This research effort is a modeling study using the HYDRUS (2D/3D) computer program (www.pc-progress.com) and described in the manuscript/journal article entitled “Comparison of recharge from drywells and infiltration basins: a modeling study.” All the tables and figures in the journal article will be documented within an Excel spreadsheet that will include worksheet tabs with data associated with each table and figure. The tabs, columns, and rows will be clearly labeled to identify table/figures, variables, and units. The information supporting the model runs will be supported in the example library of HYDRUS (2D/3D) maintained by PC-Progress. Non-standard HYDRUS subroutines for the drywell and for the infiltration pond simulations that were funded by this research will be added and made available for viewing and download. After the 1 year embargo period the site will include a link to the PubMed Central manuscript. For example, the HYDRUS library for the transient head drywell associated with the Sasidharan et al. (2018) paper is now active (https://www.pcprogress.com/en/Default.aspx?h3d2-lib-Drywell ). This dataset is associated with the following publication: Sasidharan, S., S. Bradford, J. Simunek, and S. Kraemer. Comparison of recharge from drywells and infiltration basins: A modeling study. JOURNAL OF HYDROLOGY. Elsevier Science Ltd, New York, NY, USA, 594: 125720, (2021).

A three-dimensional unsaturated-zone flow model was developed using Hydrus-3D (PC-Progress, Inc.) to simulate managed aquifer recharge at the Southeast Houghton Artificial Recharge Project (SHARP) in Tucson, AZ. Recharge of up to about 4,000 acre-feet per year takes place at three surface basins. The model simulates variable-saturated flow in the unsaturated zone and groundwater mounding. The local-scale model (2 km x 2 km) does not simulate regional groundwater flow. The model was calibrated using groundwater-level data, repeat microgravity data, and PEST++ model calibration software. Additional information about the model and results is in the U.S. Geological Survey Scientific Investigations report 2024-XXXX (https://doi.org/10.3133/sir2024XXXX). Running the model requires a (paid) license for Hydrus-3D software.

,The HYDRUS program is a finite element model for simulating the one-dimensional movement of water, heat, and multiple solutes in variably saturated media. The program numerically solves the Richards' equation for saturated-unsaturated water flow and Fickian-based advection-dispersion equations for heat and solute transport. The flow equation incorporates a sink term to account for water uptake by plant roots. The heat transport equation considers conduction as well as convection with flowing water. The solute transport equations consider advective-dispersive transport in the liquid phase, and diffusion in the gaseous phase. The transport equations also include provisions for nonlinear and/or nonequilibrium reactions between the solid and liquid phases, linear equilibrium reactions between the liquid and gaseous phases, zero-order production, and two first-order degradation reactions: one which is independent of other solutes, and one which provides the coupling between solutes involved in sequential first-order decay reactions. The program may be used to analyze water and solute movement in unsaturated, partially saturated, or fully saturated porous media.,The flow region itself may be composed of nonuniform soils. Flow and transport can occur in the vertical, horizontal, or a generally inclined direction. The water flow part of the model can deal with (constant or time-varying) prescribed head and flux boundaries, boundaries controlled by atmospheric conditions, as well as free drainage boundary conditions. Soil surface boundary conditions may change during the simulation from prescribed flux to prescribed head type conditions (and vice-versa).,For solute transport the code supports both (constant and varying) prescribed concentration (Dirichlet or first-type) and concentration flux (Cauchy or third-type) boundary conditions. The dispersion coefficient includes terms reflecting the effects of molecular diffusion and tortuosity.,The unsaturated soil hydraulic properties are described using van Genuchten [1980], Brooks and Correy [1964] and modified van Genuchten type analytical functions. Modifications were made to improve the description of hydraulic properties near saturation. The HYDRUS code incorporates hysteresis by using the empirical model introduced by Scott et al. [1983] and Kool and Parker [1987]. This model assumes that drying scanning curves are scaled from the main drying curve, and wetting scanning curves from the main wetting curve. HYDRUS also implements a scaling procedure to approximate hydraulic variability in a given soil profile by means of a set of linear scaling transformations which relate the individual soil hydraulic characteristics to those of a reference soil.,Root growth is simulated by means of a logistic growth function. Water and salinity stress response functions can be defined according to functions proposed by Feddes et al. [1978] or van Genuchten [1987].,The governing flow and transport equations are solved numerically using Galerkin type linear finite element schemes. Integration in time is achieved using an implicit (backwards) finite difference scheme for both saturated and unsaturated conditions. Additional measures are taken to improve solution efficiency for transient problems, including automatic time step adjustment and adherence to preset ranges of the Courant and Peclet numbers. The water content term is evaluated using the mass-conservative method proposed by Celia et al. [1990]. Possible options for minimizing numerical oscillations in the transport solutions include upstream weighing, artificial dispersion, and/or performance indexing.,,

Simulation results and the figures in the manuscript that are generated. This dataset is associated with the following publication: Shang, F., J. Burkhardt, and R. Murray. Random Walk Particle Tracking to Model Dispersion in Steady Laminar and Turbulent Pipe Flow. JOURNAL OF HYDRAULIC ENGINEERING. American Society of Civil Engineers (ASCE), Reston, VA, USA, 149(7): 04023022, (2023).

Simulation results and the figures in the manuscript that are generated. This dataset is associated with the following publication: Shang, F., J. Burkhardt, and R. Murray. Random Walk Particle Tracking to Model Dispersion in Steady Laminar and Turbulent Pipe Flow. JOURNAL OF HYDRAULIC ENGINEERING. American Society of Civil Engineers (ASCE), Reston, VA, USA, 149(7): 04023022, (2023).