File 100-025b is a 60-m ASCII grid of depth data collected near Nihoa Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-025b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

Gridded bathymetry (20m) of the shelf and slope environments of Twin Banks, Hawaii, USA. Bottom coverage was achieved in depths between 61 and 1500 meters. The netCDF grid includes multibeam bathymetry from the Simrad EM120 and EM1002 multibeam sonars collected as of October 2006 by the NOAA Coral Reef Ecosystem Division in depths between 20 and 5000 meters.

Gridded bathymetry (20m) of the shelf and slope environments of Twin Banks, Hawaii, USA. Bottom coverage was achieved in depths between 61 and 1500 meters. The ASCII includes multibeam bathymetry from the Simrad EM120 and EM1002 multibeam sonars collected as of October 2006 by the NOAA Coral Reef Ecosystem Division in depths between 20 and 5000 meters.

File 100-002b is a 60-m ASCII grid of depth data collected near Lisianski Island and Pioneer Bank in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-002b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-027b is a 60-m ASCII grid of depth data collected near Transit to Nihoa in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-027b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-006b is a 60-m ASCII grid of depth data collected near Laysan Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-006b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-026b is a 60-m ASCII grid of depth data collected near Nihoa & Transit to Kauai in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-026b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-001b is a 60-m ASCII grid of depth data collected near Lisianski Island in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-001b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-017b is a 60-m ASCII grid of depth data collected near Kure Atoll in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-017b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.

File 100-004b is a 60-m ASCII grid of depth data collected near Northampton Seamounts in the Northwestern Hawaiian Islands as of May 2003. This grid has been produced as part of the "Bathymetric Atlas of the Northwestern Hawaiian Islands -- A Planning Document for Benthic Habitat Mapping -- Draft -- May 2003. Data sources for the downloadable grids include: multibeam bathymetry from Simrad EM1002 and EM120 sonars aboard the R/V Kilo Moana collected in October/November 2003; multibeam bathymetry data from a SeaBeam 210 sonar aboard the R/V Kai'imikai-O-Kanaloa collected in 2000-2002; LIDAR data obtained using the LADS MK II lidar system; and depth data derived from IKONOS satellite imagery. No tidal corrections have been applied to the data. The data source location for each type of data is indicated in the "dot plot" browse objects. Additional single-beam bathymetric data are available in this area and are indicated on the 100-004b Plot C browse object, but these less accurate depths are not included in the downloadable grid. Multibeam data were processed using SABER editing software and MBSystem and multibeam, LIDAR and IKONOS data were integrated using MBSystem, and GMT. Grid spacing is 60-m, horizontal accuracy is 20m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation.