We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1: https://doi.org/10.1371/journal.pone.0263056) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for three different thresholds (conservative to targeted). This data bundle contains a single file of tabular summaries by management unit (including each species/ ensemble type combination) and a subfolder for each species that contains the merged data sets used to create models, the six raster files associated with the species, and tabular outputs including response curve data, variable importance information, and model assessment metrics. Each of the six rasters represent the following: 1) 0.01 - one percentile threshold 2) 0.1 - ten percentile threshold 3) MaxSS - maximum sensitivity plus specificity threshold 4) 0.01 - one percentile threshold with Restricted Environmental Conditions 5) 0.1 - ten percentile threshold with Restricted Environmental Conditions 6) MaxSS - maximum sensitivity plus specificity threshold with Restricted Environmental Conditions The bundle documentation files are: 1) 'INHABIT_V3_metdata.xml' (this file) which contains the project-level metadata 2) managementSummaries.csv is the tabular summaries by management unit. 3) 'mergedDataset.csv' contains the merged data set used to create the models, including location and associated environmental data, for each species. 4) XX.tif where XX is the raster type explained above (threshold; masked or not). 5) responseCurves.csv is the tabular information need to produce response curves for each predictor retained in each of the 10 models produced for each species. 6) variableImportance.csv is the tabular summaries indicating predictor importance for each of the 10 models produced for each species. 7) assessmentMetrics.csv is the tabular summaries of assessment metrics for each model or ensemble for each species. These data will be integrated into the third version of the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. These species include: African rue (Peganum harmala), Air potato (Dioscorea bulbifera), Alkali swainsonpea (Sphaerophysa salsula), Amur honeysuckle (Lonicera maackii), Amur maple (Acer ginnala), Amur peppervine (Ampelopsis brevipedunculata), Annual bluegrass (Poa annua), Annual rye (Lolium multiflorum), Asian mustard (Brassica tournefortii), Autumn olive (Elaeagnus umbellata), Balloon vine (Cardiospermum halicacabum), Beefsteak mint (Perilla frutescens), Bermudagrass (Cynodon dactylon), Bigleaf periwinkle (Vinca major), Bird vetch (Vicia cracca), Bishop's goutweed (Aegopodium podagraria), Black henbane (Hyoscyamus niger), Bohemian knotweed (Fallopia bohemica), Bradford pear (Pyrus calleryana), Brazilian peppertree (Schinus terebinthifolius), Briton's wild petunia (Ruellia simplex), Broad leaved helleborine (Epipactis helleborine), Buffelgrass (Cenchrus ciliaris), Bulbous bluegrass (Poa bulbosa), Bull thistle (Cirsium vulgare), Bur

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. Each species folder contains the potential distribution of the species and all raster layers were produced using VisTrails:SAHM [SAHM 2.1.2]. Each of the 8 rasters represent the following: 1) MPP - minimum predicted presence threshold 2) 0.01 - one percentile threshold 3) 0.1 - ten percentile threshold 4) MaxSS - maximum sensitivity plus specificity threshold 5) MPP - minimum predicted presence threshold with Restricted Environmental Conditions 6) 0.01 - one percentile threshold with Restricted Environmental Conditions 7) 0.1 - ten percentile threshold with Restricted Environmental Conditions 8) MaxSS - maximum sensitivity plus specificity threshold with Restricted Environmental Conditions These rasters will be integrated into the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. These species include: African rue (Peganum harmala), Air potato (Dioscorea bulbifera), Amur honeysuckle (Lonicera maackii), Amur peppervine (Ampelopsis brevipedunculata), Annual bluegrass (Poa annua ), Annual rye (Lolium multiflorum), Asian mustard (Brassica tournefortii), Beefsteak mint (Perilla frutescens), Bigleaf periwinkle (Vinca major), Bird vetch (Vicia cracca), Bishop's goutweed (Aegopodium podagraria), Black henbane (Hyoscyamus niger), Bohemian knotweed (Fallopia bohemica), Bradford pear (Pyrus calleryana), Buffelgrass (Cenchrus ciliaris), Bulbous bluegrass (Poa bulbosa), Bull thistle (Cirsium vulgare), Bur buttercup (Ranunculus testiculatus), Burning bush (Euonymus alatus), Camelthorn (Alhagi maurorum), Canada thistle (Cirsium arvense), Cereal rye (Secale cereale), Cheatgrass (Bromus tectorum), Chinaberry (Melia azedarach), Chinese holly (Ilex cornuta), Chinese privet (Ligustrum sinense), Chinese tallowtree (Triadica sebifera), Chinese wisteria (Wisteria sinensis), Chocolate vine (Akebia quinata), Clasping pepperweed (Lepidium perfoliatum), Cogongrass (Imperata cylindrica), Common crupina (Crupina vulgaris), Common gorse (Ulex europaeus ), Common reed (Phragmites australis), Common tansy (Tanacetum vulgare), Coral ardisia (Ardisia crenata), Crape myrtle (Lagerstroemia indica), Creeping bentgrass (Agrostis stolonifera), Creeping buttercup (Ranunculus repens), Crested wheatgrass (Agropyron cristatum), Crown vetch (Securigera varia), Dalmatian toadflax (Linaria dalmatica), Diffuse knapweed (Centaurea diffusa), Dyer's woad (Isatis tinctoria), English holly (Ilex aquifolium), English ivy (Hedera helix), European beachgrass (Ammophila arenaria ), False brome (Brachypodium sylvaticum), Field brome (Bromus arvensis), Fountaingrass (Pennisetum setaceum), French broom (Genista monspessulana), Fuller's teasel (Dipsacus fullonum), Garlic mustard (Alliaria petiolata), Giant knotweed (Fallopia sachalinensis), Hairy cat's ear (Hypochaeris radicata), Halogeton (Halogeton glomeratus),

