This dataset contains back trajectories, boundary layer influences, and convective influences of air parcels along NASA DC-8 aircraft's flight tracks during the four ATom campaigns that occurred from 2016 to 2018. Back trajectories were interpolated using National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) and Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA2) meteorology. Back trajectory analysis determines the origin of air masses by modeling the path of an air parcel backward in time. It can be used to better understand the sources of atmospheric compounds. Boundary layer Influences were determined based on 30 Day Back Trajectories. The atmospheric boundary layer is the lowest part of the troposphere that is directly influenced by earth's surface. The boundary layer influences wind patterns and thus the dispersal of pollutants and other atmospheric compounds of interest. Convective influences were based on 10 Day Back Trajectories and NASA Langley cloud products. Convective influences model the effects of convection on the movement of water vapor through the atmosphere, which influences cloud behavior.

This dataset contains flight dynamics and environmental parameters (often referred to as housekeeping) specific to the DC-8 aircraft as collected from an assortment of instruments across all four ATom campaigns flown from 2016 through 2018. Measurements include aircraft position, altitude, speed, wind parameters, air temperature, and atmospheric and cabin pressure. These data can be used to understand the interior and exterior conditions and positioning of the DC-8 aircraft at 1-second resolution.

The CAMEX-4 DC-8 Forward and NADIR Video dataset consists of DVDs which capture the forward and nadir views from the NASA DC-8 aircraft during CAMEX-4 flights. These videos contain timestamps and the recorded voice channels of the scientists and mission managers aboard the aircraft during flights studying storm conditions.

This dataset provides flight track and aircraft navigation data from the NASA Atmospheric Tomography Mission (ATom). Flight track information is available for the four ATom campaigns: ATom-1, ATom-2, ATom-3, and ATom-4. Each ATom campaign consists of multiple individual flights and flight navigational information is recorded in 10-second intervals. Data available for each flight includes research flight number, date, and start and stop time of each 10-second interval. In addition, latitude, longitude, altitude, pressure and temperature is included at each 10-second interval. NASA's ATom campaign deploys an extensive gas and aerosol payload on the NASA DC-8 aircraft for systematic, global-scale sampling of the atmosphere, profiling continuously from 0.2 to 12 km altitude. Flights occurred in each of 4 seasons from 2016 to 2018. During each campaign, flights originate from the Armstrong Flight Research Center in Palmdale, California, fly north to the western Arctic, south to the South Pacific, east to the Atlantic, north to Greenland, and return to California across central North America. ATom establishes a single, contiguous, global-scale dataset. One intended use of this flight track data is to facilitate to mapping model results from global models onto the precise ATom flight tracks for comparison.

This dataset contains flight dynamics and environmental parameters (often referred to as housekeeping) specific to the DC-8 aircraft as collected from an assortment of instruments across all four ATom campaigns flown from 2016 through 2018. Measurements include aircraft position, altitude, speed, wind parameters, air temperature, and atmospheric and cabin pressure. These data can be used to understand the interior and exterior conditions and positioning of the DC-8 aircraft at 1-second resolution.

This dataset contains back trajectories, boundary layer influences, and convective influences of air parcels along NASA DC-8 aircraft's flight tracks during the four ATom campaigns that occurred from 2016 to 2018. Back trajectories were interpolated using National Centers for Environmental Prediction (NCEP) Global Forecast System (GFS) and Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA2) meteorology. Back trajectory analysis determines the origin of air masses by modeling the path of an air parcel backward in time. It can be used to better understand the sources of atmospheric compounds. Boundary layer Influences were determined based on 30 Day Back Trajectories. The atmospheric boundary layer is the lowest part of the troposphere that is directly influenced by earth's surface. The boundary layer influences wind patterns and thus the dispersal of pollutants and other atmospheric compounds of interest. Convective influences were based on 10 Day Back Trajectories and NASA Langley cloud products. Convective influences model the effects of convection on the movement of water vapor through the atmosphere, which influences cloud behavior.

The CAMEX-4 DC-8 Forward and NADIR Video dataset consists of DVDs which capture the forward and nadir views from the NASA DC-8 aircraft during CAMEX-4 flights. These videos contain timestamps and the recorded voice channels of the scientists and mission managers aboard the aircraft during flights studying storm conditions. For further information and to obtain this data, please contact GHRC at support-ghrc@earthdata.nasa.gov

