The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. The designated base was the USGS digital orthophoto quarter quads (DOQQ’s) series for the Wateree and Gadsden 7.5 minute quadrangles. Creation of the DOQQ’s required having the image plotted onto clear mylar at the mapping input scale, approximately 1:12,000. To facilitate the geo referencing of the polygons, it was determined that the average (nominal) scale of the aerial photography was also approximately 1:12,000. Seven plots were generated at the normal scale on mylar overlays to cover the entire Monument and its environs.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. In order to accommodate the complex vegetation patterns often found in National Park units and generally maintain a minimum mapping unit of 0.5 ha, a three-tiered scheme was developed for attributing vegetation polygons. Where appropriate, secondary and tertiary vegetation classes are added to describe mixed-plant communities within the polygon. Secondary and tertiary classes were especially useful for describing ecotones, and for polygons with a patchwork of communities below the minimum mapping unit size. Final products included seamless park-wide GIS databases in ArcGIS geodatabase and ArcView shapefile formats of detailed overstory vegetation communities, along with vegetation statistics, hardcopy maps and orthophoto images plotted at large scale corresponding to the park area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. In order to accommodate the complex vegetation patterns often found in National Park units and generally maintain a minimum mapping unit of 0.5 ha, a three-tiered scheme was developed for attributing vegetation polygons. Where appropriate, secondary and tertiary vegetation classes are added to describe mixed-plant communities within the polygon. Secondary and tertiary classes were especially useful for describing ecotones, and for polygons with a patchwork of communities below the minimum mapping unit size. Final products included seamless park-wide GIS databases in ArcGIS geodatabase and ArcView shapefile formats of detailed overstory vegetation communities, along with vegetation statistics, hardcopy maps and orthophoto images plotted at large scale corresponding to the park area.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Just over 698 acres, including 214 acres in the authorized boundary of HOME and an additional 484 acres in the environs, were mapped using ten map classes (Figure 5). This included four land cover classes and six vegetation classes. Of all the map units, the most frequent was Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest with 21 polygons. Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest was also the most abundant map unit in terms of area other than cropfields in the environs, covering 219 acres (89 hectares) or about 13% of the project area. All of the frequencies for each map unit (i.e., number of polygons) along with acreage per map unit are listed in Table 3. Normally the standard minimum mapping unit for NPS vegetation mapping projects is defined as 0.5 hectare. However this is a nominal unit and due to the small size of HOME and the resolution of the imagery it was reduced to allow for more detail in the mapping. Therefore, 13 of the total 60 polygons were under 0.5 hectare. The average area of polygons for this project was 28.8 acres (11.6 hectares).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Just over 698 acres, including 214 acres in the authorized boundary of HOME and an additional 484 acres in the environs, were mapped using ten map classes (Figure 5). This included four land cover classes and six vegetation classes. Of all the map units, the most frequent was Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest with 21 polygons. Fraxinus pennsylvanica / Ulmus spp. / Celtis occidentalis Forest was also the most abundant map unit in terms of area other than cropfields in the environs, covering 219 acres (89 hectares) or about 13% of the project area. All of the frequencies for each map unit (i.e., number of polygons) along with acreage per map unit are listed in Table 3. Normally the standard minimum mapping unit for NPS vegetation mapping projects is defined as 0.5 hectare. However this is a nominal unit and due to the small size of HOME and the resolution of the imagery it was reduced to allow for more detail in the mapping. Therefore, 13 of the total 60 polygons were under 0.5 hectare. The average area of polygons for this project was 28.8 acres (11.6 hectares).

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Following the vegetation plot data analysis, the preliminary vegetation map was edited and refined to produce a revised preliminary vegetation map prior to thematic accuracy assessment (AA). Using ArcMap 9.2 (ESRI 1999-2006), polygon boundaries were revised on-screen using the newly acquired aerial orthophotography (digital photomosaic) based on the classification plot data, field observations, classification analyses, aerial photography signatures, and topographic maps. Each polygon was assigned the USNVC Community Element Global (CEGL) code of a preliminary vegetation association based on the information sources listed above. Second, third, and fourth CEGL code choices were entered in cases of uncertainty, or for polygons representing mosaics of two or more vegetation types.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Several imagery sources were used to derive the vegetation map, primarily Light Imaging and Detection Radar (LiDAR) and aerial imagery from the National Agriculture Imagery Program. The eCognition software package and Berkley Imaging Segmentation was used to create the initial image segments and polygon map. The mean values of variable inputs were summarized for each of the training data polygons and were used to generate a predictive non-parametric model using RandomForest in the statistical program R. The model was then applied to all polygons. The resulting draft map was reviewed by experts familiar with the vegetation types of the area. The final map includes 24 classes, representing 3 land cover types and 21 alliance-based map classes. A field-based, blind random sample accuracy assessment of the map was carried out in mid-August 2011 and December 2011. A total of 175 accuracy assessment points were collected. Based on the assessment, the total map accuracy was 88.9%, exceeding the program standard of 80%.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Several imagery sources were used to derive the vegetation map, primarily Light Imaging and Detection Radar (LiDAR) and aerial imagery from the National Agriculture Imagery Program. The eCognition software package and Berkley Imaging Segmentation was used to create the initial image segments and polygon map. The mean values of variable inputs were summarized for each of the training data polygons and were used to generate a predictive non-parametric model using RandomForest in the statistical program R. The model was then applied to all polygons. The resulting draft map was reviewed by experts familiar with the vegetation types of the area. The final map includes 24 classes, representing 3 land cover types and 21 alliance-based map classes. A field-based, blind random sample accuracy assessment of the map was carried out in mid-August 2011 and December 2011. A total of 175 accuracy assessment points were collected. Based on the assessment, the total map accuracy was 88.9%, exceeding the program standard of 80%.

The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. Several imagery sources were used to derive the vegetation map, primarily Light Imaging and Detection Radar (LiDAR) and aerial imagery from the National Agriculture Imagery Program. The eCognition software package and Berkley Imaging Segmentation was used to create the initial image segments and polygon map. The mean values of variable inputs were summarized for each of the training data polygons and were used to generate a predictive non-parametric model using RandomForest in the statistical program R. The model was then applied to all polygons. The resulting draft map was reviewed by experts familiar with the vegetation types of the area. The final map includes 24 classes, representing 3 land cover types and 21 alliance-based map classes. A field-based, blind random sample accuracy assessment of the map was carried out in mid-August 2011 and December 2011. A total of 175 accuracy assessment points were collected. Based on the assessment, the total map accuracy was 88.9%, exceeding the program standard of 80%.