This digital dataset contains the name and location for the inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000-square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006b). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries. Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network. The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions (WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains the monthly inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries. Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network. The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions (WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains the monthly inflows to the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries. Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network. The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions (WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains the monthly inflows to the surface water network in the updated Central Valley Hydrologic Model (CVHM2) for water years 1922-2019. The surface water inflows are simulated through the Streamflow Routing Package (SFR2) using 65 inflows locations, 271 stream segments that represent 4043 stream reaches, and 13 bifurcations that comprise the stream network. The bifurcations simulate the bypass canals that are used for flood control by routing water between two stream reach locations within the stream network. This dataset includes the inflow and bifurcation locations, monthly magnitude, and shapefiles of the gridded and non-gridded stream network.

This digital dataset contains the monthly inflows to the surface water network in the updated Central Valley Hydrologic Model (CVHM2) for water years 1922-2019. The surface water inflows are simulated through the Streamflow Routing Package (SFR2) using 65 inflows locations, 271 stream segments that represent 4043 stream reaches, and 13 bifurcations that comprise the stream network. The bifurcations simulate the bypass canals that are used for flood control by routing water between two stream reach locations within the stream network. This dataset includes the inflow and bifurcation locations, monthly magnitude, and shapefiles of the gridded and non-gridded stream network.

This digital dataset contains 61 sets of annual streamflow gains and losses between 1961 and 1977 along Central Valley surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS's numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Quantitative observations of streamflow gains and losses were available for 57 reaches of 20 major stream systems in the Central Valley for water years 1961-77 (Mullen and Nady, 1985). These observations were included in parameter estimation process and in the model-fit statistics. The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains 61 sets of annual streamflow gains and losses between 1961 and 1977 along Central Valley surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS's numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Quantitative observations of streamflow gains and losses were available for 57 reaches of 20 major stream systems in the Central Valley for water years 1961-77 (Mullen and Nady, 1985). These observations were included in parameter estimation process and in the model-fit statistics. The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains monthly reference evapotranspiration (ETo) data for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006b). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles on a finite-difference grid comprising 441 rows and 98 columns. Slightly less that 50 percent of the cells are active. The CVHM grid has a uniform horizontal discretization of 1x1 square mile and is oriented parallel to the valley axis, 34 degrees west of north (Faunt, 2009). The main climatic contributors to the CVHM are ETo and precipitation. Data from Parameter-Elevation Regressions on Independent Slopes Model (PRISM) (Climate Source, 2006) provide the temperature and precipitation on a monthly basis for a 2-kilometer grid. Mapping land-use type and distribution is integral to calculating the crop irrigation demand and, ultimately, the water use in the Central Valley. For a given land use, the demand can be calculated from two variables: crop coefficient (Kc) and reference evapotranspiration (ETo). For the CVHM, ETo is calculated from the daily minimum and maximum air temperatures derived from PRISM data and the extraterrestrial solar radiation (Faunt, 2009, p. 151). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains monthly reference evapotranspiration (ETo) data for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006b). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles on a finite-difference grid comprising 441 rows and 98 columns. Slightly less that 50 percent of the cells are active. The CVHM grid has a uniform horizontal discretization of 1x1 square mile and is oriented parallel to the valley axis, 34 degrees west of north (Faunt, 2009). The main climatic contributors to the CVHM are ETo and precipitation. Data from Parameter-Elevation Regressions on Independent Slopes Model (PRISM) (Climate Source, 2006) provide the temperature and precipitation on a monthly basis for a 2-kilometer grid. Mapping land-use type and distribution is integral to calculating the crop irrigation demand and, ultimately, the water use in the Central Valley. For a given land use, the demand can be calculated from two variables: crop coefficient (Kc) and reference evapotranspiration (ETo). For the CVHM, ETo is calculated from the daily minimum and maximum air temperatures derived from PRISM data and the extraterrestrial solar radiation (Faunt, 2009, p. 151). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).

This digital dataset contains the name and location for the diversions from the surface-water network for the Central Valley Hydrologic Model (CVHM). The Central Valley encompasses an approximate 50,000 square-kilometer region of California. The complex hydrologic system of the Central Valley is simulated using the USGS numerical modeling code MODFLOW-FMP (Schmid and others, 2006). This simulation is referred to here as the CVHM (Faunt, 2009). Utilizing MODFLOW-FMP, the CVHM simulates groundwater and surface-water flow, irrigated agriculture, land subsidence, and other key processes in the Central Valley on a monthly basis from 1961-2003. The total active modeled area is 20,334 square-miles. The CVHM includes complex surface-water management processes. The hydrology of the present-day Central Valley and the CVHM model are driven by surface-water deliveries and associated groundwater pumpage. The Streamflow Routing Package (SFR1) is linked to MODFLOW-FMP to facilitate the simulated conveyance of surface-water deliveries. If surface-water deliveries do not meet the farm-delivery requirement, the FMP invokes simulated groundwater pumping to meet the demand. The surface-water network represents a subset of the entire stream network in the valley. Even so, it covers about 3,000 kilometers of surface-water and is simulated using 208 stream segments that represent 2244 stream reaches, with 43 inflows and 66 diversion locations providing 64 routed and 41 non-routed deliveries. Most of these inflows are regulated by dams and most of the deliveries are conveyed through an extensive canal network. The routed deliveries are conveyed through the simulated surface-water network, while the non-routed delivery conveyance typically occurs through small canals or diversion ditches and are not directly simulated. Much of the surface-water diversion and delivery information was compiled by the California Department of Water Resources (DWR) for 21 water-balance subregions (WBSs) covering the valley floor (C. Brush, California Department of Water Resources, written commun., February 21, 2007). The CVHM is the most recent regional-scale model of the Central Valley developed by the U.S. Geological Survey (USGS). The CVHM was developed as part of the USGS Groundwater Resources Program (see "Foreword", Chapter A, page iii, for details).