DC3_Radiation_AircraftInSitu_DC8_Data are in-situ radiation data collected onboard the DC-8 aircraft during the Deep Convective Clouds and Chemistry (DC3) field campaign. Data collection for this product is complete. The Deep Convective Clouds and Chemistry (DC3) field campaign sought to understand the dynamical, physical, and lightning processes of deep, mid-latitude continental convective clouds and to define the impact of these clouds on upper tropospheric composition and chemistry. DC3 was conducted from May to June 2012 with a base location of Salina, Kansas. Observations were conducted in northeastern Colorado, west Texas to central Oklahoma, and northern Alabama in order to provide a wide geographic sample of storm types and boundary layer compositions, as well as to sample convection. DC3 had two primary science objectives. The first was to investigate storm dynamics and physics, lightning and its production of nitrogen oxides, cloud hydrometeor effects on wet deposition of species, surface emission variability, and chemistry in anvil clouds. Observations related to this objective focused on the early stages of active convection. The second objective was to investigate changes in upper tropospheric chemistry and composition after active convection. Observations related to this objective focused on the 12-48 hours following convection. This objective also served to explore seasonal change of upper tropospheric chemistry. In addition to using the NSF/NCAR Gulfstream-V (GV) aircraft, the NASA DC-8 was used during DC3 to provide in-situ measurements of the convective storm inflow and remotely-sensed measurements used for flight planning and column characterization. DC3 utilized ground-based radar networks spread across its observation area to measure the physical and kinematic characteristics of storms. Additional sampling strategies relied on lightning mapping arrays, radiosondes, and precipitation collection. Lastly, DC3 used data collected from various satellite instruments to achieve its goals, focusing on measurements from CALIOP onboard CALIPSO and CPL onboard CloudSat. In addition to providing an extensive set of data related to deep, mid-latitude continental convective clouds and analyzing their impacts on upper tropospheric composition and chemistry, DC3 improved models used to predict convective transport. DC3 improved knowledge of convection and chemistry, and provided information necessary to understanding the processes relating to ozone in the upper troposphere.

DC3_jValue_AircraftInSitu_DC8_Data are photolysis rate (j value) data collected onboard the DC-8 aircraft during the Deep Convective Clouds and Chemistry (DC3) field campaign. Data collection for this product is complete. The Deep Convective Clouds and Chemistry (DC3) field campaign sought to understand the dynamical, physical, and lightning processes of deep, mid-latitude continental convective clouds and to define the impact of these clouds on upper tropospheric composition and chemistry. DC3 was conducted from May to June 2012 with a base location of Salina, Kansas. Observations were conducted in northeastern Colorado, west Texas to central Oklahoma, and northern Alabama in order to provide a wide geographic sample of storm types and boundary layer compositions, as well as to sample convection. DC3 had two primary science objectives. The first was to investigate storm dynamics and physics, lightning and its production of nitrogen oxides, cloud hydrometeor effects on wet deposition of species, surface emission variability, and chemistry in anvil clouds. Observations related to this objective focused on the early stages of active convection. The second objective was to investigate changes in upper tropospheric chemistry and composition after active convection. Observations related to this objective focused on the 12-48 hours following convection. This objective also served to explore seasonal change of upper tropospheric chemistry. In addition to using the NSF/NCAR Gulfstream-V (GV) aircraft, the NASA DC-8 was used during DC3 to provide in-situ measurements of the convective storm inflow and remotely-sensed measurements used for flight planning and column characterization. DC3 utilized ground-based radar networks spread across its observation area to measure the physical and kinematic characteristics of storms. Additional sampling strategies relied on lightning mapping arrays, radiosondes, and precipitation collection. Lastly, DC3 used data collected from various satellite instruments to achieve its goals, focusing on measurements from CALIOP onboard CALIPSO and CPL onboard CloudSat. In addition to providing an extensive set of data related to deep, mid-latitude continental convective clouds and analyzing their impacts on upper tropospheric composition and chemistry, DC3 improved models used to predict convective transport. DC3 improved knowledge of convection and chemistry, and provided information necessary to understanding the processes relating to ozone in the upper troposphere.

This dataset provides Modeling Data Stream (MDS) and Reactivity Data Stream (RDS) products for each of the four ATom campaigns conducted from 2016 to 2018. MDS files contain the atmospheric constituents needed to model the RDS of the air parcels along ATom flight paths. The MDS is a continuous data stream (every 10 seconds) of the atmospheric content of these key chemical species derived from the in-situ measurements collected along ATom flight paths (as reported in the comprehensive related dataset ATom: Merged Atmospheric Chemistry, Trace Gases, and Aerosols). Values for chemical species measured by multiple instruments were selected from the instrument with better coverage and/or greater precision. Missing values were filled using interpolation for short gaps. For long gaps owing to instrument failure, values were estimated using multiple linear regressions from comparable parallel flights from other ATom campaigns. All species were flagged for instrument source and values were flagged for gap-filling status. In combination, MDS and RDS provide, in essence, a photochemical climatology for each air parcel along ATom flight paths containing the reactive species that control the loss of methane and the production and loss of ozone.