This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at Utah FORGE project by the University of Oklahoma, presented by Dr. Ahmad Ghassemi, McCasland Chair Professor. The project's objective was to develop a methodology for the determination of reservoir-scale in-situ stress and use it to estimate the stress state at Utah FORGE. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video discusses how magnitude and orientation of natural in-situ principal stresses at depth is necessary for effective and economical geothermal reservoir development including drilling, stimulation, and reservoir management. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.

This is a presentation on the Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at FORGE by the University of Oklahoma, presented by Ahmad Ghassemi. This video discusses how magnitude and orientation of natural in-situ principal stresses at depth is necessary for effective and economical geothermal reservoir development including drilling, stimulation, and reservoir management. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.

This final report summarizes the work done on Utah FORGE project 2-2404. The project aimed to develop a methodology integrating alternative well bore and core-based methods and reservoir-scale focal mechanisms (FM) to better estimate the reservoir stress at FORGE. The project objectives were to apply anelastic strain recovery, differential strain curve analysis, fracture mechanics analysis of drilling-induced cracks and combined them with other wellbore-based sources of stress data available from FORGE (DFIT, flowback, image logs of injection intervals, injection pressure record) to better estimate the near- wellbore stress distribution. Then, the resulting stress field would be inverted together with the reservoir-scale in-situ stress data obtained from a novel interpretation of focal mechanisms to characterize the stress and pore pressure distribution within the reservoir. Integrating these multiple sources of stress data would yield a more reliable estimate of the stress state at the km-scale for use in different FORGE reservoir development activities. The developed methodology can readily be applied to future EGS projects.

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the Utah FORGE Site: Laboratory Modelling and Field Measurements project by The University of Pittsburgh, presented by Andrew Bunger. The project characterizes the stress in the Utah FORGE EGS reservoir using three methods: Method 1: Demonstrate complimentary laboratory rock-core stress estimation combined with Machine Learning approach for measuring in-situ stress from field sonic log data; Method 2: Complete field based in-situ measurement (mini-frac); and Method 3: Develop a mechanics-based method for connection near wellbore stress measurements to stresses away from the well-bore. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 14, 2024.

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the Utah FORGE Site: Laboratory Modelling and Field Measurements project by The University of Pittsburgh, presented by Andrew Bunger. The project characterizes the stress in the Utah FORGE EGS reservoir using three methods: Method 1: Demonstrate complimentary laboratory rock-core stress estimation combined with Machine Learning approach for measuring in-situ stress from field sonic log data; Method 2: Complete field based in-situ measurement (mini-frac); and Method 3: Develop a mechanics-based method for connection near wellbore stress measurements to stresses away from the well-bore. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 14, 2024.

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by University of Pittsburgh, presented by Dr. Andrew Bunger. The project's objective was to characterize stress in the Utah FORGE EGS reservoir using three methods: a laboratory rock-core stress estimation combined with a Machine Learning approach for estimation of in-situ stress from field sonic-log data, a field based in-situ measurement (min-frac) approach, and a modeling approach. This presentation was featured at the Utah FORGE R&D Annual Workshop on September 8, 2025. The workshop offered a valuable opportunity to review the progress of Research and Development projects funded under Solicitation 2020-1, which aim to improve our understanding of the key factors influencing Enhanced Geothermal System (EGS) reservoir and resource development.

This PowerPoint summarizes the integration of multiple approaches and data to constrain wellbore stress models at Utah FORGE. This stress determination used faulting theory, breakouts, and drilling-induced cracks detected in image logs. Wellbore stress profiles were established for the four deep Utah FORGE wells: three vertical wells (78B-32, 56-32, 58-32), and one deviated well (16A(78)-32). This presentation is part of Utah FORGE project 2-2404: "Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at Utah FORGE." Dr. Ahmad Ghassemi at the University of Oklahoma is the project PI.

This PowerPoint summarizes the integration of multiple approaches and data to constrain wellbore stress models at Utah FORGE. This stress determination used faulting theory, breakouts, and drilling-induced cracks detected in image logs. Wellbore stress profiles were established for the four deep Utah FORGE wells: three vertical wells (78B-32, 56-32, 58-32), and one deviated well (16A(78)-32). This presentation is part of Utah FORGE project 2-2404: "Application of Advanced Techniques for Determination of Reservoir-Scale Stress State at Utah FORGE." Dr. Ahmad Ghassemi at the University of Oklahoma is the project PI.

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the Utah FORGE EGS reservoir using three methods: a laboratory rock-core stress estimation combined with a Machine Learning approach for estimation of in-situ stress from field sonic-log data, a field based in-situ measurement (min-frac) approach, and a modeling approach. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.