This dataset provides the bottom pressure measurements collected during the 2019-2020 SWOT prelaunch field campaign conducted around the SWOT crossover location in the California Currents, 300km west of Monterey, California, USA. The Paroscientific Digiquartz pressure sensor was used. The data are recorded on a 15-second interval.

This dataset provides the in-situ measurements from a Pressure-sensing Inverted Echo Sounder (PIES) deployed by the SWOT prelaunch field campaign. The campaign was designed to test the performance of several instruments/platforms in meeting the SWOT Calibration/Validation (CalVal) requirement. It was conducted near the SWOT CalVal crossover location, about 300 kilometers west of Monterey, California between September, 2019 and January, 2020. The campaign also deployed three CTD moorings, a slocum glider, and another bottom pressure recorder. The PIES measurements include bottom pressure and the round-trip travel time from the IES, which can be used to derive equivalent steric height through regression. Details can be found in the user guide and the journal reference given in the documentation section.

This dataset provides the 1Hz time series of the sea surface height measured by a surface buoy equipped with a Global Position System (GPS). The GPS-mooring was deployed by the SWOT prelaunch field campaign conducted near the SWOT CalVal crossover location, about 300 kilometers west of Monterey, California between September, 2019 and January, 2020. The GPS measurements represent the total sea surface height including the Inverted barometer component. The same mooring also carries fixed-depth CTD sensors https://doi.org/10.5067/SWTPR-CTD11. They were used together with atmospheric pressure and bottom pressure measurements to close the sea surface equation (Wang et al., 2022). The campaign also deployed another two CTD moorings, a slocum glider, and a Pressure Inverted Echo Sounder (PIES). Details can be found in the user guide and the journal reference given in the documentation section.

This dataset provides the conductivity, temperature and depth (CTD) measurements from the fixed-depth CTD sensors mounted on a full-depth mooring deployed by the SWOT prelaunch field campaign. The campaign was designed to test the performance of several instruments/platforms in meeting the SWOT Calibration/Validation (CalVal) requirement. It was conducted near the SWOT CalVal crossover location, about 300 kilometers west of Monterey, California between September, 2019 and January, 2020. These fixed-depth CTDs cover the full depth from the ocean surface to the bottom. The surface buoy is equipped with a Global Positioning System (GPS) https://doi.org/10.5067/SWTPR-GPS01. There is also an adjacent bottom pressure recorder https://doi.org/10.5067/SWTPR-BPR01. The campaign also deployed another two CTD moorings, a slocum glider, one bottom pressure recorder and one Pressure Inverted Echo Sounder. Details can be found in the user guide and the journal reference given in the documentation section.

RBRduo pressure and temperature sensors (early 2015 generation), mounted on aluminum frames, were moored in shallow (< 6 m) water depths in Bellingham Bay, Washington, to capture wave heights and periods. Continuous pressure fluctuations are transformed into surface-wave observations of wave heights, periods, and frequency spectra at 30-minute intervals.

This dataset provides the conductivity, temperature and depth (CTD) measurements from the CTD sensors on a WireWalker profiler on a full-depth mooring deployed by the SWOT prelaunch field campaign. The campaign was designed to test the performance of several instruments/platforms in meeting the SWOT Calibration/Validation (CalVal) requirement. It was conducted near the SWOT CalVal crossover location, about 300 kilometers west of Monterey, California between September, 2019 and January, 2020. The WW samples the upper 500 m of the water column, while the deep ocean below 500 m are measured by fixed-depth CTDs https://doi.org/10.5067/SWTPR-CTD01. The campaign also deployed another two CTD moorings, a slocum glider, one bottom pressure recorder and one Pressure Inverted Echo Sounder. Details can be found in the user guide and the journal reference given in the documentation section.

이 데이터셋의 설명이 없습니다

이 데이터셋의 설명이 없습니다

This dataset provides the first year of hourly ocean bottom pressure measurements at the North Pole from the Arctic Bottom Pressure Recorder - Follow On (ABPR-FO) deployed in August 2022. Based around a Paroscientific Digiquartz pressure sensor, the ABPR-FO is designed and powered to collect and transmit data for 5 years. The 5-year record will be collected, quality-controlled and updated at PO.DAAC on a yearly basis. The full time series is provided as a single netCDF file, and reports both bottom pressure (reported as liquid water equivalent thickness) and temperature. This dataset aims to serve as in situ validation for GRACE-FO data products in the central Arctic. This project is funded by NASA’s GRACE and GRACE-FO Science Team and supported by PONANT Science.

이 데이터셋의 설명이 없습니다