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for four different thresholds. Each species folder contains the potential distribution of the species and all raster layers were produced using VisTrails:SAHM [SAHM 2.1.2]. Each of the 8 rasters represent the following: 1) MPP - minimum predicted presence threshold 2) 0.01 - one percentile threshold 3) 0.1 - ten percentile threshold 4) MaxSS - maximum sensitivity plus specificity threshold 5) MPP - minimum predicted presence threshold with Restricted Environmental Conditions 6) 0.01 - one percentile threshold with Restricted Environmental Conditions 7) 0.1 - ten percentile threshold with Restricted Environmental Conditions 8) MaxSS - maximum sensitivity plus specificity threshold with Restricted Environmental Conditions These rasters will be integrated into the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. These species include: African rue (Peganum harmala), Air potato (Dioscorea bulbifera), Amur honeysuckle (Lonicera maackii), Amur peppervine (Ampelopsis brevipedunculata), Annual bluegrass (Poa annua ), Annual rye (Lolium multiflorum), Asian mustard (Brassica tournefortii), Beefsteak mint (Perilla frutescens), Bigleaf periwinkle (Vinca major), Bird vetch (Vicia cracca), Bishop's goutweed (Aegopodium podagraria), Black henbane (Hyoscyamus niger), Bohemian knotweed (Fallopia bohemica), Bradford pear (Pyrus calleryana), Buffelgrass (Cenchrus ciliaris), Bulbous bluegrass (Poa bulbosa), Bull thistle (Cirsium vulgare), Bur buttercup (Ranunculus testiculatus), Burning bush (Euonymus alatus), Camelthorn (Alhagi maurorum), Canada thistle (Cirsium arvense), Cereal rye (Secale cereale), Cheatgrass (Bromus tectorum), Chinaberry (Melia azedarach), Chinese holly (Ilex cornuta), Chinese privet (Ligustrum sinense), Chinese tallowtree (Triadica sebifera), Chinese wisteria (Wisteria sinensis), Chocolate vine (Akebia quinata), Clasping pepperweed (Lepidium perfoliatum), Cogongrass (Imperata cylindrica), Common crupina (Crupina vulgaris), Common gorse (Ulex europaeus ), Common reed (Phragmites australis), Common tansy (Tanacetum vulgare), Coral ardisia (Ardisia crenata), Crape myrtle (Lagerstroemia indica), Creeping bentgrass (Agrostis stolonifera), Creeping buttercup (Ranunculus repens), Crested wheatgrass (Agropyron cristatum), Crown vetch (Securigera varia), Dalmatian toadflax (Linaria dalmatica), Diffuse knapweed (Centaurea diffusa), Dyer's woad (Isatis tinctoria), English holly (Ilex aquifolium), English ivy (Hedera helix), European beachgrass (Ammophila arenaria ), False brome (Brachypodium sylvaticum), Field brome (Bromus arvensis), Fountaingrass (Pennisetum setaceum), French broom (Genista monspessulana), Fuller's teasel (Dipsacus fullonum), Garlic mustard (Alliaria petiolata), Giant knotweed (Fallopia sachalinensis), Hairy cat's ear (Hypochaeris radicata), Halogeton (Halogeton glomeratus),

