In March of 2010, the U.S. Geological Survey (USGS) conducted geophysical surveys east of Cat Island, Mississippi. The efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U. S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geological stratigraphic framework of the Mississippi Barrier Island Complex. The data collected will be used to create baseline bathymetry information that will address seafloor change. This report contains swath bathymetry and side scan sonar data collected aboard the R/V Survey Cat during Cruise 10CCT01. A combination of software packages was used to process and grid the data. This data series describes the methodology used and the resulting data projects.

In September and October of 2010, the U.S. Geological Survey (USGS), in cooperation with the Army Corps of Engineers (USACE), conducted geophysical surveys around Cat Island, Miss. to collect bathymetry, acoustical backscatter, and seismic reflection data (seismic-reflection data have been published separately, Forde and others, 2012). The geophysical data along with sediment vibracore data (yet to be published) will be integrated to analyze and produce a report describing the geomorphology and geologic evolution of Cat Island. Interferometric swath bathymetry, and acoustical backscatter data were collected aboard the RV G.K. Gilbert during the first cruise which took place September 7-15, 2010. Single-beam bathymetry was collected in very shallow water around the island aboard the RV Streeterville from September 28 through October 2, 2010 to bridge the gap between the landward limit of the previous cruise and the shoreline. The survey area extended from the nearshore to approximately 5 kilometers (km) offshore to the north, south, and west, and approximately 2 km to the east. This report archives bathymetry and acoustical backscatter data and provides information and mapping products essential for completion of the project goals. The bathymetry will provide elevations and show geomorphic characteristics of the seafloor, while the backscatter and acoustical backscatter imagery will enhance the geomorphic characteristics and give insight to variations of sediment types on the seafloor. This file contains the trackline locations and names for swath bathymetry and acoustic backscatter data around Cat Island, Miss.

In September and October of 2010, the U.S. Geological Survey (USGS), in cooperation with the Army Corps of Engineers (USACE), conducted geophysical surveys around Cat Island, Miss. to collect bathymetry, acoustical backscatter, and seismic reflection data (seismic-reflection data have been published separately, Forde and others, 2012). The geophysical data along with sediment vibracore data (yet to be published) will be integrated to analyze and produce a report describing the geomorphology and geologic evolution of Cat Island. Interferometric swath bathymetry, and acoustical backscatter data were collected aboard the RV G.K. Gilbert during the first cruise which took place September 7-15, 2010. Single-beam bathymetry was collected in very shallow water around the island aboard the RV Streeterville from September 28 through October 2, 2010 to bridge the gap between the landward limit of the previous cruise and the shoreline. The survey area extended from the nearshore to approximately 5 kilometers (km) offshore to the north, south, and west, and approximately 2 km to the east. This report archives bathymetry and acoustical backscatter data and provides information and mapping products essential for completion of the project goals. The bathymetry will provide elevations and show geomorphic characteristics of the seafloor, while the backscatter and acoustical backscatter imagery will enhance the geomorphic characteristics and give insight to variations of sediment types on the seafloor. This file contains the trackline locations and names of the single-beam bathymetry around Cat Island, Miss.

In April of 2010, the U.S. Geological Survey (USGS) conducted a geophysical survey from the east end of West Ship Island, MSiss., extending to the middle of Dauphin Island, Ala. This survey had a dual purpose: (1) to interlink previously conducted nearshore geophysical surveys (shoreline to ~2 kilometers, km) with those of offshore surveys (~2 km to ~9 km) in the ares and (2) to extend the geophysical survey to include a portion of the Dauphin Island nearshore zone. The efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geological stratigraphic framework of the Mississippi Barrier Island Complex.

The United States Geological Survey Saint Petersburg Coastal and Marine Science Center (USGS SPCMSC), in cooperation with the United States Army Corps of Engineers (USACE) conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi (GUIS). Camille Cut separates Ship Island into East Ship Island and West Ship Island. The objective of this study was to establish base-level elevation conditions around West Ship Island, East Ship Island, Horn Island and their associated active littoral system prior to restoration activities. These activities include the closure of Camille Cut and the placement of sediment in the littoral zone of West Ship Island. This survey will be used to verify sediment migration patterns by monitoring elevation change over time. The dataset produced by this survey will also be compared with historic bathymetric datasets to help further understand island elevation over time. This data release provides 667-line kilometers (km) of processed Single-Beam Bathymetry (SBB) data and 773-line km of processed Interferometric Bathymetry (IFB) collected by the USGS SPCMSC in July 2016 (field activity number [FAN] 2016-347-FA). The IFB data were acquired aboard the Research Vessel (RV) Sallenger (subFAN, 16BIM04), and the SBB data were acquired aboard the RV Jabba Jaw (subFAN, 16BIM05) and the RV Mako (subFAN, 16BIM06). The IFB and SBB point data are provided in three datums: 1) the International Terrestrial Reference Frame of 2000 (ITRF00), ellipsoid height (-49.70 meters [m] to -28.87 m); 2) the North American Datum of 1983 (NAD83) CORS96 realization and the North American Vertical Datum 1988 (NAVD88) with respect to the GEOID12B model (-0.07 m to -20.69 m); and 3) NAD83 (CORS96) and Mean Lower Low Water (MLLW) (-0.04 m to -20.60 m). This metadata record describes the comprehensive, 50-meter (m) Digital Elevation Model (DEM) created from the IFB and SBB point data and provided in NAD83 NAVD88 GEOID12B. For additional information regarding data collection and processing, please refer to the field logs and formal Federal Geographic Data Committee (FGDC) metadata for the individual XYZ point data files and survey trackline shapefiles also included within this data release (https://doi.org/10.5066/F7B8571Q).

