Map Index Sheets from Block and Lot Grid of Property Assessment and based on aerial photography, showing 1983 datum with solid line and NAD 27 with 5 second grid tics and italicized grid coordinate markers and outlines of map sheet boundaries. Each grid square is 3500 x 4500 feet. Each Index Sheet contains 16 lot/block sheets, labeled from left to right, top to bottom (4 across, 4 down): A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S. The first (4) numeric characters in a parcelID indicate the Index sheet in which the parcel can be found, the alpha character identifies the block in which most (or all) of the property lies.

This dataset contains boundaries of individual parcels in Allegheny County, including the county block and lot number. As this is a very large dataset, you may wish to use our property information extractor (http://tools.wprdc.org/parcels-n-at/) to download filtered versions of this parcel dataset. The most authoritative source for this data is now the PASDA page (https://www.pasda.psu.edu/uci/DataSummary.aspx?dataset=1214), which includes links to historical versions of the shapefile representations of this data.

This dataset contains photogrammetrically compiled roof outlines of buildings. All near orthogonal corners are square. Buildings that are less than 400 square feet are not captured. Special consideration is given to garages that are less than 400 square feet and will be digitized when greater than 200 square feet. Interim rooflines, such as dormers and party walls, as well as minor structures, such as carports, decks, patios, stairs, etc., and impermanent structures, such as sheds, are not shown. Large buildings which appear to house activities that are commercial or industrial in nature are shown as commercial/industrial. Structures that appear to be primarily residential in nature, including hotels and apartment buildings are shown as residential buildings. Structures which appear to be used or owned primarily by governmental, nonprofit, religious, or charitable organizations, or which serve a public function are shown as public buildings. Structures which are closely associated with a larger building, such as a garage, are shown as an out building. Structures which cannot be clearly defined as Industrial/Commercial; Residential; Public; or Out Buildings are flagged as such for later categorization. The classification of buildings is subject to the interpretation from the aerial photography and may not reflect the building’s actual use. Buildings that have an area less than the minimum required size for data capture will occasionally be present in the Geodatabase. Buildings are not removed after they have been digitized and determined to be less than the minimum required size. Development Notes: Data meets or exceeds map accuracy standards in effect during the spring of 1992 and updated as a result of a flyover in the spring of 2004 and 2015. Original data was derived from aerial photography flown in the spring of 1992 for the eastern half of the County and the spring of 1993 for the western half of the County. Photography was produced at a scale of 1"=1500'. Mapping was stereo digitized at a scale of 1"=200'.

These ESRI shape files are of National Park Service tract and boundary data that was created by the Land Resources Division. Tracts are numbered and created by the regional cartographic staff at the Land Resources Program Centers and are associated to the Land Status Maps. This data should be used to display properties that NPS owns and properties that NPS may have some type of interest such as scenic easements or right of ways.

These ESRI shape files are of National Park Service tract and boundary data that was created by the Land Resources Division. Tracts are numbered and created by the regional cartographic staff at the Land Resources Program Centers and are associated to the Land Status Maps. This data should be used to display properties that NPS owns and properties that NPS may have some type of interest such as scenic easements or right of ways.

,

These ESRI shape files are of National Park Service tract and boundary data that was created by the Land Resources Division. Tracts are numbered and created by the regional cartographic staff at the Land Resources Program Centers and are associated to the Land Status Maps. This data should be used to display properties that NPS owns and properties that NPS may have some type of interest such as scenic easements or right of ways.

These ESRI shape files are of National Park Service tract and boundary data that was created by the Land Resources Division. Tracts are numbered and created by the regional cartographic staff at the Land Resources Program Centers and are associated to the Land Status Maps. This data should be used to display properties that NPS owns and properties that NPS may have some type of interest such as scenic easements or right of ways.

These ESRI shape files are of National Park Service tract and boundary data that was created by the Land Resources Division. Tracts are numbered and created by the regional cartographic staff at the Land Resources Program Centers and are associated to the Land Status Maps. This data should be used to display properties that NPS owns and properties that NPS may have some type of interest such as scenic easements or right of ways.