This is a dataset containing the potential distribution of 259 invasive terrestrial plant species. We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies and other managers. We applied the modeling workflow developed in Young et al. (2020, https://doi.org/10.1371/journal.pone.0229253) and adapted by Jarnevich et al. (2023, https://doi.org/10.1016/j.ecoinf.2023.101997). We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1: https://doi.org/10.1371/journal.pone.0263056) and relied on human input based on natural history knowledge to narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling (SAHM 2.2.2, Morisette et al., 2013). For each species, we generated up to three groups of models reflecting various levels of suitability including suitability for occurrence, suitability for abundance (>5% cover), and suitability for high abundance (>25% cover), where there were enough data available to create models. For occurrence, we accounted for uncertainty related to sampling bias by using two alternative sources of background samples. For all three groups of models, we constructed weighted ensembles using up to 20 models (occurrence) or 10 models (abundance) for each species. We also combined the three ensembles using three different thresholds converting the continuous values to suitable/unsuitable, ranging from inclusive to restrictive. This data bundle contains a single file of tabular summaries by management unit (including each species/ensemble type/abundance level combination), a file describing the changes from version 3, and a species metadata file. There is also a subfolder for each species that contains the merged data sets used to create models, up to 9 raster files associated with the species, and tabular outputs including response curve data, variable importance information, and model assessment metrics. The potential nine rasters included in each species subfolders represent the following: 1) Occurrence suitability - Continuous value ensemble 2) Abundance suitability - Continuous value ensemble 3) High abundance suitability - Continuous value ensemble 4) Restricted occurrence suitability - Continuous value ensemble with restricted environmental conditions* 5) Restricted abundance suitability - Continuous value ensemble with restricted environmental conditions* 6) Restricted high abundance suitability - Continuous value ensemble with restricted environmental conditions* 7) 0.01 – first percentile threshold applied to model group ensemble 8) 0.05 – fifth percentile threshold applied to model group ensemble 9) 0.1 – tenth percentile threshold applied to model group ensemble *Restricted environmental conditions = only display areas where environmental characteristics are inside the range of the values used to develop the model. For example, a location with a minimum winter temperature of 12 C would be outside the range of -10 to 10 C used in model development. The bundle documentation files are: 1) 'project_metadata_INHABIT_V4.xml' (this file) which contains the project-level metadata. 2) managementSummaries.csv is the tabular summaries by management unit. 3) 'INHABIT_VersionHistory.txt' contains information on the methodological changes incurred between this release and the previous data release. 4) 'species_metadata.csv' contains information on specific model changes of each species from tuning algorithm parameters to ensure model quality. 5) 'mergedDataset.csv' contains the merged data set used to create the models, including location and associated environmental data, for each species. 6) XX.tif where XX is the raster type explained above. 7) 'responseCurves.csv' is the tabular information need to produce response curves for each predictor

This is a dataset containing the potential distribution of 259 invasive terrestrial plant species. We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies and other managers. We applied the modeling workflow developed in Young et al. (2020, https://doi.org/10.1371/journal.pone.0229253) and adapted by Jarnevich et al. (2023, https://doi.org/10.1016/j.ecoinf.2023.101997). We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1: https://doi.org/10.1371/journal.pone.0263056) and relied on human input based on natural history knowledge to narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling (SAHM 2.2.2, Morisette et al., 2013). For each species, we generated up to three groups of models reflecting various levels of suitability including suitability for occurrence, suitability for abundance (>5% cover), and suitability for high abundance (>25% cover), where there were enough data available to create models. For occurrence, we accounted for uncertainty related to sampling bias by using two alternative sources of background samples. For all three groups of models, we constructed weighted ensembles using up to 20 models (occurrence) or 10 models (abundance) for each species. We also combined the three ensembles using three different thresholds converting the continuous values to suitable/unsuitable, ranging from inclusive to restrictive. This data bundle contains a single file of tabular summaries by management unit (including each species/ensemble type/abundance level combination), a file describing the changes from version 3, and a species metadata file. There is also a subfolder for each species that contains the merged data sets used to create models, up to 9 raster files associated with the species, and tabular outputs including response curve data, variable importance information, and model assessment metrics. The potential nine rasters included in each species subfolders represent the following: 1) Occurrence suitability - Continuous value ensemble 2) Abundance suitability - Continuous value ensemble 3) High abundance suitability - Continuous value ensemble 4) Restricted occurrence suitability - Continuous value ensemble with restricted environmental conditions* 5) Restricted abundance suitability - Continuous value ensemble with restricted environmental conditions* 6) Restricted high abundance suitability - Continuous value ensemble with restricted environmental conditions* 7) 0.01 – first percentile threshold applied to model group ensemble 8) 0.05 – fifth percentile threshold applied to model group ensemble 9) 0.1 – tenth percentile threshold applied to model group ensemble *Restricted environmental conditions = only display areas where environmental characteristics are inside the range of the values used to develop the model. For example, a location with a minimum winter temperature of 12 C would be outside the range of -10 to 10 C used in model development. The bundle documentation files are: 1) 'project_metadata_INHABIT_V4.xml' (this file) which contains the project-level metadata. 2) managementSummaries.csv is the tabular summaries by management unit. 3) 'INHABIT_VersionHistory.txt' contains information on the methodological changes incurred between this release and the previous data release. 4) 'species_metadata.csv' contains information on specific model changes of each species from tuning algorithm parameters to ensure model quality. 5) 'mergedDataset.csv' contains the merged data set used to create the models, including location and associated environmental data, for each species. 6) XX.tif where XX is the raster type explained above. 7) 'responseCurves.csv' is the tabular information need to produce response curves for each predictor

