This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 32 satellite transmitters attached to Whimbrels on their breeding range in arctic and western Alaska, 2006-2010. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every Argos location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check (based on distance, turning angle, and rate thresholds). Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as the transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.

This data release includes 2 child items with tracking data for Whimbrels, a shorebird found throughout tundra and boreal habitats of Alaska during the summer and winters along the coasts of the continental U.S., and central and South America. Child Item 1: "Argos Satellite Tracking Data for Whimbrels (Numenius phaeopus) - Processed Data" -- Quality-controlled data collected from Argos satellite transmitters. Child Item 2: "Argos Satellite Tracking Data for Whimbrels (Numenius phaeopus) - Raw Data" -- All raw data collected from Argos satellite transmitters, provided for completeness of the archive. The quality-controlled, "Argos Processed Data" (Child Item 1) are better suited for most analytical purposes.

This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 92 satellite transmitters attached to Red-throated Loons on their breeding range in coastal areas throughout Alaska, 2000-2010. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check. Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as a transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.

This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 53 satellite transmitters attached to Black Scoters on their breeding and winter ranges in western Alaska, 2003-2007. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check. Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as a transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.

This metadata document describes the data contained in the "rawData" folder of this data package. This data package contains all data collected by the Argos System from 53 satellite transmitters attached to Black Scoters on their breeding and winter ranges in western Alaska, 2003-2007. Five data files are included in the "rawData" folder of this data package. Two data files (with identical content) contain the raw Argos DIAG (Diagnostic) data, one in the legacy verbose ASCII format and one in a tabular Comma Separate Value (CSV) format. Two other data files (with identical content) contain the raw Argos DS (Dispose) data, one in the legacy verbose ASCII format and one in a tabular CSV format. The fifth file, "deploymentAttributes", contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "processedData" folder of this data package.

This metadata document describes the data contained in the "rawData" folder of this data package. This data package contains all data collected by the Argos System from 92 satellite transmitters attached to Red-throated Loons on their breeding range in coastal areas throughout Alaska, 2000-2010. Five data files are included in the"rawData" folder of this data package. Two data files (with identical content) contain the raw Argos DIAG (Diagnostic) data, one in the legacy verbose ASCII format and one in a tabular Comma Separate Value (CSV) format. Two other data files (with identical content) contain the raw Argos DS (Dispose) data, one in the legacy verbose ASCII format and one in a tabular CSV format. The fifth file, "deploymentAttributes", contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "processedData" folder of this data package.

This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 8 satellite transmitters attached to Pelagic cormorants on their breeding range at Middleton and Attu Islands, Alaska, 2000-2006. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every Argos location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check (based on distance, turning angle, and rate thresholds). Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as the transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.

This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 92 satellite transmitters attached to adult Yellow-billed Loons on their breeding range in Arctic Alaska and Canada, 2002-2017. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check. Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as a transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.

This metadata document describes the data contained in the "rawData" folder of this data package. This data package contains all data collected by the Argos System from 92 satellite transmitters attached to adult Yellow-billed Loons on their breeding range in Arctic Alaska and Canada, 2002-2017. Five data files are included in the "rawData" folder of this data package. Two data files (with identical content) contain the raw Argos DIAG (Diagnostic) data, one in the legacy verbose ASCII format and one in a tabular Comma Separate Value (CSV) format. Two other data files (with identical content) contain the raw Argos DS (Dispose) data, one in the legacy verbose ASCII format and one in a tabular CSV format. The fifth file, "deploymentAttributes", contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "processedData" folder of this data package.

This metadata document describes the data contained in the "processedData" folder of this data package. This data package contains all data collected by the Argos System from 19 satellite transmitters attached to Northern Fulmars on their breeding range in the Bering Sea and northern Gulf of Alaska, 2001-2006. The raw data were processed to accomplish two goals: flag implausible location estimates and decode raw sensor data. Three Comma Separate Value (CSV) tables are included in the "processedData" folder of this data package: 1) the "diag_filteredLocations" table contains one record for every Argos location estimate collected, accompanied by a binary flag that denotes an algorithm's plausibility check (based on distance, turning angle, and rate thresholds). Each record also includes a 'Tracking_Status' variable that denotes whether the location was collected from a live animal, a dead animal, or shed transmitter, 2) the "decodedSensor" table contains decoded sensor data such as the transmitter's temperature, battery voltage, and motion (activity), and 3) the "deploymentAttributes" table contains one record for each transmitter deployment in a CSV formatted table. The deployment attributes file contains information such as when the transmitter was attached to the animal, when tracking of a live animal ended, and a variety of variables describing the animal and transmitter. This table is identical to the "deploymentAttributes" table in the "rawData" folder of this data package.