To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 12 towboard surveys (28.9725 km in length), were conducted at Jarvis Island during the Pacific Remote Island Areas RAMP Cruise HI0803 from 21 March - 12 April 2008. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 4 towboard surveys (10.9002 km in length), were conducted at Jarvis Island during the Pacific Remote Island Areas RAMP Cruise TC0201LegIII from 4 March - 25 March 2002. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 4 towboard surveys (10.9587 km in length), were conducted at Jarvis Island during the Pacific Remote Island Areas RAMP Cruise TC0101 from 30 January - 28 February 2001. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of the Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 9 towboard surveys (19.26 km in length), were conducted at Jarvis during the Pacific Remote Island Areas RAMP Cruise HA1201 from 20120427 to 20120524. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., Crown of Thorns sea stars, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15 m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (greater than 50 cm total length) seen within 5 m either side and 10 m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15-second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5-second intervals. Latitude and longitude of each survey track is recorded at 5-second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 10 towboard surveys (16.99 km in length), were conducted at Jarvis during the Pacific Remote Island Areas RAMP Cruise HA1001 from 2010-01-21 to 2010-04-24. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., Crown of Thorns sea stars, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15 m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (greater than 50 cm total length) seen within 5 m either side and 10 m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15-second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5-second intervals. Latitude and longitude of each survey track is recorded at 5-second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 27 towboard surveys (51.4376 km in length), were conducted at Johnston Atoll during the Pacific Remote Island Areas RAMP Cruise HI0601 from 15 January - 6 February 2006. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 19 towboard surveys (36.3596 km in length), were conducted at Wake Island during the Pacific Remote Island Areas RAMP Cruise OES0513 from 12 October - 30 October 2005. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 10 towboard surveys (16.9817 km in length), were conducted at Johnston Atoll during the Pacific Remote Island Areas RAMP Cruise HI0801 from 24 January - 14 February 2008. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of the Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 17 towboard surveys (33.94 km in length), were conducted at Johnston during the Pacific Remote Island Areas RAMP Cruise HA1201 from 20120227 to 20120325. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., Crown of Thorns sea stars, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15 m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (greater than 50 cm total length) seen within 5 m either side and 10 m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15-second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5-second intervals. Latitude and longitude of each survey track is recorded at 5-second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 19 towboard surveys (46.2630 km in length), were conducted at Wake Island during the Pacific Remote Island Areas RAMP Cruise HI0701 from 19 April - 9 May 2007. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.