The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. To produce the digital map, we used a combination of 2001 1:12,000-scale true color aerial photography, 2001 1:40,000-scale true color ortho-rectified imagery reproduced at 1:12,000-scale, and 3 years of ground-truthing to interpret the complex patterns of vegetation and landuse at ROMO. In the end, 46 map units were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcInfo© software. Draft maps created from the vegetation classification were field-tested and revised before independent ecologists conducted an assessment of the map’s accuracy during 2004.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Vegetation and land use were interpreted to as detailed a level possible from high-resolution, 9” x 9” stereo pairs of 1:12,000-scale true color aerial photography. Polygons representing vegetation or land use map classes were delineated directly on-screen through heads-up digitizing using ArcGIS editing tools and transferred to a spatial database. The project used the program standard minimum mapping unit of 0.5 ha with few exceptions. Fifty-four map classes represented by 31,497 polygons were developed for CANY. A total of 30,329 polygons represent 41 natural or semi-natural vegetation map classes covering 94.8% of the mapping project area. One map class was documented as point locations only. Twelve additional land use/land cover and geologic map classes describe 1,168 polygons (3.7% of polygons and 5.2% of the area). Average polygon size across all map classes is 9.9 ha (24.4 acres). Lands within CANY make up 135,204 ha (334,096 acres) or 79.2% of the total project area. Blackbrush Shrubland had the highest number of polygons (3600) polygons covering 9.4% of the mapping area. The Potholed and Jointed Sandstone Woodland Complex is the most common map class, delineated on 30,495 ha (75,354 acres) or 17.9% of the project area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Vegetation and land use were interpreted to as detailed a level possible from high-resolution, 9” x 9” stereo pairs of 1:12,000-scale true color aerial photography. Polygons representing vegetation or land use map classes were delineated directly on-screen through heads-up digitizing using ArcGIS editing tools and transferred to a spatial database. The project used the program standard minimum mapping unit of 0.5 ha with few exceptions. Fifty-four map classes represented by 31,497 polygons were developed for CANY. A total of 30,329 polygons represent 41 natural or semi-natural vegetation map classes covering 94.8% of the mapping project area. One map class was documented as point locations only. Twelve additional land use/land cover and geologic map classes describe 1,168 polygons (3.7% of polygons and 5.2% of the area). Average polygon size across all map classes is 9.9 ha (24.4 acres). Lands within CANY make up 135,204 ha (334,096 acres) or 79.2% of the total project area. Blackbrush Shrubland had the highest number of polygons (3600) polygons covering 9.4% of the mapping area. The Potholed and Jointed Sandstone Woodland Complex is the most common map class, delineated on 30,495 ha (75,354 acres) or 17.9% of the project area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The mapping component of the BRCA project used a combination of methods to interpret and delineate vegetation and land use polygons. The USGS applied an electronic segmentation method (e-Cognition software) to create preliminary linework on features with high-contrast photo-signatures. Using the preliminary linework as a baseline starting point, the primary photointerpreter drew polygons directly on screen through heads-up digitizing using ArcGIS editing tools. Additionally, trained photointerpreters assisting the primary photointerpreter drew polygons on Mylar overlays covering 1m resolution, 1:12,000-scale, 9 x 9-inch true-color aerial photographs. This process enabled the photointerpreters to view the landscape in stereo in order to identify finer details. The linework drawn on Mylar overlays was then transferred into digital media by heads-up digitizing using ArcGIS software. The park and environs were interpreted and mapped to the same level of detail.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The mapping component of the BRCA project used a combination of methods to interpret and delineate vegetation and land use polygons. The USGS applied an electronic segmentation method (e-Cognition software) to create preliminary linework on features with high-contrast photo-signatures. Using the preliminary linework as a baseline starting point, the primary photointerpreter drew polygons directly on screen through heads-up digitizing using ArcGIS editing tools. Additionally, trained photointerpreters assisting the primary photointerpreter drew polygons on Mylar overlays covering 1m resolution, 1:12,000-scale, 9 x 9-inch true-color aerial photographs. This process enabled the photointerpreters to view the landscape in stereo in order to identify finer details. The linework drawn on Mylar overlays was then transferred into digital media by heads-up digitizing using ArcGIS software. The park and environs were interpreted and mapped to the same level of detail.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The APMM provides polygonal data with floristic attributes along with categorical data for cover by vegetation type. The photographic interpretation was based on 1:15,840-scale true-color aerial photography (prints and transparencies) acquired in July and August 2004. The interpreted overlays were orthorectified along with the scanned aerial photography and vectorized using Arc/Info™ (ESRI, Inc.) software. The DCMM produces a raster database from which multiple vector products can be derived to depict the floristics (using any vegetation classification with defined thresholds) and quantitative metrics with estimates of statistical confidence for cover by species and class, quadratic mean diameter of tree stems and crowns by species, trees per acre, fine and coarse woody debris, and other metrics. Two Landsat 5 Thematic Mapper scenes acquired in July and September 2005 were processed with Intergraph® software utilizing all bands except the thermal band. . The APMM mapped 27 Generalized Alliances and seven non-vegetated classes with an overall proportion correct of 72% (based on the most liberal of three accuracy thresholds). The DCMM mapped 29 Generalized Alliances and three non-vegetated classes with on overall proportion correct of 86% (based on the most liberal of three accuracy thresholds).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The APMM provides polygonal data with floristic attributes along with categorical data for cover by vegetation type. The photographic interpretation was based on 1:15,840-scale true-color aerial photography (prints and transparencies) acquired in July and August 2004. The interpreted overlays were orthorectified along with the scanned aerial photography and vectorized using Arc/Info™ (ESRI, Inc.) software. The DCMM produces a raster database from which multiple vector products can be derived to depict the floristics (using any vegetation classification with defined thresholds) and quantitative metrics with estimates of statistical confidence for cover by species and class, quadratic mean diameter of tree stems and crowns by species, trees per acre, fine and coarse woody debris, and other metrics. Two Landsat 5 Thematic Mapper scenes acquired in July and September 2005 were processed with Intergraph® software utilizing all bands except the thermal band. . The APMM mapped 27 Generalized Alliances and seven non-vegetated classes with an overall proportion correct of 72% (based on the most liberal of three accuracy thresholds). The DCMM mapped 29 Generalized Alliances and three non-vegetated classes with on overall proportion correct of 86% (based on the most liberal of three accuracy thresholds).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. All classification plot information sampled in 2009 was documented, summarized, and geo-processed into a GIS shapefile that could be overlain on the NAIP ortho-imagery. CTI created preliminary map classes (also known as map units) based largely on whether the vegetation surrounding the plot locations could be readily identified and delineated on the NAIP imagery (i.e. photo signature development). Once the photo signatures were inventoried they were matched or cross-walked back to the preliminary list of plant associations prepared in the project work plan. Supplemental land-use and land-cover classes (Anderson 1976, amended 2002) were added to classify non-vegetated areas such as developments, roads, streams, ponds, bare ground, and active agricultural areas. All obvious land-use features were manually digitized and incorporated with the project boundary into a draft GIS layer. Initial interpretation and mapping focused only on delineating obvious landforms (e.g., geologic exposures and land use) and physiognomic features (e.g., grasslands versus shrublands versus woodlands).