데이터셋 상세
미국
Data Files Associated with Orthogonal Machining Tests on Carbon Fiber Reinforced Plastics (CFRP)
This dataset is a supplement to the paper titled "Fiber Orientation Angle Effects in Machining of Unidirectional CFRP Laminated Composites" (https://doi.org/10.1016/j.jmapro.2014.06.001). High speed videography of eight cutting tests were performed to study how cutting angle effects cutting force and workpiece surface finish. A description of the experimental setup, as well as a discussion of results, are given in the paper. Files containing video, thermal, force, and synchronization data for the tests are available for downloading. Detailed description is provided in the document "CFRP_Machining_Data_Description.pdf".
데이터 정보
연관 데이터
Dataset from Steel-Concrete Composite Floor Systems Subject to Fire - Phase 1
공공데이터포털
Experimental fire tests were conducted on four 12.8 m long steel-concrete composite floor beam assemblies with varying end support conditions, including two types of simple shear connections (shear tabs or welded-bolted double angles) and slab end continuity. Each specimen was constructed as a partially-composite beam, consisting of a lightweight concrete slab on formed metal decking supported by a W18x35 steel beam acting compositely via 19 mm diameter headed stud anchors spaced 305 mm. While resisting an ASCE 7-specified gravity load using hydraulic actuators, each specimen was exposed to a structurally significant fire that was produced using three natural gas-fueled burners distributed on the floor of the test compartment with the maximum heat release rate of 4 MW. Imposed mechanical loading and fire characteristics, thermal and structural responses, and structural failure modes of the specimens were studied.
Dataset from Steel-Concrete Composite Floor Systems Subject to Fire - Phase 1
공공데이터포털
Experimental fire tests were conducted on four 12.8 m long steel-concrete composite floor beam assemblies with varying end support conditions, including two types of simple shear connections (shear tabs or welded-bolted double angles) and slab end continuity. Each specimen was constructed as a partially-composite beam, consisting of a lightweight concrete slab on formed metal decking supported by a W18x35 steel beam acting compositely via 19 mm diameter headed stud anchors spaced 305 mm. While resisting an ASCE 7-specified gravity load using hydraulic actuators, each specimen was exposed to a structurally significant fire that was produced using three natural gas-fueled burners distributed on the floor of the test compartment with the maximum heat release rate of 4 MW. Imposed mechanical loading and fire characteristics, thermal and structural responses, and structural failure modes of the specimens were studied.
Single fiber tensile testing data for multiple fibers at multiple gauge lengths
공공데이터포털
A compilation of single fiber tensile tests for 6 different materials at 8 different gauge lengths. Fibers included are 3 different aramids, a liquid crystal polyester, regenerated cellulose, and nylon 6,6.
Enhanced durability of CNT based hierarchical composites subjected to accelerated aging environments.
공공데이터포털
Flexure testing, SEM, FTIR_ATR, Acoustic testing, Electrical testing, XRD, DSC, TGA
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
공공데이터포털
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-static and dynamic loading rates. The testing procedures are described in NISTIR 8265.
Effect of temperature and strain rate on ultra high molar mass polyethylene (UHMMPE) fibers
공공데이터포털
This dataset consists of tensile tests performed by directly gripping single UHMMPE fibers. The tests were conducted at 11 different temperatures, and at both quasi-static and dynamic loading rates. The testing procedures are described in NISTIR 8265.
목록