This dataset includes chemical, meteorological, physical and time series data collected from MOORINGS_KEO_145E_32N in the North Pacific Ocean from 2011-11-08 to 2016-08-02. These data include BAROMETRIC PRESSURE, DISSOLVED OXYGEN, OXYGEN - PERCENT SATURATION, SALINITY and SEA SURFACE TEMPERATURE. The instruments used to collect these data include Carbon dioxide (CO2) gas analyzer. These data were collected by Charles L. Stump, Mariela R. T. White, Seth M. Bushinsky, and Steven R. Emerson of University of Washington (UW) as part of the Moorings_KEO_145E_32N_O2_N2 dataset. CDIAC associated the following cruise ID(s) with this dataset: KEO_20111108 The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).

This dataset includes chemical, discrete bottle, physical and time series profile data collected from Kairei, MIRAI and NATSUSHIMA in the North Pacific Ocean and South Pacific Ocean from 1999-05-28 to 2008-10-26 and retrieved during cruise Time Series K2. These data include ALKALINITY - TOTAL, AMMONIUM, DISSOLVED INORGANIC CARBON, DISSOLVED OXYGEN, NITRATE, NITRITE, PHOSPHATE, SALINITY, SIGMA-THETA, SILICATE and TEMPERATURE. The instruments used to collect these data include bottle. These data were collected by Masahide Wakita and Shuichi Watanabe of JAMSTEC; Mutsu Institute for Oceanography (MIO), Makio Honda of Japan Agency for Marine-Earth Science and Technology (JAMSTEC), and Akihiko Murata of Meteorological Research Institute as part of the Time_Series_K2 dataset.

This dataset includes chemical, meteorological, physical and time series data collected from Mooring CRIMP1_158W_21N in the North Pacific Ocean from 2005-12-01 to 2008-05-30. These data include air-sea difference - partial pressure of carbon dioxide (pCO2), barometric pressure, oxygen, pCO2 - atmosphere, pCO2 - water, pH on the total scale, sea surface salinity and sea surface temperature. The Moored Autonomous pCO2 (MAPCO2®) instruments used to collect these data include Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer, Humidity Sensor, and oxygen meter. The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).

This dataset includes chemical, physical, time series and underway - surface data collected from METEOR, POSEIDON, TALIARTE and VICTOR HENSEN in the North Atlantic Ocean and South Atlantic Ocean from 1995-10-02 to 2009-11-25 and retrieved during cruise ESTOC cruises. These data include ALKALINITY - TOTAL, CARBON DIOXIDE - PARTIAL PRESSURE (pCO2), DISSOLVED INORGANIC CARBON, SALINITY, SEA SURFACE TEMPERATURE and pH. The instruments used to collect these data include Carbon dioxide (CO2) gas analyzer and Carbon dioxide (CO2) shower head chamber equilibrator. These data were collected by Melchor González-Dávila of Universidad de Las Palmas de Gran Canaria (ULPGC) as part of the ESTOC_Time_Series dataset.

This dataset includes surface chemical, meteorological, physical time series data collected from mooring CB-06_125W_43N in the North Pacific Ocean from 2017-06-10 to 2021-11-22. These data include air-sea difference - partial pressure of carbon dioxide (pCO2), barometric pressure, oxygen, pCO2 - atmosphere, pCO2 - water, salinity, sea surface temperature, oxygen, pH on total scale, total chlorophyll, nephelometric turbidity unit and salinity-compensated dissolved oxygen. The Moored Autonomous pCO2 (MAPCO2®) instruments used to collect these data include Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer, Humidity Sensor, and oxygen meter. The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).

