Measurements of pH collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Chloride collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Sulfate collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Calcium collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Sodium collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Copper collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Aluminum collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Barium collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Iron collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).

Measurements of Lead collected at California Aqueduct At Check 13. Currently collected twice a year, previously collected quarterly. Access further information for this data set by contacting Bureau of Reclamation, California-Great Basin Region, Environmental Affairs Division (CGB-157). See ResultAttributes for STAFF_GAUGE, SMPL_DEPTH, SMPL_CATEGORY_NAME, METHOD_CODE, RESULT_RL, RESULT_RL-UNIT_STD_NAME, RESULT_MDL, RESULT_MDL-UNIT_STD_NAME, USBR_QA_SUBTYPE_NAME, USBR_QULFR_DESCRIPTION. STAFF_GAUGE is the water height in decimal feet measured by gauge (e.g., 15.2). SMPL_DEPTH is the vertical depth at which sample is collected (e.g., 0 - 15 cm). For water samples: depth below water/air interface. For sediment and soil samples: depth below water/solid or air/solid interface. SMPL_CATEGORY_NAME is the category type of sample (e.g., Composite). METHOD_CODE is the name of method used to obtain result (e.g., EPA 200.8). RESULT_RL is the result reporting limit (accounting for dilution) (e.g., 0.02). RESULT_RL-UNIT_STD_NAME is the unit associated with RESULT_RL (e.g., mg/L). RESULT_MDL is the result method detection limit (e.g., 0.007). RESULT_MDL-UNIT_STD_NAME is the unit associated with RESULT_MDL (e.g., mg/L). USBR_QA_SUBTYPE_NAME is the quality control type of the sample (e.g., USBR_BLANK_SPIKE). USBR_QULFR_DESCRIPTION is the quality assurance description (if any) (e.g., Result may have a high bias.).