This data set contains Application for Permit to Drill.

This data set contains Application for Permit to Drill.

This data set contains releasable wellbore header metadata for wells drilled in the Gulf of Mexico Outer Continental Shelf. It includes primary identifiers such as API Number and Lease Number along with location information such as Area/Block and Latitude/Longitude.

This data set contains releasable wellbore header metadata for wells drilled in the Gulf of America Outer Continental Shelf. It includes primary identifiers such as API Number and Lease Number along with location information such as Area/Block and Latitude/Longitude.

This data set contains only Applications for Permit to Drill (APD) that were submitted via eWell since April 2004.

This data set contains only Applications for Permit to Drill (APD) that were submitted via eWell since April 2004.

Temperature measurement data obtained from boreholes for the Association of American State Geologists (AASG) geothermal data project. Typically bottomhole temperatures are recorded from log headers, and this information is provided through a borehole temperature observation service for each state. Service includes header records, well logs, temperature measurements, and other information for each borehole. Information presented in Geothermal Prospector was derived from data aggregated from the borehole temperature observations for all states. For each observation, the given well location was recorded and the best available well identifier (name), temperature and depth were chosen. The "Well Name Source," "Temp. Type" and "Depth Type" attributes indicate the field used from the original service. This data was then cleaned and converted to consistent units. The accuracy of the observation's location, name, temperature or depth was note assessed beyond that originally provided by the service. Bottom hole temperature datasets from the AASG were downloaded from repository.usgin.org between May 16 and May 24, 2013. The data were cleaned to remove null and non-real entries, and units were standardized across all datasets. When selecting key attributes, specific criteria were used to determine the best available values. For temperature, corrected temperature was preferred, followed by measured temperature. For depth, depth of measurement was prioritized, with true vertical depth and driller total depth used as alternatives. Well identification was assigned based on the API number when available, followed by the well name, with the observation URI used as a last option.

AASG Wells Data for the EGS Test Site Planning and Analysis Task Temperature measurement data obtained from boreholes for the Association of American State Geologists (AASG) geothermal data project. Typically bottomhole temperatures are recorded from log headers, and this information is provided through a borehole temperature observation service for each state. Service includes header records, well logs, temperature measurements, and other information for each borehole. Information presented in Geothermal Prospector was derived from data aggregated from the borehole temperature observations for all states. For each observation, the given well location was recorded and the best available well identifier (name), temperature and depth were chosen. The "Well Name Source," "Temp. Type" and "Depth Type" attributes indicate the field used from the original service. This data was then cleaned and converted to consistent units. The accuracy of the observation's location, name, temperature or depth was note assessed beyond that originally provided by the service. - AASG bottom hole temperature datasets were downloaded from repository.usgin.org between the dates of May 16th and May 24th, 2013. - Datasets were cleaned to remove null and non-real entries, and data converted into consistent units across all datasets - Methodology for selecting best temperature and depth attributes from column headers in AASG BHT Data sets: Temperature: CorrectedTemperature - best MeasuredTemperature - next best Depth: DepthOfMeasurement - best TrueVerticalDepth - next best DrillerTotalDepth - last option Well Name/Identifier: APINo - best WellName - next best ObservationURI - last option The column headers are as follows: gid = internal unique ID src_state = the state from which the well was downloaded (note: the low temperature wells in Idaho are coded as "ID_LowTemp", while all other wells are simply the two character state abbreviation) source_url = the url for the source WFS service or Excel file temp_c = "best" temperature in Celsius temp_type = indicates whether temp_c comes from the corrected or measured temperature header column in the source document depth_m = "best" depth in meters depth_type = indicates whether depth_m comes from the measured, true vertical, or driller total depth header column in the source document well_name = "best" well name or ID name_src = indicates whether well_name came from apino, wellname, or observationuri header column in the source document lat_wgs84 = latitude in wgs84 lon_wgs84 = longitude in wgs84 state = state in which the point is located county = county in which the point is located

Other available resources including downloadable data and links to other related sites

Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.