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for three different thresholds (conservative to targeted). This data release contains tabular summaries by management unit (including each species/ ensemble type combination). These data will be integrated into the third version of the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. These data will be integrated into the third version of the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. This file specifically, managementSummaries.csv, contains tabular summaries of the raster outputs summarized for each management unit for all species. These species include: African rue (Peganum harmala), Air potato (Dioscorea bulbifera), Alkali swainsonpea (Sphaerophysa salsula), Amur honeysuckle (Lonicera maackii), Amur maple (Acer ginnala), Amur peppervine (Ampelopsis brevipedunculata), Annual bluegrass (Poa annua), Annual rye (Lolium multiflorum), Asian mustard (Brassica tournefortii), Autumn olive (Elaeagnus umbellata), Balloon vine (Cardiospermum halicacabum), Beefsteak mint (Perilla frutescens), Bermudagrass (Cynodon dactylon), Bigleaf periwinkle (Vinca major), Bird vetch (Vicia cracca), Bishop's goutweed (Aegopodium podagraria), Black henbane (Hyoscyamus niger), Bohemian knotweed (Fallopia bohemica), Bradford pear (Pyrus calleryana), Brazilian peppertree (Schinus terebinthifolius), Briton's wild petunia (Ruellia simplex), Broad leaved helleborine (Epipactis helleborine), Buffelgrass (Cenchrus ciliaris), Bulbous bluegrass (Poa bulbosa), Bull thistle (Cirsium vulgare), Bur buttercup (Ranunculus testiculatus), Burning bush (Euonymus alatus), Caesarweed (Urena lobata), Camelthorn (Alhagi maurorum), Camphortree (Cinnamomum camphora), Canada thistle (Cirsium arvense), Cape-ivy (Delairea odorata), Castor bean (Ricinus communis), Cat's claw creeper (Dolichandra unguis-cati), Cereal rye (Secale cereale), Cheatgrass (Bromus tectorum), Chinaberry (Melia azedarach), Chinese holly (Ilex cornuta), Chinese pistache (Pistacia chinensis), Chinese privet (Ligustrum sinense), Chinese tallowtree (Triadica sebifera), Chinese wisteria (Wisteria sinensis), Chocolate vine (Akebia quinata), Clasping pepperweed (Lepidium perfoliatum), Coco yam (Colocasia esculenta), Cogongrass (Imperata cylindrica), Common buckthorn (Rhamnus cathartica), Common crupina (Crupina vulgaris), Common gorse (Ulex europaeus), Common reed (Phragmites australis), Common tansy (Tanacetum vulgare), Common wormwood (Artemisia vulgaris), Coral ardisia (Ardisia crenata), Crape myrtle (Lagerstroemia indica), Creeping bentgrass (Agrostis stolonifera), Creeping buttercup (Ranunculus repens), Crested wheatgrass (Agropyron cristatum), Crown vetch (Securigera varia), Curly dock (Rumex