In 2010, the U.S. Geological Survey in Woods Hole, MA and St. Petersburg, FL, in partnership with the U.S. Army Corps of Engineers, Mobile District conducted geologic mapping to characterize the seafloor and shallow subsurface stratigraphy offshore of the Gulf Islands of Mississippi. The mapping was carried out during two cruises in March, 2010 on the R/V Tommy Munro of Biloxi, MS. Data were acquired with the following equipment: an SEA Ltd SwathPlus interferometric sonar (both 234 kHz and 468 kHz systems), a Klein 3000 and a Klein 3900 dual frequency sidescan-sonar, and an Edgetech 512i chirp subbottom profiling system. The long-term goal of this mapping effort is to produce high-quality, high-resolution geologic maps and geophysical interpretations that can be utilized to identify sand resources within the region and better understand the Holocene evolution and anticipate future changes in this coastal system. More information on the field work can be accessed from the Woods Hole Coastal and Marine Science Center Field Activity webpage https://cmgds.marine.usgs.gov/fan_info.php?fan=2010-012-FA or the St. Petersburg Coastal and Marine Geology InfoBank https://walrus.wr.usgs.gov/infobank/m/m210gm/html/m-2-10-gm.meta.html.

This part of DS 781 presents data for the bathymetry map of the Offshore of Ventura map area, California. The raster data file is included in "Bathymetry_OffshoreVentura.zip, which is accessible from https://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Cochrane, G.R., Golden, N.E., Phillips, E.L., Ritchie, A.C., Kvitek, R.G., Greene, H.G., Krigsman, L.M., Endris, C.A., Seitz, G.G., Gutierrez, C.I., Sliter, R.W., Erdey, M.D., Wong, F.L., Yoklavich, M.M., Draut, A.E., and Hart, P.E. (S.Y. Johnson and S.A. Cochran, eds.), 2013, California State Waters Map Series—Offshore of Ventura, California: U.S. Geological Survey Scientific Investigations Map 3254, pamphlet 42 p., 11 sheets, scale 1:24,000, https://doi.org/10.3133/sim3254. The bathymetry maps of the Offshore of Ventura map area, California, was generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). Most of the offshore area was mapped by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.

This part of DS 781 presents data for the bathymetry and shaded-relief maps of the Offshore of Point Reyes map area, California. Raster data file is included in "Bathymetry_PointReyes.zip," which is accessible from https://pubs.usgs.gov/ds/781/PointReyes/data_catalog_PointReyes.html. These data accompany the pamphlet and map sheets of Watt, J.T., Dartnell, P., Golden, N.E., Greene, H.G., Erdey, M.D., Cochrane, G.R., Johnson, S.Y., Hartwell, S.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Sliter, R.W., Krigsman, L.M., Lowe, E.N., and Chin, J.L. (J.T. Watt and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Point Reyes, California: U.S. Geological Survey Open-File Report 2015–1114, pamphlet 39 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151114. The bathymetry map of the Offshore of Point Reyes map area, California, was generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. NOTE: the horizontal datum of the bathymetry data (NAD83) differs from the horizontal datum of other layers in this DS (WGS84). These data are not intended for navigational purposes.

This part of DS 781 presents data for the shaded-relief bathymetry map of the Offshore of Tomales Point map area, California. Raster data file is included in "BathymetryHS_OffshoreTomalesPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreTomalesPoint/data_catalog_OffshoreTomalesPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Greene, H.G., Erdey, M.D., Cochrane, G.R., Watt, J.T., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Tomales Point, California: U.S. Geological Survey Open-File Report 2015–1088, pamphlet 38 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151088. The hillshaded bathymetry map of the Offshore of Tomales Point Map Area, California, was generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), by Fugro Pelagos, and by the U.S. Geological Survey. Mapping was completed between 2004 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 234-kHz and 468-kHz SEA SWATHPlus phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.

In August of 2013, the U.S. Geological Survey (USGS) conducted geophysical surveys offshore of Petit Bois Island, Mississippi. These efforts are a continued part of the U.S. Geological Survey Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project, by mapping the shallow geologic stratigraphic framework of the Mississippi Barrier Island Complex. These geophysical surveys will provide the data necessary for scientists to define, interpret, and provide baseline bathymetry and seafloor habitat for this area to aid scientists in predicting future geomorphological changes to the islands with respect to climate change, storm impacts, and sea level rise. Furthermore, these data combined with the geomorphological results will provide the properties and extent of local offshore sand sediment resources available for planning and execution of the Gulf Islands National Seashore barrier island restoration. The geophysical data were collected during one cruise (USGS Field Activity Numbers 13CCT04) aboard the University of Southern Mississippi Research Vessel Tommy Munro offshore along the gulf side of Petit Bois Island, Gulf Islands National Seashore, Mississippi. Data were acquired with the following equipment: a Systems Engineering and Assessment, Ltd., SWATHplus interferometric sonar (468 kilohertz (kHz)), an EdgeTech 424 (4-24 kHz), an EdgeTech 525i chirp sub-bottom profiling system, and a Klein 3900 sidescan sonar system. This report serves as an archive of the processed interferometric swath bathymetry and sidescan sonar data. Geographic information system data products include an interpolated digital elevation model, an acoustic backscatter mosaic, a trackline map, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation. Any use of trade names is for descriptive purposes only and does not imply endorsement by the U.S. Government.