Satellite and receiver clock products derived from analysis of Global Navigation Satellite System (GNSS) data. These products are the generated by analysis centers in support of the International GNSS Service (IGS) and combined by the IGS analysis coordinator to form the official IGS rapid clock product (daily).

Satellite and receiver clock products derived from analysis of Global Navigation Satellite System (GNSS) data. These products are the generated by analysis centers in support of the International GNSS Service (IGS) and combined by the IGS analysis coordinator to form the official IGS final clock product (weekly).

Satellite and receiver clock products derived from analysis of Global Navigation Satellite System (GNSS) data. These products are the generated by analysis centers in support of the International GNSS Service (IGS) and combined by the IGS analysis coordinator to form the official IGS real-time clock product (daily). This product is used for comparison purposes.

This derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.

Precise satellite orbits derived from analysis of Global Navigation Satellite System (GNSS) data. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce precise orbits identifying the position and velocity of the GNSS satellites. The orbits derived from real-time data streams are used for comparison purposes.

This derived product set consists of Global Navigation Satellite System satellite and receiver clock products (10-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. These clock products are generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. The product streams are combination solutions generated by processing individual real time solutions from participating IGS Real-time Analysis Centers (ACs). The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This derived product solution is one of the RTS solutions generated by decoding the real-time product streams. These files use the real-time data streams that are referred to the satellite center-of-mass (CoM). These clock products have been provided in support of the IGS Real-Time Service (previously Real-Time Pilot Project) since February 2009, prior to the availability of real-time product streams. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.

Precise satellite orbits derived from analysis of Global Navigation Satellite System (GNSS) data. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce precise orbits identifying the position and velocity of the GNSS satellites. These orbits are determined sub-daily (ultra-rapid generation), daily (rapid generation), and weekly (final IGS product). The IGS Analysis Center Coordinator retrieves these individual solutions and generates the official IGS combined orbit products. The orbits generated by the individual ACs and the combination products generated by the ACCs are available at the CDDIS. These orbits can be used to determine precise coordinates of the observing stations, gravity field parameters, and Earth orientation parameters. The Ultra-rapid products are available for real time and near real time use and include predicted orbit information.

Precise satellite orbits derived from analysis of Global Navigation Satellite System (GNSS) data. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce precise orbits identifying the position and velocity of the GNSS satellites. These orbits are determined sub-daily (ultra-rapid generation), daily (rapid generation), and weekly (final IGS product). The IGS Analysis Center Coordinator retrieves these individual solutions and generates the official IGS combined orbit products. The orbits generated by the individual ACs and the combination products generated by the ACCs are available at the CDDIS. These orbits can be used to determine precise coordinates of the observing stations, gravity field parameters, and Earth orientation parameters.

Weekly station positions and velocity solutions in Software INdependent EXchange (SINEX) format derived from analysis of Global Navigation Satellite System (GNSS) data. These products are the generated by analysis centers in support of the International GNSS Service (IGS) and combined by the IGS reference frame coordinator to form the official IGS station position product (weekly).

This derived product set consists of Global Navigation Satellite System satellite orbit products (daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. These products include satellite orbit, satellite and station clock, and station position solutions. They are generated multi-GNSS data in support of the IGS Multi-GNSS Experiment (MGEX). The observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS and downloaded by analysis centers who generate these MGEX products. More information about the MGEX products is available at: https://cddis.nasa.gov/Data_and_Derived_Products/GNSS/gnss_mgex.html.