데이터셋 상세
미국
Location of vibracores from offshore of Dare County, North Carolina (ncd cores.shp, geographic, WGS 84)
The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were
데이터 정보
연관 데이터
Location of vibracores from offshore of Dare County, North Carolina (ncd cores.shp, geographic, WGS 84)
공공데이터포털
The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were
Location of MMS (Minerals Management Service) vibracores from offshore northern Dare County, North Carolina (mms cores.shp, geographic, WGS 84)
공공데이터포털
The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were
Location of SNL vibracores collected on Debris Barge (D/B) Snell from offshore northern Dare and Hyde Counties, North Carolina (snl cores.shp, geographic, WGS 84)
공공데이터포털
The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were
Location of vibracores collected from nearshore off of Duck, North Carolina in 2005 (vims cores.shp, geographic, WGS 84)
공공데이터포털
The northeastern North Carolina coastal system, from False Cape, Virginia, to Cape Lookout, North Carolina, has been studied by a cooperative research program that mapped the Quaternary geologic framework of the estuaries, barrier islands, and inner continental shelf. This information provides a basis to understand the linkage between geologic framework, physical processes, and coastal evolution at time scales from storm events to millennia. The study area attracts significant tourism to its parks and beaches, contains a number of coastal communities, and supports a local fishing industry, all of which are impacted by coastal change. Knowledge derived from this research program can be used to mitigate hazards and facilitate effective management of this dynamic coastal system. This regional mapping project produced spatial datasets of high-resolution geophysical (bathymetry, backscatter intensity, and seismic reflection) and sedimentary (core and grab-sample) data. The high-resolution geophysical data were collected during numerous surveys within the back-barrier estuarine system, along the barrier island complex, in the nearshore, and along the inner continental shelf. Sediment cores were taken on the mainland and along the barrier islands, and both cores and grab samples were taken on the inner shelf. Data collection was a collaborative effort between the U.S. Geological Survey (USGS) and several other institutions including East Carolina University (ECU), the North Carolina Geological Survey, and the Virginia Institute of Marine Science (VIMS). The high-resolution geophysical data of the inner continental shelf were collected during six separate surveys conducted between 1999 and 2004 (four USGS surveys north of Cape Hatteras: 1999-045-FA, 2001-005-FA, 2002-012-FA, 2002-013-FA, and two USGS surveys south of Cape Hatteras: 2003-003-FA and 2004-003-FA) and cover more than 2600 square kilometers of the inner shelf. Single-beam bathymetry data were collected north of Cape Hatteras in 1999 using a Furuno fathometer. Swath bathymetry data were collected on all other inner shelf surveys using a SEA, Ltd. SwathPLUS 234-kHz bathymetric sonar. Chirp seismic data as well as sidescan-sonar data were collected with a Teledyne Benthos (Datasonics) SIS-1000 north of Cape Hatteras along with boomer seismic reflection data (cruises 1999-045-FA, 2001-005-FA, 2002-012-FA and 2002-013-FA). An Edgetech 512i was used to collect chirp seismic data south of Cape Hatteras (cruises 2003-003-FA and 2004-003-FA) along with a Klein 3000 sidescan-sonar system. Sediment samples were collected with a Van Veen grab sampler during four of the USGS surveys (1999-045-FA, 2001-005-FA, 2002-013-FA, and 2004-003-FA). Additional sediment core data along the inner shelf are provided from previously published studies. A cooperative study, between the North Carolina Geological Survey and the Minerals Management Service (MMS cores), collected vibracores along the inner continental shelf offshore of Nags Head, Kill Devils Hills and Kitty Hawk, North Carolina in 1996. The U.S. Army Corps of Engineers collected vibracores along the inner shelf offshore of Dare County in August 1995 (NDC cores) and July-August 1995 (SNL cores). These cores are curated by the North Carolina Geological Survey and were used as part of the ground validation process in this study. Nearshore geophysical and core data were collected by the Virginia Institute of Marine Science. The nearshore is defined here as the region between the 10-m isobath and the shoreline. High-resolution bathymetry, backscatter intensity, and chirp seismic data were collected between June 2002 and May 2004. Vibracore samples were collected in May and July 2005. Shallow subsurface geophysical data were acquired along the Outer Banks barrier islands using a ground-penetrating radar (GPR) system. Data were collected by East Carolina University from 2002 to 2005. Rotasonic cores (OBX cores) from five drilling operations were
Location and analysis information of vibracores collected by the U.S. Geological Survey within Apalachicola Bay, Florida, 2007 (APP-07 CoreLocations, points)
공공데이터포털
In 2007, the U.S. Geological Survey collected 24 vibracores within Apalachicola Bay, Florida. The vibracores were collected using a Rossfelder percussive (P-3) electric vibracore system during a cruise on the R/V Gilbert. Selection of the core sites was based on a geophysical survey that was conducted during 2005 and 2006 in collaboration with the National Oceanic and Atmospheric Administration’s (NOAA) Coastal Services Center (CSC) and the Apalachicola Bay National Estuarine Research Reserve. Available data include the vibracore data logs and photographs, select seismic-reflection profiles (from the geophysical survey), and core-derived data including: grain size analyses, radiocarbon ages, microfossil counts, and sedimentological interpretations. The long-term goal of this study is to provide maps, data, and assistance to the Apalachicola Bay National Estuarine Research Reserve in their effort to monitor and understand the geology and ecology of Apalachicola Bay Estuary. These data will inform coastal managers charged with resource preservation.