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for three different thresholds (conservative to targeted). This data release contains tabular summaries by management unit (including each species/ ensemble type combination). These data will be integrated into the third version of the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. These data will be integrated into the third version of the Invasive Species Habitat Tool (INHABIT), a web application displaying visual and statistical summaries of nationwide habitat suitability models for manager identified invasive plant species. This file specifically, managementSummaries.csv, contains tabular summaries of the raster outputs summarized for each management unit for all species. These species include: African rue (Peganum harmala), Air potato (Dioscorea bulbifera), Alkali swainsonpea (Sphaerophysa salsula), Amur honeysuckle (Lonicera maackii), Amur maple (Acer ginnala), Amur peppervine (Ampelopsis brevipedunculata), Annual bluegrass (Poa annua), Annual rye (Lolium multiflorum), Asian mustard (Brassica tournefortii), Autumn olive (Elaeagnus umbellata), Balloon vine (Cardiospermum halicacabum), Beefsteak mint (Perilla frutescens), Bermudagrass (Cynodon dactylon), Bigleaf periwinkle (Vinca major), Bird vetch (Vicia cracca), Bishop's goutweed (Aegopodium podagraria), Black henbane (Hyoscyamus niger), Bohemian knotweed (Fallopia bohemica), Bradford pear (Pyrus calleryana), Brazilian peppertree (Schinus terebinthifolius), Briton's wild petunia (Ruellia simplex), Broad leaved helleborine (Epipactis helleborine), Buffelgrass (Cenchrus ciliaris), Bulbous bluegrass (Poa bulbosa), Bull thistle (Cirsium vulgare), Bur buttercup (Ranunculus testiculatus), Burning bush (Euonymus alatus), Caesarweed (Urena lobata), Camelthorn (Alhagi maurorum), Camphortree (Cinnamomum camphora), Canada thistle (Cirsium arvense), Cape-ivy (Delairea odorata), Castor bean (Ricinus communis), Cat's claw creeper (Dolichandra unguis-cati), Cereal rye (Secale cereale), Cheatgrass (Bromus tectorum), Chinaberry (Melia azedarach), Chinese holly (Ilex cornuta), Chinese pistache (Pistacia chinensis), Chinese privet (Ligustrum sinense), Chinese tallowtree (Triadica sebifera), Chinese wisteria (Wisteria sinensis), Chocolate vine (Akebia quinata), Clasping pepperweed (Lepidium perfoliatum), Coco yam (Colocasia esculenta), Cogongrass (Imperata cylindrica), Common buckthorn (Rhamnus cathartica), Common crupina (Crupina vulgaris), Common gorse (Ulex europaeus), Common reed (Phragmites australis), Common tansy (Tanacetum vulgare), Common wormwood (Artemisia vulgaris), Coral ardisia (Ardisia crenata), Crape myrtle (Lagerstroemia indica), Creeping bentgrass (Agrostis stolonifera), Creeping buttercup (Ranunculus repens), Crested wheatgrass (Agropyron cristatum), Crown vetch (Securigera varia), Curly dock (Rumex

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1: https://doi.org/10.1371/journal.pone.0263056) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for three different thresholds (conservative to targeted). The mergedDataset_regionalization.csv file contains predictor values associated with pixels underlying each presence and background point. The testStripPoints_regionalization.csv file contains the locations of the modeled species occurring in the different geographic test strips.

We developed habitat suitability models for invasive plant species selected by Department of Interior land management agencies. We applied the modeling workflow developed in Young et al. 2020 to species not included in the original case studies. Our methodology balanced trade-offs between developing highly customized models for a few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions (Engelstad et al. 2022 Table S1: https://doi.org/10.1371/journal.pone.0263056) and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.1.2]. We accounted for uncertainty related to sampling bias by using two alternative sources of background samples, and constructed model ensembles using the 10 models for each species (five algorithms by two background methods) for three different thresholds (conservative to targeted). The mergedDataset_regionalization.csv file contains predictor values associated with pixels underlying each presence and background point. The testStripPoints_regionalization.csv file contains the locations of the modeled species occurring in the different geographic test strips.

This is a dataset containing aggregated non-native plant occurrence and abundance data for the contiguous United States. We used these data to develop habitat suitability models for species found in the Eastern United States using locations with 5% cover or greater. We adapted the INHABIT modeling workflow (Young et al. 2020), using a consistent set of climatic predictors that were important in the INHABIT models. We developed models using five algorithms with VisTrails: Software for Assisted Habitat Modeling [SAHM 2.2.2]. We accounted for sampling bias by using the target background approach, and constructed model ensembles using the five models for each species for three different thresholds (conservative to targeted;1st percentile, 10th percentile, and maximum of sensitivity-specificity ). This data bundle contains a single file of occurrence data with abundance information (Nonnative_plants_US.csv) and a subfolder for each species that contains the two raster files associated with the species. Each of the two rasters represent the following: species_code for current climate and species_code.2c for predictions under a +2C climate change scenario. The bundle documentation files are: 1) 'project_metdata.xml' (this file) which contains the project-level metadata 2) Nonnative_plants_US.csv is the occurrence and abundance data. 3) XX.tif where XX is the species code with current climatic conditions and species code with '2c' appended for habitat suitability predictions with +2C of climate change.