This digital dataset contains the rural pumping dataset used to develop the Multi Node Well (MNW2) Package in the updated Central Valley Hydrologic Model (CVHM2). It includes well locations, well properties, and pumping rates for rural pumping.

This digital dataset contains datasets used to develop the Multi Node Well (MNW2) Package in CVHM2. It includes well locations, well properties for Municipal Pumping, Rural Pumping, Recovery Pumping, and Agricultural Pumping. The data release also includes pumping rates for Municipal Pumping, Rural Pumping, Recovery Pumping. Agricultural Pumping are estimated in CVHM2 by the farm process, and thus are not included in the virtual farm well child item. The data release also documents how urban water use was estimated in CVHM2 from population and other base datasets.

This digital dataset contains the municipal pumping dataset used to develop the Multi Node Well (MNW2) Package in the updated Central Valley Hydrologic Model (CVHM2). It includes well locations, well properties, and pumping rates for Municipal Pumping.

This digital dataset contains information about the farm process parameter values are used as input to the updated Central Valley Hydrologic Model (CVHM2), which consists of 24 land use types and the corresponding monthly crop coefficient for each land use type. Land use types, initial rooting depths, and initial crop coefficients were modified from Faunt and Others (2009).

This digital dataset contains groundwater level observations for 364 wells, in addition to well construction information, from 1916 to 2014 in the Central Valley, California. Groundwater level observations are used to create groundwater level contours and to calibrate the groundwater levels for the updated Central Valley Hydrologic Model (CVHM2). Groundwater level observations were collected from five sources (USGS, 2018; SLDMWA, 2018; CADWR, 2004; CRNA, 2018).

The original Central Valley Hydrologic Model (CVHM) did not simulate tile drain discharge in the west side of the San Joaquin Valley. The updated Central Valley Hydrologic Model (CVHM2) does simulate on-farm drains. The data for the drain flow and locations were obtained from the Berkeley National Laboratory is from (WESTSIM2) (N. Quinn, Berkeley National Laboratory, written communication., 2010). This component of the data release includes:e (1) three datasets included are a spreadsheet of the available observations with the drain flows in acre-ft/month, (2) a shapefile of the WESTSIM2 drain cells, and (3) a shapefile of the original WESTSIM2 drain cells translated to the CVHM2 model grid.

This data release provides updated borehole information to build upon and further refine a three-dimensional (3-D) texture model of valley-fill deposits in the Central Valley created by Faunt and others (2009). This model aids in understanding the aquifer system of the entire valley and will be later utilized in a groundwater flow model. The original database contained approximately 8,500 boreholes and with the addition of new data, the model now contains 14,683 boreholes. The new borehole lithologic data was sourced from the California Department of Water Resources (DWR) Online System of Well Completion Reports (OSWCR) and the California Central Valley Groundwater-Surface Water Simulation Model (C2VSim). This dataset contains (1) tabular data of individual borehole general location and construction information, (2) downhole lithologic interval data derived from well driller’s lithology logs and parsed to a series of textural descriptors.

This digital dataset includes three sets of observational data (groundwater level, streamflow, subsidence) used to calibrate the updated Central Valley Hydrologic Model (CVHM2). CVHM2 is a tool that can be used to quantify the sustainability of groundwater resources in the Central Valley.

This digital dataset contains the soil data for the updated Central Valley Hydrologic Model (CVHM2). The soil data is based on California Department of Water Resource’s C2VSim’s fine grid model soil curve number data set (C2VSimFG Version 1.0 - Datasets; CNRA, 2011). These values were originally obtained from the U.S. Department of Agriculture (USDA) Natural Resources Conservation Service (NRCS) Soil Survey Geographic Database (SSURGO) soil map of the State of California (USDA, 2004), and then an area-weighted average value for each hydrologic soil group within each subregion was calculated to the C2VSim element. Curve number values obtained from SSURGO were converted for use in C2VSimFG. To translate the curve number from the C2VSim grid to the CVHM2 grid, the curve number from the C2VSim that covered the largest area of a CVHM2 cell was used as zone number. There were 8 unique curve numbers in C2VSimFG. Then each of these numbers were given a different zone number for each of the four regions (Sacramento, Delta-Eastside, San Joaquin, and Tulare), resulting in 26 unique zones for CVHM2. The use of regional zones for curve numbers along with that introduced by the large scale of cell sizes (one square mile) introduces some unavoidable errors into the calculations, but this is expected for errors inherent in estimating runoff rates over such a large area without using a dedicated and complex model (Loague and Freeze, 1985).

The updated Central Valley Hydrologic Model (CVHM2) is similar to the original Central Valley Hydrologic Model (CVHM) in terms of the basic units of model discretization. Both versions simulated monthly stress periods on the same one square mile cell spatial discretization. Although the simulation period for CVHM1 was water years 1962-2003, the CVHM2 simulation period is water years 1962-2019. Both CVHM and CVHM2 have a 6 month spin up period from April-September of 1961. The CVHM2 is now composed of 13 layers compared to the ten in the CVHM. As in CVHM, hydraulic properties are generally based on percentage of coarse-grained deposits and these values are adjusted based on depth, spatial location (geomorphic province), and geologic units as described by Faunt and others (2009).