High-resolution multibeam data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder.

High-resolution multibeam data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder.

High-resolution multibeam data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder.

These metadata describe bathymetry collected during a 2015 multibeam echosounder survey near Cross Sound, southeast Alaska. Data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game (ADFG) aboard the ADFG R/V Solstice during USGS field activity 2015-629-FA. The bathymetry data are published here as a 32-bit GeoTIFF image.

These metadata describe bathymetry collected during a 2015 multibeam echosounder survey near Cross Sound, southeast Alaska. Data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game (ADFG) aboard the ADFG R/V Solstice during USGS field activity 2015-629-FA. The bathymetry data are published here as a 32-bit GeoTIFF image.

Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to June 11, 2016. Data were collected aboard the Alaska Department of Fish and Game research vessel Medeia using a Reson SeaBat 7160 multibeam echosounder. This data release contains approximately 453 square kilometers of multibeam bathymetric and backscatter data gridded at 10-meter resolution. Multibeam water column imagery and seismic profile data also collected during this survey are not published in this data release

Marine geophysical mapping of the Queen Charlotte Fault in the eastern Gulf of Alaska was conducted in 2016 as part of a collaborative effort between the U.S. Geological Survey and the Alaska Department of Fish and Game to understand the morphology and subsurface geology of the entire Queen Charlotte system. The Queen Charlotte fault is the offshore portion of the Queen Charlotte-Fairweather Fault: a major structural feature that extends more than 1,200 kilometers from the Fairweather Range of southern Alaska to northern Vancouver Island, Canada. The data published in this data release were collected along the Queen Charlotte Fault between Cross Sound and Noyes Canyon, offshore southeastern Alaska from May 18 to June 11, 2016. Data were collected aboard the Alaska Department of Fish and Game research vessel Medeia using a Reson SeaBat 7160 multibeam echosounder. This data release contains approximately 453 square kilometers of multibeam bathymetric and backscatter data gridded at 10-meter resolution. Multibeam water column imagery and seismic profile data also collected during this survey are not published in this data release

Single-beam bathymetry data were collected in 2010 and 2011 in the nearshore waters around Barter Island, Arey Island, and within Arey Lagoon, Alaska. Measurements were made from a small boat or dinghy using one of three systems: a Humminbird 898 SI Fish Finder with integrated GPS (2010 and 2011), an Ohmex Sonarmite BT integrated with a Trimble GeoHX series GPS (2011), or a Garmin Sounder with integrated GPS (2011). Each system collected single-beam water depth with accuracies better than 4 meters (m) horizontal and 25 centimeters (cm) vertical.

Single-beam bathymetry data were collected in 2010 and 2011 in the nearshore waters around Barter Island, Arey Island, and within Arey Lagoon, Alaska. Measurements were made from a small boat or dinghy using one of three systems: a Humminbird 898 SI Fish Finder with integrated GPS (2010 and 2011), an Ohmex Sonarmite BT integrated with a Trimble GeoHX series GPS (2011), or a Garmin Sounder with integrated GPS (2011). Each system collected single-beam water depth with accuracies better than 4 meters (m) horizontal and 25 centimeters (cm) vertical.

Bathymetry data were collected in the Wainwright Inlet, the mouth of the Kuk River, and in the nearshore region off Wainwright, Alaska, in August of 2009. Bathymetry was measured with a single-beam echo-sounder (10 Hz 144 ODOM Echotrac CV-100) mounted on the stern of a small vessel and synchronized to a 145 Real-Time Kinematic (RTK) Global Positioning Systems (GPS). The depth is measured relative to approximate Mean Sea Level (see attribute accuracy report in this file for further details on the MSL), and depth values are meters below the water surface. The GPS sampling rate was 1 Hz with vehicle speeds maintained at less than 15 km/hour, resulting in a sample point resolution of 3-5 meters. Data are available in a single csv file.