This child item data set contains grids of water surface elevation for inundated areas derived from flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

This child item data set contains grids of inundation depths computed from flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

This child item data set contains polygons delineating inundated areas derived from flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

This child item data set contains polygons delineating inundated areas derived from flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

This child item data set contains the hydraulic model used for flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

This child item data set contains the hydraulic model used for flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

Digital flood-inundation maps for a 2.4-mile reach of the Schoharie Creek in North Blenheim, New York, were created by the U.S. Geological Survey (USGS) in cooperation with the New York Power Authority. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://fim.wim.usgs.gov/fim/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Schoharie Creek near North Blenheim, NY (station number 01350212). Flood profiles were computed for the stream reach by means of a two-dimensional implicit finite volume hydraulic model. The model was calibrated using the active (as of April, 2021) stage-discharge ratings at two USGS streamgages on the Schoharie Creek (Schoharie Creek near North Blenheim, NY [01350212] and Schoharie Creek at North Blenheim, NY [01350180]) and documented high-water marks in the study reach from the floods of August 28, 2011, January 19, 1996, and April 4, 1987. The hydraulic model was used to compute 13 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 14 ft, or near bankfull, to 26 ft, which is the highest whole-foot-increment on the stage-discharge rating for the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.52-ft vertical accuracy and 3.3-ft horizontal resolution) to delineate the area flooded at each stage. This data release contains five child items: (1) the field survey points used in model development; (2) the hydraulic model used to develop the inundation maps, and the (3) depth grids, (4) inundation polygons, and (5) water surface elevation grids from the model output.

Digital flood-inundation maps for a 2.4-mile reach of the Schoharie Creek in North Blenheim, New York, were created by the U.S. Geological Survey (USGS) in cooperation with the New York Power Authority. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://fim.wim.usgs.gov/fim/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Schoharie Creek near North Blenheim, NY (station number 01350212). Flood profiles were computed for the stream reach by means of a two-dimensional implicit finite volume hydraulic model. The model was calibrated using the active (as of April, 2021) stage-discharge ratings at two USGS streamgages on the Schoharie Creek (Schoharie Creek near North Blenheim, NY [01350212] and Schoharie Creek at North Blenheim, NY [01350180]) and documented high-water marks in the study reach from the floods of August 28, 2011, January 19, 1996, and April 4, 1987. The hydraulic model was used to compute 13 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 14 ft, or near bankfull, to 26 ft, which is the highest whole-foot-increment on the stage-discharge rating for the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from light detection and ranging data having a 0.52-ft vertical accuracy and 3.3-ft horizontal resolution) to delineate the area flooded at each stage. This data release contains five child items: (1) the field survey points used in model development; (2) the hydraulic model used to develop the inundation maps, and the (3) depth grids, (4) inundation polygons, and (5) water surface elevation grids from the model output.

Digital flood-inundation maps for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service (site SBRN1) at https://water.weather.gov/ahps2/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current (2018) stage-discharge relation at the Platte River at Scottsbluff, Nebr., streamgage. The hydraulic model was then used to compute 10 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft, or near bankfull, to 18 ft, which exceeds the stage that corresponds to the estimated 1-percent annual exceedance probability flood (100-year recurrence interval flood). The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model derived from light detection and ranging data having a 0.6-ft root mean square error and 2-ft horizontal resolution resampled to a 6-ft grid to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.

Digital flood-inundation polygon shapefiles for an 8.8-mile reach of the North Platte River, from 1.5 miles upstream of the Highway 92 bridge to 3 miles downstream of the Highway 71 bridge, were created by the U.S. Geological Survey (USGS) in cooperation with the Cities of Scottsbluff and Gering. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Platte River at Scottsbluff, Nebr. (station 06680500). Near-real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service (site SBRN1) at https://water.weather.gov/ahps2/. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the current (2018) stage-discharge relation at the Platte River at Scottsbluff, Nebr., streamgage. The hydraulic model was then used to compute 10 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 9 ft, or near bankfull, to 18 ft, which exceeds the stage that corresponds to the estimated 1-percent annual exceedance probability flood (100-year recurrence interval flood). The simulated water-surface profiles were then combined with a Geographic Information System digital elevation model derived from light detection and ranging data having a 0.6-ft root mean square error and 2-ft horizontal resolution resampled to a 6-ft grid to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post flood recovery efforts.