Location data for vibracores collected during a Monterey Bay Aquarium Research Institute cruise in November 2019 offshore of south-central California (USGS FAN 2019-667-FA)
공공데이터포털
This dataset includes the location information for 49 vibracores that were collected by the Monterey Bay Aquarium Research Institute (MBARI) in November 2019 aboard the R/V Western Flyer using the remotely operated vehicle (ROV) Doc Ricketts. The collection of these cores was funded entirely by MBARI, and the cores have been donated to the U.S. Geological Survey (USGS). The cores were collected in collaboration with the USGS and the Bureau of Ocean Energy Management (BOEM) and are located in the same study area as the collaborative California Deepwater Investigations and Groundtruthing (Cal DIG I) project. The purpose of the overall Cal DIG I study is to assess shallow geohazards, benthic habitats, and thereby the potential for alternative energy infrastructure (namely floating wind turbines) offshore south-central California due to the study area's proximity to power grid infrastructure associated with the Morro Bay power plant. These data provide information about the geology of the seafloor and shallow subsurface offshore of the south-central California coast.
Coordinates of vibracores collected offshore central California, during field activity 2019-651-FA (ver 2.0, August 2023)
공공데이터포털
This dataset includes coordinate information for sediment cores collected offshore central California in the vicinity of Morro Bay. These data were collected aboard the M/V Bold Horizon in October 2019 for use in regional hazard assessments relating to the Hosgri Fault.
Vibracore locations collected in 2014 from Barnegat Bay, New Jersey
공공데이터포털
In response to the 2010 Governor’s Action Plan to clean up the Barnegat Bay–Little Egg Harbor (BBLEH) estuary in New Jersey, the U.S. Geological Survey (USGS) partnered with the New Jersey Department of Environmental Protection in 2011 to begin a multidisciplinary research project to understand the physical controls on water quality in the bay. Between 2011 and 2013, USGS scientists mapped the geological and morphological characteristics of the seafloor of the BBLEH estuary using a suite of geophysical tools. However, this mapping effort included only surficial characterization of bay sediments; to verify the sub-surface geophysical data, sediment cores were required. Data Series 985 associated with this metadata record serves as an archive of sedimentologic data from 18 vibracores collected from Barnegat Bay between May and August of 2014 by the U.S. Department of Agriculture Natural Resources Conservation Service (NRCS) on behalf of the USGS. The vibracores were collected in conjunction with an ongoing NRCS subaqueous soil survey for the BBLEH estuary. The data presented in this report, including descriptive core logs, core photographs, processed grain-size data, and Geographic Information System (GIS) data files with accompanying formal Federal Geographic Data Committee metadata, can be viewed or downloaded from https://pubs.usgs.gov/ds/0985/ds985_data/.
Vibracore locations collected in 2014 from Barnegat Bay, New Jersey
공공데이터포털
In response to the 2010 Governor’s Action Plan to clean up the Barnegat Bay–Little Egg Harbor (BBLEH) estuary in New Jersey, the U.S. Geological Survey (USGS) partnered with the New Jersey Department of Environmental Protection in 2011 to begin a multidisciplinary research project to understand the physical controls on water quality in the bay. Between 2011 and 2013, USGS scientists mapped the geological and morphological characteristics of the seafloor of the BBLEH estuary using a suite of geophysical tools. However, this mapping effort included only surficial characterization of bay sediments; to verify the sub-surface geophysical data, sediment cores were required. Data Series 985 associated with this metadata record serves as an archive of sedimentologic data from 18 vibracores collected from Barnegat Bay between May and August of 2014 by the U.S. Department of Agriculture Natural Resources Conservation Service (NRCS) on behalf of the USGS. The vibracores were collected in conjunction with an ongoing NRCS subaqueous soil survey for the BBLEH estuary. The data presented in this report, including descriptive core logs, core photographs, processed grain-size data, and Geographic Information System (GIS) data files with accompanying formal Federal Geographic Data Committee metadata, can be viewed or downloaded from https://pubs.usgs.gov/ds/0985/ds985_data/.
Location and depth data for vibracores collected during a Monterey Bay Aquarium Research Institute cruise in February 2019 offshore of south-central California (USGS FAN 2019-603-FA)
공공데이터포털
This dataset includes the location and depth information for 49 vibracores that were collected by the Monterey Bay Aquarium Research Institute (MBARI) in February 2019 aboard the R/V Western Flyer using the remotely operated vehicle (ROV) Doc Ricketts. The collection of these cores was funded entirely by MBARI, and the cores have been donated to the U.S. Geological Survey (USGS). The cores were collected in collaboration with the USGS and the Bureau of Ocean Energy Management (BOEM) and are located in the same study area as the collaborative California Deepwater Investigations and Groundtruthing (Cal DIG I) project. The purpose of the overall Cal DIG I study is to assess shallow geohazards, benthic habitats, and thereby the potential for alternative energy infrastructure (namely floating wind turbines) offshore south-central California due to the study area's proximity to power grid infrastructure associated with the Morro Bay power plant. These data provide information about the geology of the seafloor and shallow subsurface offshore of the south-central California coast.