Continuous water-temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water-temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for ESA-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Temperature monitoring for this study spans 2019 through 2022. Water-temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Collins Bay monitoring site between 06/27/2019 and 10/21/2020. The monitoring site is within an alcove perennially connected to the Willamette River and includes one monitoring array consisting of two water-temperature loggers suspended in the water column from 06/27/2019 to 07/30/2020 and then one-logger from 07/30/2020 to 10/21/2020.

Continuous water-temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water-temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for ESA-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Temperature monitoring for this study spans 2019 through 2022. Water-temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Confluence Preserve Mile Long pond monitoring site between 06/27/2019 and 03/22/2021. The monitoring site is within a former gravel pit adjacent to the Middle Fork Willamette River and includes two monitoring arrays consisting of three water-temperature loggers suspended in the water column from 06/27/2019 to 08/06/2020 and one monitoring array with one logger from 11/09/2020 to 03/22/2021.

Continuous water-temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water-temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for ESA-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Temperature monitoring for this study spans 2019 through 2022. Water-temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Confluence Preserve Mile Long pond monitoring site between 06/27/2019 and 03/22/2021. The monitoring site is within a former gravel pit adjacent to the Middle Fork Willamette River and includes two monitoring arrays consisting of three water-temperature loggers suspended in the water column from 06/27/2019 to 08/06/2020 and one monitoring array with one logger from 11/09/2020 to 03/22/2021.

Continuous water-temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water-temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for ESA-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Temperature monitoring for this study spans 2019 through 2022. Water-temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Confluence Preserve Mile Long pond monitoring site between 06/27/2019 and 03/22/2021. The monitoring site is within a former gravel pit adjacent to the Middle Fork Willamette River and includes two monitoring arrays consisting of three water-temperature loggers suspended in the water column from 06/27/2019 to 08/06/2020 and one monitoring array with one logger from 11/09/2020 to 03/22/2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Mission State Park monitoring site between 09/22/2020 and 10/18/2021 and associated data quality files. The monitoring sites are within Mission Lake, a lake not connected to the Willamette River year-round, and Windsor Slough, an alcove along the Willamette River which flows around Windsor Island. These sites contain various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. One monitoring array consisting of one water temperature logger was deployed from 09/22/2020 to 10/18/2021 at the Mission Lake monitoring site. Two monitoring arrays consisting of one water temperature loggers per array were deployed from 09/22/2020 to 04/20/2021 at the Windsor Slough monitoring site. The two arrays at Windsor Slough were replaced by one monitoring array consisting of two water temperature loggers from 04/20/2021 to 10/18/2021. These data and metadata have been added to the data release originally published in 2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Mission State Park monitoring site between 09/22/2020 and 10/18/2021 and associated data quality files. The monitoring sites are within Mission Lake, a lake not connected to the Willamette River year-round, and Windsor Slough, an alcove along the Willamette River which flows around Windsor Island. These sites contain various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. One monitoring array consisting of one water temperature logger was deployed from 09/22/2020 to 10/18/2021 at the Mission Lake monitoring site. Two monitoring arrays consisting of one water temperature loggers per array were deployed from 09/22/2020 to 04/20/2021 at the Windsor Slough monitoring site. The two arrays at Windsor Slough were replaced by one monitoring array consisting of two water temperature loggers from 04/20/2021 to 10/18/2021. These data and metadata have been added to the data release originally published in 2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Bowers Rock State Park monitoring site between 08/14/2020 and 10/19/2021 and associated data quality files. The monitoring site is within a former gravel pit adjacent to the Willamette River and included various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 08/14/2020 to 04/15/2021, one in the southeast area of the pond and one in the northeast area of the pond. One monitoring array consisting of two water temperature loggers in the southeast area of the pond and one monitoring array consisting of one water temperature loggers in the northeast area of the pond were deployed from 04/15/2021 to 07/19/2021. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 07/19/2021 to 10/19/2021, one in the southeast area of the pond and one in the northeast area of the pond. These data and metadata have been added to the data release originally published in 2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Bowers Rock State Park monitoring site between 08/14/2020 and 10/19/2021 and associated data quality files. The monitoring site is within a former gravel pit adjacent to the Willamette River and included various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 08/14/2020 to 04/15/2021, one in the southeast area of the pond and one in the northeast area of the pond. One monitoring array consisting of two water temperature loggers in the southeast area of the pond and one monitoring array consisting of one water temperature loggers in the northeast area of the pond were deployed from 04/15/2021 to 07/19/2021. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 07/19/2021 to 10/19/2021, one in the southeast area of the pond and one in the northeast area of the pond. These data and metadata have been added to the data release originally published in 2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Bowers Rock State Park monitoring site between 08/14/2020 and 10/19/2021 and associated data quality files. The monitoring site is within a former gravel pit adjacent to the Willamette River and included various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 08/14/2020 to 04/15/2021, one in the southeast area of the pond and one in the northeast area of the pond. One monitoring array consisting of two water temperature loggers in the southeast area of the pond and one monitoring array consisting of one water temperature loggers in the northeast area of the pond were deployed from 04/15/2021 to 07/19/2021. Two monitoring arrays consisting of two water temperature loggers per array were deployed from 07/19/2021 to 10/19/2021, one in the southeast area of the pond and one in the northeast area of the pond. These data and metadata have been added to the data release originally published in 2021.

Continuous water temperature data were collected at multiple sites along the Middle Fork and mainstem Willamette Rivers between Jasper and Newberg, Oregon, to support effectiveness monitoring for a large-scale channel and floodplain restoration program (Willamette Focused Investment Partnership, WFIP). Continuous water temperature loggers were deployed at a subset of WFIP restoration sites where river restoration activities were implemented to improve habitat conditions for native fish species. Data from water temperature monitoring will be used to evaluate the effectiveness of restoration activities at improving habitat conditions for Endangered Species Act (ESA)-listed salmonids and other native fish in the Willamette River. Additionally, water temperature monitoring in summer and early fall months at restoration sites is useful for determining whether thermal conditions at these sites are optimal, sub-optimal, or lethal for cold-water adapted fish species like spring Chinook salmon (Oncorhynchus tshawytscha). Water temperature monitoring for this study spans 2019 through 2022. Water temperature loggers were suspended in the water column on a wire between a concrete block and a buoy as part of a monitoring arrays installed at multiple off-channel location throughout the study area. This document describes data collected at the Willamette Mission State Park monitoring site between 09/22/2020 and 10/18/2021 and associated data quality files. The monitoring sites are within Mission Lake, a lake not connected to the Willamette River year-round, and Windsor Slough, an alcove along the Willamette River which flows around Windsor Island. These sites contain various configurations of monitoring arrays consisting of water temperature loggers suspended at different elevations in the water column. One monitoring array consisting of one water temperature logger was deployed from 09/22/2020 to 10/18/2021 at the Mission Lake monitoring site. Two monitoring arrays consisting of one water temperature loggers per array were deployed from 09/22/2020 to 04/20/2021 at the Windsor Slough monitoring site. The two arrays at Windsor Slough were replaced by one monitoring array consisting of two water temperature loggers from 04/20/2021 to 10/18/2021. These data and metadata have been added to the data release originally published in 2021.