 ± 5.2% (90% confidence intervals) and increases at higher NVC levels to 86.8%± 4.6% at the Division-level. Twenty-three of 32 Alliances in the AA (72%) meet the user‘s accuracy requirement of 80% established by the National Park Service Vegetation Inventory Program.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Prior to conducting field visits, existing vegetation maps, soils maps, wetland locations, and 2007 NAIP 6-inch color orthophotos, provided by the NPS, were used to delineate preliminary polygons using ArcGIS™ 9.3.1. Each polygon was assigned a "GIS_Poly" code. Some areas were difficult to map without field verification. A total of 544 polygons were mapped in the park. Vegetation classified at the Alliance-level was mapped correctly with an overall accuracy of 82.0 ± 5.2% (90% confidence intervals) and increases at higher NVC levels to 86.8%± 4.6% at the Division-level. Twenty-three of 32 Alliances in the AA (72%) meet the user‘s accuracy requirement of 80% established by the National Park Service Vegetation Inventory Program.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A final vegetation map for Castillo de San Marcos National Monument was created to represent the vegetation occurring within the park during 2012. This product is the final of four steps necessary to produce an accurate vegetation map based upon aerial photographs. This includes the determination of the community element global (CEGL) codes (2008) and acquisition of aerial imagery (2012), using the aerial imagery, with five ground truthing points (2014), to create a draft vegetation map, performing an accuracy assessment (2015), and then using all the available information to create a final vegetation map (2018).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. A final vegetation map for Castillo de San Marcos National Monument was created to represent the vegetation occurring within the park during 2012. This product is the final of four steps necessary to produce an accurate vegetation map based upon aerial photographs. This includes the determination of the community element global (CEGL) codes (2008) and acquisition of aerial imagery (2012), using the aerial imagery, with five ground truthing points (2014), to create a draft vegetation map, performing an accuracy assessment (2015), and then using all the available information to create a final vegetation map (2018).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Aerial digital ortho-photography was the foundation imagery for map development. For Abó, the photography was acquired on April May 15, 2002 at a scale of approximately 1:3,000; for Quarai and Gran Quivira it was flown on April 2, 2003 at scales of 1:3,600 and 1:3000, respectively. The 2002-03 digital imagery has a base pixel resolution of 1.0 m. We also made use of statewide 1-meter resolution, true-color imagery from 2005 that became available in 2006 through the New Mexico Resource Geographic Information System. A 10 m spatial resolution USGS Digital Elevation Model (DEM) was used, in conjunction with ground data, to help discriminate between vegetation types based on elevation gradients and terrain. All imagery and other spatial data layers were compiled into a geodatabase and GIS using ArcGIS 9.3 (ESRI 2008).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Aerial digital ortho-photography was the foundation imagery for map development. For Abó, the photography was acquired on April May 15, 2002 at a scale of approximately 1:3,000; for Quarai and Gran Quivira it was flown on April 2, 2003 at scales of 1:3,600 and 1:3000, respectively. The 2002-03 digital imagery has a base pixel resolution of 1.0 m. We also made use of statewide 1-meter resolution, true-color imagery from 2005 that became available in 2006 through the New Mexico Resource Geographic Information System. A 10 m spatial resolution USGS Digital Elevation Model (DEM) was used, in conjunction with ground data, to help discriminate between vegetation types based on elevation gradients and terrain. All imagery and other spatial data layers were compiled into a geodatabase and GIS using ArcGIS 9.3 (ESRI 2008).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.