This dataset consists of discrete validation samples collected from surface waters opportunistically proximal to the CB06 mooring (43° 18' N; 124° 32' W) either via CTD-associated Niskin bottle, vessel surface underway uncontaminated seawater intakes, or by bucket-collected surface waters. ~350-ml Samples were preserved with 40 µL saturated HgCl2, capped and stored for later in-lab analysis. Samples were analyzed first for TCO2 (µmol/kg) and then for pCO2 (µatm). Analyses were corrected for sample density, headspace pressure, and headspace-equilibration artifacts on pCO2. The system was calibrated for gas analysis with mixtures of known CO2 content in ultra pure air, that were linked to the primary standards of the Takahashi lab at LDEO. The system was calibrated for liquid analysis with >3 mixtures of NaHCO3 and Na2CO3 in distilled water and final liquid analyses were corrected using SIO CRM samples. CRM corrections for TCO2 were generally less than 1%. pCO2 is reported at in situ temperature at the time of sample collection. Additional carbonate system parameters were calculated from pCO2 and TCO2 for in situ temperature using 'CarbCalc' a custom software program developed by Hales.

This dataset includes chemical, meteorological, physical and time series data collected from Mooring_NH10_124W_44N in the North Pacific Ocean from 2014-04-03 to 2017-04-23. These data include air-sea difference - partial pressure of carbon dioxide (pCO2), barometric pressure, oxygen, pCO2 - atmosphere, pCO2 - water, salinity, sea surface temperature, oxygen, pH on total scale, total chlorophyll, nephelometric turbidity unit and salinity-compensated dissolved oxygen. The Moored Autonomous pCO2 (MAPCO2®) instruments used to collect these data include Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer, Humidity Sensor, and oxygen meter. The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).

Physical and Chemical Oceanographic Time Series (Line-P) containing profiles for Nutrients, temperature, salinity near Ocean Station PAPA (50 deg N;145 deg W). Observations start 1954 and are ongoing. CUSTODIAN or HOLDER OF THESE DATA or questions is C.S. Wong, Institute of Ocean Sciences, P.O. Box 6000, Sidney, B.C., Canada V8L 4B2 - email wongcs@dfo-mpo.gc.ca. Contact custodian or Robin Brown, Oceanographic Data Manager (email: brownro@dfo-mpo.gc.ca). Dataset URL http://www-sci.pac.dfo-mpo.gc.ca/osap/data/linep/linepselectdata_e.htm. Institution URL http://www-sci.pac.dfo-mpo.gc.ca/. CONTRIBUTOR Robin Brown

This dataset includes chemical, meteorological, physical and time series data collected from mooring Kaneohe_158W_21N in the North Pacific Ocean from 2011-09-30 to 2020-10-20. These data include air-sea difference - partial pressure of carbon dioxide (pCO2), barometric pressure, oxygen, pCO2 - atmosphere, pCO2 - water, sea surface salinity, sea surface temperature, pH on the total scale, total chlorophyll, nephelometric turbidity and salinity-compensated dissolved oxygen. The Moored Autonomous pCO2 (MAPCO2®) instruments used to collect these data include Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer, Humidity Sensor, and oxygen meter. The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).

This dataset includes chemical, meteorological, physical and time series data collected from Mooring_Alawai_158W_21N in the North Pacific Ocean from 2008-06-06 to 2021-02-18. These data include air-sea difference - partial pressure of carbon dioxide (pCO2), barometric pressure, oxygen, pCO2 - atmosphere, pCO2 - water, salinity, sea surface temperature, oxygen, pH on total scale, total chlorophyll, nephelometric turbidity unit and salinity-compensated dissolved oxygen. The Moored Autonomous pCO2 (MAPCO2®) instruments used to collect these data include Bubble type equilibrator for autonomous carbon dioxide (CO2) measurement, Carbon dioxide (CO2) gas analyzer, Humidity Sensor, and oxygen meter. The Global CO2 Time-series and Moorings Project involves international groups from 18 countries who have mounted sensors on moored buoys to provide high resolution time-series measurements of atmospheric boundary layer and surface ocean CO2 partial pressure (pCO2). The CO2 Time-series and Moorings Project is coordinated by UNESCO International Ocean Carbon Coordination Project (IOCCP).